summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-03rockchip: Provided SPL control over efuse presenceSimon Glass
This driver should not generally be present in SPL, even if misc devices are enabled. Update the Makefile rule accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03rockchip: mmc: Fix a missing colon and newlineSimon Glass
Add a missing colon and newline in rk3399_emmc_get_phy(). Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03mmc: rockchip: Allow clocks to be missingSimon Glass
Allow MMC init when clock support is not enabled in a particular phase. Refactor the setting of priv->emmc_clk so it is a bit clearer. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03mmc: rockchip: Log some error returnsSimon Glass
Add a little logging to some places in this driver, to aid debugging when something goes wrong. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03mmc: Log the error when init failsSimon Glass
Add an error-return log to the call in mmc_init_device() Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03mmc: Add more debugging for SPLSimon Glass
When MMC booting fails it is sometimes hard to figure out what went wrong as there is no error code. It isn't even clear which MMC device was chosen, since SPL can have its own numbering. Add some debugging to help with this. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03mmc: Support driver model in TPLSimon Glass
Some boards want to use DM_MMC in TPL so add an option for that. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03arm: Fix up a stale comment in sections.cSimon Glass
There are currently four symbols here, so drop the word 'two'. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-10-03arm: cache: Drop a stale commentSimon Glass
This header includes more than just dummy functions, so drop this comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03armv8: Support not having separate BSSSimon Glass
Separate BSS is current mandatory on armv8 but this is not useful for early boot phases. Add support for the combined BSS. Use an #ifdef to avoid using CONFIG_SPL_BSS_START_ADDR which is not valid in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-10-03serial: Support debug UART in TPLSimon Glass
Some boards want to use the debug UART in TPL so add an option for that. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03ram: Support driver model in VPLSimon Glass
Some boards want to use RAM in VPL so add an option for that. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03tpl: Support numbered aliases in device treeSimon Glass
Add an option so that this feature can be enabled in TPL for boards which need it. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03tiny-printf: Correct return valuesSimon Glass
The sprintf() etc. functions are supposed to return the length of the string written, but do not. Fix this by checking the amount of buffer space used. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03fdtdec: Support separate BSS for all XPL buildsSimon Glass
Adjust the condition so that separate BSS can be deselected for TPL and VPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03gzip: Correct function comment for gunzip()Simon Glass
This doesn't describe the length parameter correctly. Fix it and zunzip() too. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03bootstd: Add stub for bootdev_setup_for_sibling_blk()Simon Glass
When bootstd is not enabled, bootdevs should not be set up. Add a static inline function to see to this. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03sandbox: Add missing header fileSimon Glass
This file uses __aligned so should include the header which defines that. Signed-off-by: Simon Glass <sjg@chromium.org>
2024-10-03boot: android: Fix ramdisk loading for v2 headerMattijs Korpershoek
Before commit da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+"), the ramdisk was loaded from img_data.ramdisk_ptr, ignoring offset provided via mkbootimg. commit da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+") rightfully fixes this by switching to use img_data.ramdisk_addr instead. However, it does not copy the ramdisk content to img_data.ramdisk_addr in case we use boot image v2. Because of this, we can no longer boot Android on Khadas vim3 board: [ 3.940361] RAMDISK: Couldn't find valid RAM disk image starting at 0. Add the missing memcpy() to fix the issue. Fixes: da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-10-03Merge patch series "arm: Initial support for Analog Devices SC5xx boards"Tom Rini
Oliver Gaskell <Oliver.Gaskell@analog.com> says: ADSP-SC5xx is a series of ARM-based DSPs. This comprises the armv7 based SC57x, SC58x and SC594 series, and the armv8 based SC598. This patch series includes configurations, init code, and minimal DTs to enable Analog Devices' evaluation boards for these SoCs to boot through SPL and into U-Boot Proper, as well as devicetree schemas for the added DTs. This patch series depends on ("arm: Add Analog Devices SC5xx Machine Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
2024-10-03arm: SC573-EZKIT initial supportOliver Gaskell
Adds support for Analog Devices' SC573-EZKIT board. Includes: - SoC specific configs in mach-sc5xx/Kconfig - Memory Map for SPL - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC589-MINI initial supportOliver Gaskell
Adds support for Analog Devices' SC589-MINI board. Includes: - Board specific configs in mach-sc5xx/Kconfig - Board-specific Kconfig and environment in board/adi/ Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC589-EZKIT initial supportOliver Gaskell
Adds support for Analog Devices' SC589-EZKIT board. Includes: - Board specific configs in mach-sc5xx/Kconfig - Board-specific Kconfig and environment in board/adi/ - Memory configuration Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC584-EZKIT initial supportOliver Gaskell
Adds support for Analog Devices' SC584-EZKIT board. Includes: - SoC specific configs in mach-sc5xx/Kconfig - Memory Map for SPL - SPL config options in common/spl/Kconfig - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC594-SOM-EZLITE initial supportOliver Gaskell
Adds support for Analog Devices' SC594-SOM-EZLITE board. Includes: - Board specific configs in mach-sc5xx/Kconfig - Board-specific Kconfig and environment in board/adi/ Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC594-SOM-EZKIT initial supportOliver Gaskell
Adds support for Analog Devices' SC594-SOM-EZKIT board. Includes: - SoC specific configs in mach-sc5xx/Kconfig - Memory Map for SPL - SPL config options in common/spl/Kconfig - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC598-SOM-EZLITE initial supportOliver Gaskell
Adds support for Analog Devices' SC598-SOM-EZLITE board. Includes: - Board specific configs in mach-sc5xx/Kconfig - Board-specific Kconfig and environment in board/adi/ Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: SC598-SOM-EZKIT initial supportOliver Gaskell
Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes: - CONFIG options common to all SC5xx SoCs - SoC specific configs in mach-sc5xx/Kconfig - SPL config options in common/spl/Kconfig - Memory Map for SPL - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: mach-sc5xx: clean up KconfigOliver Gaskell
Moves common options between all SC5xx series boards to the ARCH_SC5XX option instead of duplicating them. Also, it was possible to select multiple of the SoC support options. Given a U-Boot binary can only support a single platform, this moves the SoC selection to a `choice`, making them mutually exclusive. Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03dt-bindings: timer: Add SC5xx Timer bindingsOliver Gaskell
Add devicetree schema for the timer peripheral on Analog Devices SC5xx series SoCs. Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03dt-bindings: clock: Add SC5xx clock tree bindingsOliver Gaskell
Add devicetree schema for the clock tree on Analog Devices SC5xx series SoCs. Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03dt-bindings: arm: Add SC5xx Series bindingOliver Gaskell
Add devicetree schema for Analog Devices SC5xx series SoCs. Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC598-SOM-EZLITEOliver Gaskell
Add minimal device tree for Analog Devices' SC598-SOM-EZLITE board. This patch depends on Patches 01 and 07, for sc5xx.dtsi and sc598-som.dtsi respectively. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC598-SOM-EZKITOliver Gaskell
Add minimal device tree for Analog Devices' SC598-SOM-EZKIT board, and the SC598 SoM. This patch depends on patch 01, for sc5xx.dtsi. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC594-SOM-EZLITEOliver Gaskell
Add minimal device tree for Analog Devices' SC594-SOM-EZLITE board. This patch depends on Patches 01 and 05, for sc5xx.dtsi and sc594-som.dtsi respectively. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC594-SOM-EZKITOliver Gaskell
Add minimal device tree for Analog Devices' SC594-SOM-EZKIT board, and the SC594 SoM. This patch depends on patch 01, for sc5xx.dtsi. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC589-EZKITOliver Gaskell
Add minimal device tree for Analog Devices' SC589-EZKIT board. This patch depends on Patches 01 and 02, for sc5xx.dtsi and sc58x.dtsi. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC589-MINIOliver Gaskell
Add minimal device tree for Analog Devices' SC589-MINI board. This patch depends on Patches 01 and 02, for sc5xx.dtsi and sc58x.dtsi. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC584-EZKITOliver Gaskell
Add minimal device tree for Analog Devices' SC584-EZKIT board, and common files for the SC58x family. This patch depends on Patch 01, for sc5xx.dtsi. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03arm: dts: Support SC573-EZKITOliver Gaskell
Adds minimal device tree for Analog Devices' SC573-EZKIT board and common files for the SC57x/SC5xx family. This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and adds the ADSP Linux mailing list as the list for ARM SC5XX. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
2024-10-03Update the ARM trusted firmware git URLPeter Robinson
The primary upstream URL for tf-a has moved, in some cases things like tags are not always pushed to the old URL so update the URLs to the primary upstream project URL. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2024-10-03cmd: simplify CONFIG_CMD_USB_MASS_STORAGE dependenciesHeinrich Schuchardt
CONFIG_USB_GADGET_DOWNLOAD depends on CONFIG_USB_GADGET. It is sufficient to depend on the prior. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20240921092050.9260-1-heinrich.schuchardt@canonical.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-10-02rtc: rv3028: add support to manage VDD regulatorArturo Buzarra
This commit adds support to manage an external regulator to enable the main power supply VDD. Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
2024-10-02Makefile: pass external DTB provided by make variable EXT_DTB to binmanAlexander Kochetkov
Yocto build is using EXT_DTB to repack U-Boot during signed FIT kernel creation. First, it takes the DTB from U-Boot, then it creates signed FIT kernel image and places kernel key into the DTB. After that it executes: make EXT_DTB=/path/to/dtb/with/kernel/key Despite the fact that in the documentation all examples with EXT_DTB use only single DTB, the patch allows pass many DTB files separated by spaces, e.g.: make EXT_DTB="/path1/to/1.dtb /path2/to/2.dtb" The first DTB from the list become default configuration. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2024-10-02spi: davinci: Drop the preload of TX buffer before read/writes operationsBastien Curutchet
A write to the TX buffer is performed before entering the loop to "avoid clock starvation". This sometimes results in subsequent writes in davinci_spi_xfer_data() to occur while the TXFULL bit is asserted, leading to write failures. Remove the preload of the TX buffer. Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
2024-10-02Add mkimage secp521r1 ECDSA curve supportJoakim Tjernlund
Adds support for the secp521r1 ECDSA algorithm to mkimage. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2024-10-02fs: Fix SPL build if SPL_FS_LOADER is enabled and FS_LOADER is disabledHiago De Franco
When SPL_FS_LOADER is set to y and FS_LOADER is not enabled, the SPL build fails with the following errors: AR spl/boot/built-in.o LD spl/u-boot-spl arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function `fw_get_filesystem_firmware': /u-boot/drivers/misc/fs_loader.c:162: undefined reference to `fs_set_blk_dev' arm-none-linux-gnueabihf-ld.bfd: /home/frh/tdx/src/u-boot/drivers/misc/ fs_loader.c:185: undefined reference to `fs_read' arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function `select_fs_dev': /u-boot/drivers/misc/fs_loader.c:89: undefined reference to `fs_set_blk_dev_with_part' make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 make: *** [Makefile:2055: spl/u-boot-spl] Error 2 Fix it by replacing the FS_LOADER with SPL_FS_LOADER in the Makefile, so the fs.c with the necessary function definitions are compiled. Fixes: b071a07743d4 ("drivers: misc: Makefile: Enable fs_loader compilation at SPL Level") Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-10-02board: ti: j722s: Update Resource Management configsVaishnav Achath
Update J722S Resource Management configs to the latest output generated by K3 Resource Partitioning tool. Main change includes allocating more BCDMA channels to A53 for CSI2RX to support 4 x CSIRX capture instance simultaneously. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
2024-10-02Merge patch series "Add Android 14 bootflow support for AM62X and AM62P board"Tom Rini
Guillaume La Roque <glaroque@baylibre.com> says: Ths patchset add support of Android 14 with boot image version 4 for : - AM62X-SK EVM: https://www.ti.com/tool/SK-AM62B - BeaglePlay: https://beagleplay.org/ - AM62PX-SK EVM: https://www.ti.com/tool/SK-AM62P-LP Android Images use to test this series are on the Official TI website: - AM62x/BeaglePlay: https://www.ti.com/tool/PROCESSOR-SDK-AM62X - AM62PX: https://www.ti.com/tool/PROCESSOR-SDK-AM62P
2024-10-02board: ti: am62px: Add android bootflow supportMattijs Korpershoek
When CONFIG_BOOTMETH_ANDROID is set, enable Android boot flow support. To build for AM62Px for Android, we can re-use the am62x_a53_android.config fragment when building A53 bootloaders: $ make am62px_evm_a53_defconfig $ make am62x_a53_android.config $ make Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Reviewed-by: Bryan Brattlof <bb@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 04:54:30 +0000