| Age | Commit message (Collapse) | Author |
|---|
|
Rename the variable to 'ptr' since it is a pointer, not an address. Make
sure to unmap the pointer.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The current implementation casts an address to a pointer. Make it more
sandbox-friendly by using map_sysmem().
Rename the variable to 'ptr' since it is a pointer, not an address.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
An address may be mapped twice and unmapped twice. Delete the mapping
only when the last user unmaps it.
Fix a missing comment while here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a little debugging to this driver. Convert the existing debugging to
use logging.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
So far unmapping has not been implemented. This means that if one test
maps a pointer to an address with map_sysmem(), then a second test can
use that same pointer, by mapping the address back to a pointer with
map_to_sysmem(). This is not really desirable, even if it doesn't
cause any problems at the moment.
Implement unmapping, to clean this up.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use log_debug() instead of including the function name in the string.
Add one more debug for PCI.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sandbox keeps a table of addresses which map to pointers which are
outside its emulated DRAM. The current range from 10000000 conflicts
with the PCI range, meaning that if PCI mapping is on, that particular
address can be decoded by PCI instead of the table.
Fix this by moving the range up to the top of memory. Update the docs
while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
U-Boot commands typically don't need 0x to specify hex, since they use
hex by default. Adding 0x in this test is confusing since it suggests
that it is necessary. Drop it from the file.
Also use the %#x construct to get the 0x when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Switch to lower-case hex which is more commonly used in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Clear any USB-keyboard devices before running a unit test, to avoid
using a stale udevice pointer in stdio. Add a long comment to explain
this situation and why this solution seems best, at least for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This device contains a pointer to struct udevice so set the flag
indicating that, just to be tidy.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a new category which covers the console, including the stdio
drivers.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The driver model deadline for USB was in 2019, so drop the old USB
keyboard code, to avoid needing to deal with the extra code path.
Drop the unnecessary #ifdef around USB_KBD_BOOT_REPORT_SIZE while we
are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set up a function for this, since it needs to be used from multiple test
files.
This test file is only used on sandbox, where USB is enabled, so drop
the local declaration of usb_started
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There have been quite a few changes in the Python scripts, so update the
pylint baseline.
This was created using:
make pylint
cp pylint.cur scripts/pylint.base
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Tidy up most of these warnings. Remaining are four of these:
R0914: Too many local variables
which can only by fixed by splitting things into functions, so that is
left for another time.
Part of this change was done by the flynt tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Devices should be probed when they are used, not before. Drop this
boot-time probing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We should not need to announce this device. Drop the message.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The OSD command calls functions from video_osd-uclass.o ,
which is built only when CONFIG_OSD is enabled. Add the
missing dependency into Kconfig.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The mmc erase command currently requires blk# and cnt parameters
which can be obtained using the part start and part size commands
if the entire partition needs to be erased.
Simplify the use of the mmc erase command by allowing the partition
name to be specified directly.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
The mmc speed command configuration option keeps showing up in
Kconfig directly in 'Command line interface'. Move MMC_SPEED_MODE_SET
under CMD_MMC to make it show up alongside the MMC command.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Jim Liu <jim.t90615@gmail.com> says:
Modify npcm8xx new boot design.
Correct memory setting and set gpio default value.
|
|
Clear all gpio events to avoid unexpected interrupts
during kernel booting.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
|
|
Change env offset and boot address for new design.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
|
|
If CONFIG_SYS_MEM_TOP_HIDE is defined, gd->ram_size is reduced by
CONFIG_SYS_MEM_TOP_HIDE. Need to correct the actual ram size in
dram_init_banksize.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
|
|
Aspeed AST27xx SoCs integrate the CPTRA 1.0 secure IP, which
export a SHA accelerator interface for SoC to use.
Note that CPTRA 1.0 supports only SHA384 and SHA512 and this
patch is verified by the 'hash test sha384/sha512' commands.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
|
|
Prepare v2024.10-rc5
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
We shouldn't have had the link to our git tree be contained within "``"
as that meant that it did not work as a link, so remove those. And
rather than make this a link plus text, keep this as a link within the
text for overall clarity.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Francis Laniel <francis.laniel@amarulasolutions.com> says:
Hi!
With this series, I bumped the new hush to get the latest commits from upstream.
Also, I added back a reverted commit which goal was to fix a bad behavior in
old hush test.
I had to tweak a bit this commit, but everything worked both locally and in the
CI.
|
|
This commit adds the following hush busybox upstream commits:
23da5c4b716b ("hush: do not exit interactive shell on some redirection errors")
14e28c18ca1a ("hush: fix "exec 3>FILE" aborting if 3 is exactly the next free fd")
6c38d0e9da2d ("hush: avoid duplicate fcntl(F_SETFD, FD_CLOEXEC) during init")
758b21402abc ("hush: detect when terminating "done"/"fi" is missing")
2639f3bc72ac ("hush: set G.ifs sooner (prevents segfault)")
Adding specific ifdef and endif guard was needed for 2639f3bc72ac.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
This was done to keep compatibility with the existing behavior.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With e58bafc35fe3 ("lib: membuff: fix readline not returning line in case of overflow")
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_skipline();
}
ut_assert_console_end();
The if block mentioned above that calls console_record_reset_enable() is
completely removed as fixed by e58bafc35fe3.
[flaniel: adapt second if]
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
[flaniel: remove console_record_reset_enable() if]
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Fix link errors caused by missing Kconfig dependencies:
1. DFU_OVER_USB compiles common/dfu.c which calls g_dnl_clear_detach()
which is implemented in drivers/usb/gadget/g_dnl.c which needs
USB_GADGET_DOWNLOAD. Test case:
$ printf "CONFIG_USB_GADGET_DOWNLOAD=n\nCONFIG_USB_FUNCTION_FASTBOOT=n" \
>>configs/am62px_evm_a53_defconfig
$ make am62px_evm_a53_defconfig
$ make CROSS_COMPILE=aarch64-linux-gnu-
[...]
common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach
[...]
2. With the above fixed, the same build causes:
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'
This is because SPL_DFU compiles common/spl/spl_dfu.c which calls
run_usb_dnl_gadget() which is implemented in common/dfu.c which needs
DFU_OVER_USB.
Therefore add these dependencies to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240910102751.3182982-1-jerome.forissier@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20241024
UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-10-rc4
* doc/develop/sending_patches.rst: Clarify when to use which branch
* doc/arch/m68k.rst: Update toolchain comment
* doc/arch/mips.rst: Update toolchain list
* doc: Update rST to not reference the old wiki
* doc/mkeficapsule.1: Update homepage link
* bootcount: Update to point to current documentation
* binman: Update links for sending patches
|
|
When linking to our documentation for submitting patches, we shouldn't
point at the old wiki but instead our current documentation.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The current documentation for the bootcount API is on our website and
not the old wiki, update the link in two places.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The project home page is no longer the old wiki, but
https://www.u-boot.org/
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
In two places we had references to the old wiki pages instead of links
to the relevant part of our documentation. Update (and slightly reword)
these spots.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove both the ELDK and emdebian links as they are broken, and add a
link to the kernel.org toolchains which we use in CI.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The old wiki page has not exited for quite some time, update to note
what we build with in CI at least.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The previous wording on the paragraph about what branch to use when
submitting patches did not reflect how / when the next branch is
currently used. Reword this to note that master should be used for bug
and regression fixes, always, and that next should be used once it
opens, with -rc2.
Reported-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
This was lost in a later commit, so add it back.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
At present EFI output to the console uses fputs() which bypasses the
console-recording feature. This makes it impossible for tests to check
the output of an EFI app.
There doesn't seem to be any need to do this bypass, so adjust it to
simply use the puts() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Add a test to check the version/variant bits of v4 and v5 UUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add some basic unit tests to validate that the UUID generation behaves
as expected. This matches the implementation in efi_loader for sandbox
and a Qualcomm board and should catch any regressions.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add support for generating GUIDs that match those generated internally
by U-Boot for capsule update fw_images when using dynamic UUIDs.
Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
with the board compatible and fw_image name. This feature just provides
a way to determine the UUIDs for a particular board without having to
actually boot U-Boot on it.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Replace the use of libuuid with U-Boot's own UUID library. This prepares
us to add support for generating v5 GUIDs.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Adjust the UUID library code so that it can be compiled as part of a
host tool.
This removes the one redundant log_debug() call, as well as the
incorrectly defined LOG_CATEGORY.
In general this is a fairly trivial change, just adjusting includes and
disabling list_guid.
This will be used by a new genguid tool to generate v5 GUIDs that match
those generated by U-Boot at runtime.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
