summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-24cmd: mtd: expand <name> argument definition in command helpMarek Behún
The <name> argument can now also be MTD's DM device name or OF path. Mention this is command help. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: compare also with OF path and device name in get_mtd_device_nm()Marek Behún
The get_mtd_device_nm() function (code imported from Linux) simply iterates all registered MTD devices and compares the given name with all MTDs' names. With SPI_FLASH_MTD enabled U-Boot registers a SPI-NOR as a MTD device with name identical to the SPI flash chip name (from SPI ID table). Thus for a board with multiple same SPI-NORs it registers multiple MTDs, but all with the same name (such as "s25fl164k"). We do not want to change this behaviour, since such a change could break existing boot scripts, which can rely on a hardcoded name. In order to allow somehow to uniqely select a MTD device, change get_mtd_device_nm() function as such: - if first character of name is '/', try interpreting it as OF path - otherwise compare the name with MTDs name and MTDs device name. In the following example a board has two "s25fl164k" SPI-NORs. They both have name "s25fl164k", thus cannot be uniquely selected via this name. With this change, the user can select the second SPI-NOR either with "spi-nor@1" or "/soc/spi@10600/spi-nor@1". Example: => mtd list List of MTD devices: * s25fl164k - device: spi-nor@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/spi@10600/spi-nor@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000800000 : "s25fl164k" * s25fl164k - device: spi-nor@1 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/spi@10600/spi-nor@1 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000800000 : "s25fl164k" Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24cmd: mtd: print device OF path in listingMarek Behún
Print MTD's device OF path in the output of `mtd list` command. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: probe SPI NOR devices in mtd_probe_devices()Marek Behún
In order for `mtd list` U-Boot command to list SPI NOR devices without the need to run `sf probe` before, we have to probe SPI NOR devices in mtd_probe_devices(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: remove mtd_probe() functionMarek Behún
The device_probe() function does the same thing as mtd_probe() and mtd_probe() is only used in mtd_probe_uclass_mtd_devs(), where the probing can be made simpler by using uclass_foreach_dev_probe macro. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: spi-nor: fill-in mtd->dev memberMarek Behún
Fill in mtd->dev member with nor->dev. This can be used by MTD OF partition parser. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: spi-nor: allow registering multiple MTDs when DM is enabledMarek Behún
Currently when the SPI_FLASH_MTD config option is enabled, only one SPI can be registered as MTD at any time - it is the last one probed (since with old non-DM model only one SPI NOR could be probed at any time). When DM is enabled, allow for registering multiple SPI NORs as MTDs by utilizing the nor->mtd structure, which is filled in by spi_nor_scan anyway, instead of filling a separate struct mtd_info. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24mtd: add support for parsing partitions defined in OFMarek Behún
Add support for parsing partitions defined in device-trees via the `partitions` node with `fixed-partitions` compatible. The `mtdparts`/`mtdids` mechanism takes precedence. If some partitions are defined for a MTD device via this mechanism, the code won't register partitions for that MTD device from OF, even if they are defined. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com>
2021-06-24dm: core: add ofnode_get_path()Marek Behún
Add function for retrieving full node path of a given ofnode. This uses np->full_name if OF is live, otherwise a call to fdt_get_path() is made. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-06-24dm: core: add non-translating version of ofnode_get_addr_size_index()Marek Behún
Add functions ofnode_get_addr_size_index_notrans(), which is a non-translating version of ofnode_get_addr_size_index(). Some addresses are not meant to be translated, for example those of MTD fixed-partitions. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-06-24mtd: spinand: macronix: Add support for serial NAND flashJaime Liao
Macronix NAND Flash devices are available in different configurations and densities. MX"35" means SPI NAND MX35"UF" , UF meands 1.8V MX35LF"2G" , 2G means 2Gbits MX35LF2G"E4" , E4 means internal ECC and Quad I/O(x4) MX35UF4GE4AD/MX35UF2GE4AD/MX35UF1GE4AD are 1.8V 4G/2Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf Validated via normal(default) and QUAD mode by read, erase, read back, on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host(drivers/spi/spi-mxic.c). Signed-off-by: Jaime Liao <jaimeliao@mxic.com.tw> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-06-22mtd: spi-nor-ids: Add Macronix MX66UW2G345Gzhengxun
The MX66UW2G345G is Macronix Flash with SINGLE and OCTAL I/O. Hence, add SPI_NOR_OCTAL_READ flag for this flash. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: change order of id flags] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: zhengxun <zhengxunli.mxic@gmail.com>
2021-06-19Merge tag 'u-boot-rockchip-20210618' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip into next - New SoC platform support: rk3568; - rockchip pcie Code compile issue fix; - Board fix for rk3399 Khadas Edge; - Add Rockchip NFC driver;
2021-06-18Merge tag 'u-boot-stm32-20210618' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm into next - stm32mp157c-odyssey-som DT fixes - stm32_qspi: Fix short data write operation - dfu: set max_buf_size to erasesize also for NOR devices - Fixes ethernet clock property name for STM32MP1 board - STM32CubeProgrammer: various fixes - clk: cosmetic update for clk-uclass
2021-06-18clk: cosmetic change in uclassPatrick Delaunay
Remove the tab in clk_get_bulk to respect the coding rules. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: handle dfu errorPatrick Delaunay
Handle DFU stack error in STM32CubeProgrammer protocol. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18dfu: add error callbackPatrick Delaunay
Add error callback in dfu stack to manage some board specific behavior on DFU targets. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: change one message level to debugPatrick Delaunay
Move the message "Invalid or missing layout file." to debug level as it is a normal behavior and not an error and add the missing '\n'. This patch avoids the strange trace : Boot over usb0! Invalid or missing layout file.DFU alt info setting: done Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: use get_cpu_dev for GetID commandPatrick Delaunay
Use get_cpu_dev() in uart getID command and remove the defines DEVICE_ID_BYTE1 and 2 defines. This patch prepare the support for new SOC family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: correctly handle DM_PMICPatrick Delaunay
Correctly handle number of alternate when DM_PMIC is not activated. This patch remove the last UNKNOWN partition in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-18stm32mp: stm32prog: handle the next phase after USB re-enumerationPatrick Delaunay
Handle the second USB enumeration only when the flashlayout is received and when phase is PHASE_FLASHLAYOUT. This patch removes the call of stm32prog_next_phase as it is already done in stm32prog_dfu_init(). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: solve compilation with CONFIG_FIT_SIGNATUREPatrick Delaunay
When CONFIG_FIT_SIGNATURE is activated, CONFIG_LEGACY_IMAGE_FORMAT is deactivated and the define IMAGE_FORMAT_LEGACY don't exist with include/image.h: #if defined(CONFIG_LEGACY_IMAGE_FORMAT) #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #endif This patch adds the needed check on compilation flag CONFIG_LEGACY_IMAGE_FORMAT to avoid the compilation error for command stm32prog: cmd_stm32prog.c:81:8: error: ‘IMAGE_FORMAT_LEGACY’ undeclared (first use in this function); did you mean ‘IMAGE_FORMAT_FIT’? 81 | if (IMAGE_FORMAT_LEGACY == | ^~~~~~~~~~~~~~~~~~~ | IMAGE_FORMAT_FIT Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: add support of initrd in flashlayoutPatrick Delaunay
Add the support in command stm32prog of kernel load and start with initrd file, identify by the partition Type "Binary" in the flashlayout.tsv, for example: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 board.dtb P 0x12 initrd Binary ram0 0xC4400000 <initrd> The <initrd> file can be a legacy image "uInitrd", generated with mkimage, or a RAW initrd image "initrd.gz". After a DFU detach the bootm command with be executed with the associated address, for example: $> bootm 0xC2000000 0xC4400000:<size> 0xC4000000 When the "Binary" partition type is absent, the 'bootm' command starts the kernel without ramdisk, for example: $> bootm 0xC2000000 - 0xC4000000 With this paths, it is no more mandatory to generate FIT including the kernel, DT and initrd: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 fit System ram0 0xC2000000 fit.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: add timeout in stm32prog_serial_get_bufferPatrick Delaunay
Handle timeout in stm32prog_serial_get_buffer to sent NACK to STM32CubeProgrammer when the buffer is not fully received. This patch avoids to reach the STM32CubeProgrammer timeout and the associated unrecoverable error. Timeout error occurred while waiting for acknowledgment. Error: Write Operation fails at packet number 4165 at address 0x1044FF Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: remove all the header check for UART downloadPatrick Delaunay
This patch removes the header check for UART download; the check of checksum is not mandatory with even parity and chuck checksum for each 256 received bytes and it is only done for STM32 image (FSBL = TF-A BL2), not for FIT image. This patch solve issue of duplicated 0x100 byte written with FIP header. Fixes: 4fb7b3e10891 ("stm32mp: stm32prog: add FIP header support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18board: stm32mp1: correct the property name for ethPatrick Delaunay
Use the correct name for STMicroelectronics phys config properties, replace '_' by '-': "st,eth_clk_sel" => "st,eth-clk-sel" "st,eth-ref-clk-sel" => st,eth-clk-sel" These property name are aligned with the upstreamed Linux kernel binding: linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml See Linux kernel commit "dt-bindings: net: stmmac: add phys config properties" merged in v5.1-rc1. This patch allow to reuse the kernel device tree directly in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devicesPatrick Delaunay
For NOR devices the logical DFU buffer size is the sector_size, as it is done in dfu_sf.c or in spi/sf_mtd.c (sf_mtd_info.erasesize = flash->sector_size) For NAND the DFU size was already limited to erasesize as has_pages = true. So the mtd dfu backend can use this erasesize for all the MTD devices, NOR and NAND with dfu->max_buf_size = mtd->erasesize This difference was initially copied from MTD command, where data is fully available in RAM without size limitation. This patch avoids to have many sector write in dfu_mtd.c at the end of the DFU transfer and avoids issues with USB timeout or WATCHDOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18spi: stm32_qspi: Fix short data write operationDaniil Stas
TCF flag only means that all data was sent to FIFO. To check if the data was sent out of FIFO we should also wait for the BUSY flag to be cleared. Otherwise there is a race condition which can lead to inability to write short (one byte long) data. Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-06-18mtd: nand: NFC drivers for RK3308, RK2928 and othersYifeng Zhao
This driver supports Rockchip NFC (NAND Flash Controller) found on RK3308, RK2928, RKPX30, RV1108 and other SOCs. The driver has been tested using 8-bit NAND interface on the ARM based RK3308 platform. Support Rockchip SoCs and NFC versions: - PX30 and RK3326(NFCv900). ECC: 16/40/60/70 bits/1KB. CLOCK: ahb and nfc. - RK3308 and RV1108(NFCv800). ECC: 16 bits/1KB. CLOCK: ahb and nfc. - RK3036 and RK3128(NFCv622). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb and nfc. - RK3066, RK3188 and RK2928(NFCv600). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb. Supported features: - Read full page data by DMA. - Support HW ECC(one step is 1KB). - Support 2 - 32K page size. - Support 8 CS(depend on SoCs) Limitations: - No support for the ecc step size is 512. - Untested on some SoCs. - No support for subpages. - No support for the builtin randomizer. - The original bad block mask is not supported. It is recommended to use the BBT(bad block table). Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18configs: rockchip: rk3399: Khadas Edge add USB OHCIArtem Lapkin
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18ARM64: rockchip: evb_rk3399: add usb ohci definationsArtem Lapkin
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Replace msleep occurences by udelayAnand Moon
Replace msleep occurences by udelay. drivers/pci/pcie_dw_rockchip.c:254:3: warning: implicit declaration of function 'msleep' [-Wimplicit-function-declaration] Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Drop the unused variable warningAnand Moon
Drop the unused variable warning below. drivers/pci/pcie_dw_rockchip.c:161:6: warning: unused variable 'val' [-Wunused-variable] 161 | u32 val; | ^~~ Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Fixed the below compilation errorAnand Moon
Use the generic error number instead of specific error number. Changes fix the below error. drivers/pci/pcie_dw_rockchip.c: In function 'rk_pcie_read': drivers/pci/pcie_dw_rockchip.c:70:10: error: 'PCIBIOS_UNSUPPORTED' undeclared (first use in this function) 70 | return PCIBIOS_UNSUPPORTED; | ^~~~~~~~~~~~~~~~~~~ drivers/pci/pcie_dw_rockchip.c: In function 'rk_pcie_write': drivers/pci/pcie_dw_rockchip.c:90:10: error: 'PCIBIOS_UNSUPPORTED' undeclared (first use in this function) 90 | return PCIBIOS_UNSUPPORTED; | ^~~~~~~~~~~~~~~~~~~ Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: Add rk3568 architecture coreJoseph Chen
RK3568 is a high-performance and low power quad-core application processor designed for personal mobile internet device and AIoT equipments. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: Add sdram driverJoseph Chen
Add the driver for rk3568 u-boot to get sdram capacity. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: rockchip: Add dts for rk3568 evbJoseph Chen
Add dts for rk3568 evb, sync from the linux kernel upstream list [0]. [0] https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: Sync rockchip-pinconf.dtsi from kernelJoseph Chen
Sync from linux kernel: https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rk3399_common: setup fdtoverlay_addr_r valueArtem Lapkin
fdtoverlay (pxe_utils) require define fdtoverlay_addr_r env variable for example sunxi-common.h meson64.h already have it. Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: add clock driverElaine Zhang
Add rk3568 clock driver and cru structure definition. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: add device tree fileElaine Zhang
Add dts binding header for rk3568, files origin from kernel. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable SDMMC2 in SPLGrzegorz Szymaszek
Enable the SDMMC2 device tree node, as well as the pins it uses, in U-Boot SPL. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR modeGrzegorz Szymaszek
Enable the SDMMC2 eMMC high-speed DDR mode as it is done in the corresponding Linux kernel device tree. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supplyGrzegorz Szymaszek
Set the SDMMC2 VQMMC supply to vdd (buck3). Note that in the corresponding Linux kernel device tree, the supply is set to v3v3 (buck4), which is wrong. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanesGrzegorz Szymaszek
Add the “sdmmc2_d47_pins_d” pins to the SDMMC2 pinctrls. Increase the bus width from four to eight. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: fix the basic SDMMC2 propertiesGrzegorz Szymaszek
The SDMMC2 interface hosts an eMMC. Replace the interface properties that would only apply to SD cards—“broken-cd” and “disable-wp”—with relevant ones: “non-removable”, “no-sd” and “no-sdio”. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-17Merge tag 'u-boot-atmel-2021.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for the 2021.10 cycle: This feature set converts the boards pm9261 and pm9263 Ethernet support to DM; enables hash command for all SAM boards; fixes the NAND pmecc bit-flips correction; adds Falcon boot for sama5d3_xplained board; and other minor adjustments.
2021-06-17Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-riscv ↵Tom Rini
into next - K210 updates
2021-06-17test: Add K210 PLL tests to sandbox defconfigsSean Anderson
This adds the unit test for the K210 PLL to the sandbox defconfigs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 09:21:14 +0000