summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-10Merge tag 'u-boot-rockchip-20231110' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Board: rk3588 Pine64 QuartzPro64; - Fix rk3066 enter download mode; - Fix for ringneck-px30 board;
2023-11-10rockchip: include: asm: fix entering download mode rk3066Johan Jonker
Keep track of the re-entries with help of the lr register. This binary can be re-used and called from various BROM functions. Only when it's called from the part that handles SPI, NAND or EMMC hardware it needs to early return to BROM ones. In download mode when it handles data on USB OTG and UART0 this section must be skipped. Unlike newer Rockchip SoC models the rk3066 BROM code does not have built-in support to enter download mode on return to BROM. This binary must check the boot mode register for the BOOT_BROM_DOWNLOAD flag and reset if it's set. It then returns to BROM to the end of the function that reads boot blocks. From there the BROM code goes into a download mode and waits for data on USB OTG and UART0. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-10rockchip: ringneck-px30: enable SPL_BOARD_INITQuentin Schulz
Now that Ringneck requires some board-specific code (namely resetting the MCU companion controller) to be run during SPL stage, let's enable SPL_BOARD_INIT. Cc: Quentin Schulz <foss+uboot@0leil.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-10rockchip: ringneck-px30: always reset STM32 companion controller on bootQuentin Schulz
It's happened that glitches on the STM32_RST and STM32_BOOT lines have put the STM32 companion microcontroller into DFU mode making it not boot its FW, rendering it useless for the user. Considering that the STM32 companion microcontroller is always reset on a reboot or power cycle, resetting it once again in U-Boot SPL isn't going to hurt it any more. For ATtiny companion microcontroller, the situation is a bit different because a reboot or power cycle doesn't reset it. Additionally, since it can only be reset with a UPDI reset on the STM32_RST line, and that is virtually impossible to mistakenly trigger, the ATtiny is unlikely to be in unwanted reset or enter reset because U-Boot toggles STM32_RST line. Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-10rockchip: rv1126: Read cpuid from otp and set ethaddrTim Lunn
Provide configuration to read cpuid and generate a persistent MAC address in ethaddr Signed-off-by: Tim Lunn <tim@feathertop.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-10rockchip: otp: Add support for RV1126Tim Lunn
Extend the otp driver to read rv1126 otp. This driver code was adapted from the Rockchip BSP stack. Signed-off-by: Tim Lunn <tim@feathertop.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-10rockchip: dts: fix bootph tags for rv1126Tim Lunn
RV1126 fails to boot on 2024.01-rc1. Commit 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation") changed the behaviour of bootph-pre-ram, to limit nodes to spl phase. This caused rv1126 boards to fail to boot with the current dts. This patch updates the pmu/grf nodes to bootph-all tags as they are needed in all phases. This fixes the boot issue on rv1126 boards. Signed-off-by: Tim Lunn <tim@feathertop.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-09rockchip: ringneck-px30: enable i2c commandQuentin Schulz
This is a useful tool to check the presence of a device on a specific i2c bus, so let's enable it. Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-11-09board: rockchip: add Pine64 QuartzPro64 RK3588 boardTom Fitzhenry
QuartzPro64 is a Rockchip RK3588 based SBC by Pine64. UART and boot over SD/eMMC/RJ45 are tested to work. Linux commits from next-20231013: 8152d3d070a9 ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree") Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Cc: Eugen Hristev <eugen.hristev@collabora.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Ondrej Jirman <megi@xff.cz>
2023-11-07Merge tag 'xilinx-for-v2024.01-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2024.01-rc3 xilinx: - Disable lock in mini spi configurations zynq: - DTS syncups - Kconfig updates zynqmp: - DTS syncups - Kconfig fixups versal: - Make 30MHz as default freq for spi versal net: - Enable ADMA for mmc serial: - Read baudrate from DT spi: - Put spi lock under one Kconfig - Support 64bit addresses in cadance_ospi - zynqmp_gqspi - change logging support firmware: - Handle errors in zynqmp_pm_feature() include: - Sync vsc8531 dt binding with kernel
2023-11-07MAINTAINERS: fastboot: add MattijsMattijs Korpershoek
Fastboot has been marked as orphaned since 2021. Since I'm interested in maintaining this, assign myself. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2023-11-07MAINTAINERS: usb gadget: add MattijsMattijs Korpershoek
It seems that Lukasz and Marek could get some help in maintaining the usb gadget drivers. Assign myself as maintainer. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de>
2023-11-07dt-bindings: Remove VSC8531 specific RGMII delay definitionsMichal Simek
Based on Linux upstream discussion value enumeration shouldn't be used. Instead of it delay in pS should be used that's why remove it from the header. Link: https://lore.kernel.org/all/YNsm%2F0dmpBgO8mqr@lunn.ch/ Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/bbd343474856a67252f3b31d22b3b5a80ad04043.1698851109.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Add description for nvmem efuse layoutMichal Simek
Based on discussion with DT folks at link below there is not going to be any name restrictions for child names. That's why add description for current nvmem layout. Link: https://lore.kernel.org/lkml/20231013101450.573-3-praveen.teja.kundanala@amd.com/ Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/af81299cafc2bd13ed30dcd69bdf6efb5fbb7f68.1698840373.git.michal.simek@amd.com
2023-11-07ARM: zynq: Add partition descriptionMichal Simek
Xilinx is using standard mtd partition layout for quite a long time. It is used for testing purpose on evaluation boards. Also #address/size-cells shouldn't be present without nodes which should use them that's why move them from zynq-7000.dtsi to nand/nor nodes directly. The patch was tested on zc706 and zedboard(with also increasing max frequency and rx bus width). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4c3348981bba32d3892194420d78fe8621c47534.1698837725.git.michal.simek@amd.com
2023-11-07xilinx: Enable SPI_FLASH_MTD by defaultMichal Simek
Provide access to qspi flash layout via mtd command. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b3c4a3eddb71aab9535b034380d0dbae770828d4.1698837725.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Comment all smmu entriesMichal Simek
SMMU is disabled by default and not all masters can be enabled at the same time because of limited number of entries. That's why comment all iommu properties but keep them for reference in DT. In XEN case they should be added back and Xen should have SMMU enabled by default. Also add IDs for DP and DPDMA. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e868c27c52ded5d8ef25f75ba394b1ab3b31b80a.1698825657.git.michal.simek@amd.com
2023-11-07arm64: versal-net: Add DTSes for mini qspi/ospi configurationMichal Simek
Mini U-Boot is running out of OCM and it's only purpose is to program non volatile memories. There are different configurations which ospi/qspi can be that's why describe them via DT. DT binding is already approved that's why there is no reason not to add it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a99a8d72201a782fc811715942dea97fb5ab583b.1698329087.git.michal.simek@amd.com
2023-11-07arm64: versal: Add DTSes for mini qspi/ospi configurationMichal Simek
Mini U-Boot is running out of OCM and it's only purpose is to program non volatile memories. There are different configurations which ospi/qspi can be that's why describe them via DT. DT binding is already approved that's why there is no reason not to add it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9518ab1c4299a45e800b8611172edd78c9243132.1698329087.git.michal.simek@amd.com
2023-11-07ARM: zynq: Add DTSes for mini qspi configurationsMichal Simek
Mini U-Boot is running out of OCM and it's only purpose is to program non volatile memories. There are different configurations which qspi can be that's why describe them via DT. DT binding is already approved that's why there is no reason not to add it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e7d31a9d9c4a76e171eefc619f31fabd0831a614.1698329087.git.michal.simek@amd.com
2023-11-07ARM: zynq: Add DTSes for mini qspi configurationsMichal Simek
Mini U-Boot is running out of OCM and it's only purpose is to program non volatile memories. There are different configurations which qspi can be that's why describe them via DT. DT binding is already approved that's why there is no reason not to add it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/28b3cdd7e91b2b4c3c36d0bf65aa5bac042f248c.1698329087.git.michal.simek@amd.com
2023-11-07xilinx: versal: Setup 30MHz as default spi frequencyMichal Simek
Align default SPI configuration with ZynqMP/Versal NET. There is no reason to run on lower frequencies. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c1d6ebd659f3002649b1200c926f8b9ed3132085.1698749448.git.michal.simek@amd.com
2023-11-07arm64: versal-net: enable CONFIG_MMC_SDHCI_ADMAVenkatesh Yadav Abbarapu
The Standard Host Controller Interface (SDHCI) specification version 3.00 adds support for Advanced DMA (ADMA) for both 64 and 32 bit widths of DMA. This significantly improves read and write throughput. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231027030446.4009-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07arm64: zynqmp: Fix Kconfig entry indentationMichal Simek
Use tabs instead of space for entry indentation which is standard coding style. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ff28e719de82258c066f1fedae87f88597f367b5.1698302068.git.michal.simek@amd.com
2023-11-07arm: xilinx: Add missing dual parallel flash descriptionMichal Simek
Describe flash memories based on the latest DT binding. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/cddf2909d0445eba08b998d42ffc31c1fa3132b9.1698045694.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Disable Tri-state for MIO38 PinTejas Bhumkar
gpio38 is used in SOM's kv260 to reset the Ethernet PHY. At present, HW reset is not working properly as Tri-state  is enabled for MIO38, causing inappropriate PHY register reads. Disabled Tri-state for MIO38 to make HW reset work. Tri-state disable : ZynqMP> md 0xFF180208 2 ff180208: 00bfe7a3 00000540 Tri-state enable : ZynqMP> md 0xFF180208 2 ff180208: 00bfe7e3 00000540 Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com> Link: https://lore.kernel.org/r/20231020050622.972750-1-tejas.arvind.bhumkar@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07zynqmp: migrate gqspi debug to loggingIbai Erkiaga
The following patch migrates the usage of debug and printf functions to the relevant logging function as per U-Boot DM guidelines. Additionally some of the debugging statements have been rearanged for a more meaningfull debug experience. aarch64-linux-gnu-size reports 229 bytes less when debug is enabled at file level, while is just 5bytes more when disabled. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com> Link: https://lore.kernel.org/r/20231013123739.2757979-1-ibai.erkiaga-elorza@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07arm64: dts: zynqmp: make hw-ecc as the default ecc modeAmit Kumar Mahapatra
Except for Linux no other component (i.e., u-boot, fsbl or BootRom) of the software stack supports software ecc engine. So, make hw-ecc as the default ecc mode. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f47b95616eb40d3a9908ca60df94ec6e873b071c.1697119098.git.michal.simek@amd.com
2023-11-07ARM: zynq: Disable the config CONFIG_SPI_FLASH_USE_4K_SECTORSVenkatesh Yadav Abbarapu
Lock size for the flashes will be in terms of sector size, so disable the CONFIG_SPI_FLASH_USE_4K_SECTORS and read it from the flash itself. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8e5c2bf3b7e5f366c4e261e8055ea254bda53aa9.1697117993.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Disable the lock option for mini qspiVenkatesh Yadav Abbarapu
As mini configs are required only for flashing the images, so disabling the lock config which will save nearly 6KB of memory. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/374d6b3a46d19b7ee171dfe8071676098db93e25.1697117869.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: remove snps, xhci-stream-quirk property for usbPiyush Mehta
To sync up with the upstream bulk-stream feature, removed 'snps,xhci-stream-quirk' DT property for usb. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1f4ecfe3ea6a4d0d8d8de324f5dffd3efc86656a.1697115523.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Remove address/size-cells from ams nodeMichal Simek
Remove unused address/size-cells which is also done upstream that's why this is pretty much sync patch with upstream. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0ca8d8fe245ad7cb665f5333202d83f70acfc11f.1697115523.git.michal.simek@amd.com
2023-11-07Revert "arm64: zynqmp: Add power domain description for PL"Michal Simek
This reverts commit d59fac2f3f247470708a1aed1af96802a05e0e61. This power domain shouldn't be enabled by default. Power domain behavior should be handled on case by case basis. Adding this property to zynqmp.dtsi is breaking some suspend/resume cases that's why remove it from this file. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7ed2a46383c6918fbbaca2d618459b1ee58f865c.1697115523.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Remove xlnx,zynqmp-aes nodeMichal Simek
AES can be discovered via firmware interface that's why remove node for it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/eaf575a6ca92f8c10cefb447c08c1292025deb74.1697115523.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Use mdio node by vp-x-a2785-00-revA and vpk120-revAMichal Simek
All boards have been converted to use mdio node that's why move ethernet phys under mdio node too. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/6c60f5d29b9d9992bd0130fd263c8ed13cb8166c.1697115523.git.michal.simek@amd.com
2023-11-07arm64: zynqmp: Remove fclk driverMichal Simek
fclk will never go upstream that's why removing this node from DT. All PL (programmable logic) based IPs should handle clocks self without using this workaround. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fbb8665b8a58dbe96349abfe5492a509939e165b.1697098930.git.michal.simek@amd.com
2023-11-07spi: cadence_ospi_versal: Add support for 64-bit addressVenkatesh Yadav Abbarapu
When 64-bit address is passed only lower 32-bit address is getting updated. Program the upper 32-bit address in the DMA destination memory address MSBs register. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231011031515.4151-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07drivers: firmware: Handle error case in the zynqmp_pm_featureVenkatesh Yadav Abbarapu
Unhandled error coming from xilinx_pm_request() but return value is not read back that's why getting sparse warning as below: warning: variable 'ret' set but not used [-Wunused-but-set-variable]. In case of error return the "ret" value. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231011025647.17200-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07arm64: versal_net: Disable the lock option for mini ospi and qspiVenkatesh Yadav Abbarapu
As mini configs are required only for flashing the images, so disabling the lock config which will save nearly 6KB of memory. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231003031715.5343-4-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07arm64: versal: Disable the lock option for mini ospi and qspiVenkatesh Yadav Abbarapu
As mini configs are required only for flashing the images, so disabling the lock config which will save nearly 6KB of memory. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231003031715.5343-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07mtd: spi-nor: Add spi flash lock config optionVenkatesh Yadav Abbarapu
Provide an explicit configuration option to disable default "lock" of any flash chip which supports locking. By disabling the lock config will save some amount of memory and also don't expose the lock functionality to the users i.e., via sf protect command. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20231003031715.5343-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07serial: zynqmp: Fetch baudrate from dtb and updateAlgapally Santosh Sagar
The baudrate configured in .config is taken by default by serial. If change of baudrate is required then the .config needs to changed and u-boot recompilation is required or the u-boot environment needs to be updated. To avoid this, support is added to fetch the baudrate directly from the device tree file and update. The serial, prints the log with the configured baudrate in the dtb. The commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") is taken as reference for changing the default environment variable. The default environment stores the default baudrate value, When default baudrate and dtb baudrate are not same glitches are seen on the serial. So, the environment also needs to be updated with the dtb baudrate to avoid the glitches on the serial. Also add test to cover this new function. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230921112043.3144726-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-07configs: Add support in Kconfig and convert for armada boardsAlgapally Santosh Sagar
Move the DEFAULT_ENV_IS_RW to Kconfig for easier configuration. Hence, add the CONFIG_DEFAULT_ENV_IS_RW config to the defconfig files to allow enabling them for armada boards. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20230921112043.3144726-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-11-06Prepare v2024.01-rc2v2024.01-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-06Merge branch '2023-11-06-assorted-changes'Tom Rini
- One new MIPS platform and a mailmap update
2023-11-06.mailmap: map Pali RohárHeinrich Schuchardt
Pali expressed that he does not want to receive mails relating to his past contributions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-11-06bmips: Add Inteno XG6846 boardLinus Walleij
This adds support for the Inteno XG6846 board based on the Broadcom MIPS 6328 SoC. The default boot will read a uImage from flash and boot it. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-06Merge tag 'u-boot-amlogic-20231106' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - fixup to also enabled DFU RAM boot for libretech-ac - sm fix to bind child sm devices in the device tree - add missing A1 clocks for USB stack
2023-11-06Merge branch '2023-11-06-networking-updates'Tom Rini
- A few dhcp related improvements, be clearer to the user when we don't have a MAC address, assorted driver/phy improvements and new drivers.
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-04 19:44:34 +0000