summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-13binman: Tidy up comments on _DoTestFile()Simon Glass
The comment for this function is missing an argument and the return value. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-13binman: Support reading the offset of an ELF-file symbolSimon Glass
Binman needs to be able to update the contents of an ELF file after it has been build. To support this, add a function to locate the position of a symbol's contents within the file. Fix the comments on bss_data.c and Symbol while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-13binman: Report an error if test files fail to compileSimon Glass
At present any error from the 'make' command is silently swallowed by the test system. Fix this by showing it when detected. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-13patman: Use a ValueError exception if tools.Run() failsSimon Glass
The Exception base class is a very vague and could be confusing to the test system. Use the more specific ValueError exception instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Merge branch '2021-11-12-Kconfig-migrations'Tom Rini
- An assortment of "finish migrating .." symbol patches. This will help make it harder for migrated symbols to end up again in board config.h files.
2021-11-12Convert CONFIG_LAST_STAGE_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LAST_STAGE_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Remove CONFIG_SERIAL_MULTITom Rini
This symbol has been functionally dead for a long time. Remove the last and recent re-introductions of setting it, and update the whitelist so it will not be re-introduced again. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_PL011_SERIAL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PL011_SERIAL CONFIG_PL01X_SERIAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MACB to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MACB Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MD5 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MD5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MX6 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MX6 CONFIG_MX7 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_IMX_BOOTAUX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_BOOTAUX CONFIG_IMX_THERMAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PROMPT CONFIG_SYS_PROMPT_HUSH_PS2 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_PHY_ATHEROS CONFIG_PHY_GIGE CONFIG_MII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MISC_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MISC_INIT_F CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_TRACE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TRACE CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR CONFIG_TRACE_EARLY_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_LAYERSCAPE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_LAYERSCAPE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_BITBANGMII to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_DOS_PARTITION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DOS_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ARCH_CPU_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Merge branch '2021-11-12-assorted-updates'Tom Rini
- A number of pxe related cleanups and related re-organization. - A few related pxe/sysboot/extlinux improvements - Remove some dead code. - Update Azure to use a newer Windows build environment - Add a .get_maintainer.conf file - A few minor TI SoC platform updates
2021-11-11rtc: ds1337: fix compatible string typoClemens Gruber
The driver supports the ds1339 as well, which was probably intended by the author but prevented by a typo. Fix the typo. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2021-11-11boards: siemens: iot2050: Ignore network errors during bootstage trackingJan Kiszka
We need to filter out NET_ETH_START errors because we have to enable networking in order to propagate the MAC addresses to the DT while there is no network driver for the prueth in U-Boot yet. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-11boards: siemens: iot2050: Re-enable bootstage reportingJan Kiszka
This got lost while fixing up the condition in board/siemens/iot2050/board.c Fixes: b55881dd ("bootstage: Add SPL support") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-11ARM: dts: am335x-chiliboard: add /chosen/tick-timerMarcin Niestroj
Commit 4b2be78ab66c ("time: Fix get_ticks being non-monotonic") has broken boot on chiliboard platform, as it requires '/chosen/tick-timer' in device-tree. This resulted in following panic message: Could not initialize timer (err -19) Provide missing chosen property in device-tree to fix chiliboard support. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2021-11-11get_maintainer.pl: add .get_maintainer.confMichael Walle
Since commit e57c7c5c4282 ("get_maintainer.pl: update from Linux kernel v5.13-rc6") only the top level MAINTAINERS file is used. This is because this commit (accidentally) disabled the search of MAINTAINERS files (find_maintainer_files is set to 0 again). Before that, commit b79372ae94fb ("scripts/get_maintainer.pl: enable find_maintainer_files") explicitly enabled that feature. Nowadays, we also have to set maintainer_path to a directory. To fix it and enable recursive search of MAINTAINERS, create a configuration file to set these two variables. Signed-off-by: Michael Walle <michael@walle.cc>
2021-11-11Azure: Move to windows-2019Tom Rini
As per https://github.com/actions/virtual-environments/issues/4312 the Windows-2016 environments are scheduled for deprecation and removal in early 2022. Move to windows-2019 now to avoid this (Visual Studio 2019 is included here, hence the tag naming scheme change). Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-11Remove LYNX KDI remaindersThomas Huth
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-11pxe: Allow calling the pxe_get logic directlySimon Glass
Refactor this code so that we can call the 'pxe get' command without going through the command-line interpreter. This makes it easier to get the information we need, without going through environment variables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11doc: Move distro boot doc to rSTSimon Glass
Move this over to the new rST format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Refactor sysboot to have one helperSimon Glass
The only difference between the three helpers is the filesystem type. Factor this out and call the filesystem functions directly, instead of through the command-line interpreter. This allows the file size to be obtained directly, instead of via an environment variable. We cannot do the same thing with PXE's tftpboot since there is no API at present to obtain information about the file that was read. So there is no point in changing pxe_getfile_func to use a ulong for the address, for example. This is as far as the refactoring can go for the present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Return the file size from the getfile() functionSimon Glass
It is pretty strange that the pxe code uses the 'filesize' environment variable find the size of a file it has just read. Partly this is because it uses the command-line interpreter to parse its request to load the file. As a first step towards unwinding this, return it directly from the getfile() function. This makes the code a bit longer, for now, but will be cleaned up in future patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11lib: Add a function to convert a string to a hex valueSimon Glass
Add an xtoa() function, similar to itoa() but for hex instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11lib: Add tests for simple_itoa()Simon Glass
Add test and a comment for this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11pxe: Drop get_bootfile_path()Simon Glass
This function no longer makes sense, since it is pretty easy to prepend the boot directory to the filename. Drop it and update its only caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Clean up the use of bootfileSimon Glass
The 'bootfile' environment variable is read in the bowels of pxe_util to provide a directory to which all loaded files are relative. This is not obvious from the API to PXE and it is strange to make the caller set an environment variable rather than pass this as a parameter. The code is also convoluted, which this feature implemented by get_bootfile_path(). Update the API to improve this. Unfortunately this means that pxe_setup_ctx() can fail, so add error checking. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move common parsing coding into pxe_utilSimon Glass
Both the syslinux and pxe commands use essentially the same code to parse and run extlinux.conf files. Move this into a common function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up code style a little in pxe_utilsSimon Glass
There are a few more blank lines than makes sense for readability. Also free() handles a NULL pointer so drop the pointless checks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up some comments in pxe_utilsSimon Glass
Some of these functions are a big vague in the comments. Tidy them up a bit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move pxe_utils filesSimon Glass
Move the header file into the main include/ directory so we can use it from the bootmethod code. Move the C file into boot/ since it relates to booting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up the is_pxe globalSimon Glass
Move this into the context to avoid a global variable. Also rename it since the current name does not explain what it actually affects. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Add a userdata field to the contextSimon Glass
Allow the caller to provide some info which is passed back to the readfile() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move do_getfile() into the contextSimon Glass
Rather than having a global variable, pass the function as part of the context. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Use a context pointerSimon Glass
At present the PXE functions pass around a pointer to command-table entry which is very strange. It is only needed in a few places and it is odd to pass around a data structure from another module in this way. For bootmethod we will need to provide some context information when reading files. Create a PXE context struct to hold the command-table-entry pointer and pass that around instead. We can then add more things to the context as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-05 17:41:42 +0000