| Age | Commit message (Collapse) | Author |
|---|
|
Correct the timer node of dts
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm into next
Up to now we configure the entire memory space for U-Boot as RWX.
For modern architectures and security requirements, it's better to
map the memory properly.
This pull request adds basics support for mapping the U-Boot binary with
proper (RO, RW, RW^X) memory permissions on aarch64 right after we
relocate U-Boot in the top of DRAM.
It's worrth noting that the linker script annotations are only added for
the aarch64 architecture. We can, in the future, try to unify the linker --
at least for the architectures that have enough in common and expand this
|
|
Now that we have everything in place switch the page permissions for
.rodata, .text and .data just after we relocate everything in top of the
RAM.
Unfortunately we can't enable this by default, since we have examples of
U-Boot crashing due to invalid access. This usually happens because code
defines const variables that it later writes. So hide it behind a Kconfig
option until we sort it out.
It's worth noting that EFI runtime services are not covered by this
patch on purpose. Since the OS can call SetVirtualAddressMap which can
relocate runtime services, we need to set them to RX initially but remap
them as RWX right before ExitBootServices.
Link: https://lore.kernel.org/u-boot/20250129-rockchip-pinctrl-const-v1-0-450ccdadfa7e@cherry.de/
Link: https://lore.kernel.org/u-boot/20250130133646.2177194-1-andre.przywara@arm.com/
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
For armv8 we are adding proper page permissions for the relocated U-Boot
binary. Add a weak function that can be used across architectures to change
the page permissions
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905X-CC
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The ARM ARM (Rev L.a) on section 8.17.1 describes the cases where
break-before-make is required when changing live page tables.
Since we can use a function to tweak block and page permissions,
where BBM is not required split the existing mmu_change_region_attr()
into two functions and create one that doesn't require BBM. Subsequent
patches will use the new function to map the U-Boot binary with proper
page permissions.
While at it add function descriptions in their header files.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Upcoming patches are switching the memory mappings to RW, RO, RX
after the U-Boot binary and its data are relocated. Add
annotations in the linker scripts to and mark text, data, rodata
sections and align them to a page boundary.
It's worth noting that .efi_runtime memory permissions are left
untouched for now. There's two problems with EFI currently.
The first problem is that we bundle data, rodata and text in a single
.efi_runtime section which also must be close to .text for now.
As a result we also dont change the permissions for anything contained
in CPUDIR/start.o. In order to fix that we have to decoule .text_rest,
.text and .efi_runtime and have the runtime services on their own
section with proper memory permission annotations (efi_rodata etc).
The efi runtime regions (.efi_runtime_rel) can be relocated by the OS when
the latter is calling SetVirtualAddressMap. Which means we have to
configure those pages as RX for U-Boot but convert them to RWX just before
ExitBootServices. It also needs extra code in efi_tuntime relocation
code since R_AARCH64_NONE are emitted as well if we page align the
section.
Due to the above ignore EFI for now and fix it later once we have the
rest in place.
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905X-CC
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Since we added support in meminfo to dump live page tables, describe
the only working architecture for now (aarch64) and add links to public
documentation for further reading.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Upcoming patches are mapping memory with RO, RW^X etc permsissions.
Fix the meminfo command to display them properly
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25142
- Support Toradex i.MX6 Apalis/Colibri v1.2 SoM.
- Guard tee.bin inclusion on imx9,
- Remove unneeded regulator entry on DH i.MX6 DHCOM DRC02 devicetree.
- Add i.MX mailbox driver
- Convert ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE to Kconfig.
- Cope with existing optee node on imx8m.
|
|
Add a new config option under "General setup" to enable the -Werror flag
when building U-Boot. This is useful during development to help catch
mistakes.
This is based on a similar config option added to the Linux kernel by
Linus in 2021 - see Linux commit 3fe617ccafd6 ("Enable '-Werror' by
default for all kernel builds"). The modification of KBUILD_CFLAGS is
done in Makefile.extrawarn, matching where it was moved in the kernel by
Linux commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn").
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
- Check return value of fdt_getprop for NULL.
- Return -EFAULT if 'algo' property is missing.
- Prevent NULL pointer dereference in strcmp."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
|
|
Driver uses dev_get_priv() but never allocates it in its
declaration leading to various crashes. Fix this by explicitly
allocating the storage.
Fixes: 9b0b5648d6e4 ("memory: Add TI GPMC driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Update rm-cfg.yaml and tifs-rm-cfg.yaml to account for the
changes added in the K3 Resource Partitioning Tool v1.18
The change enables resource sharing between A72_2 and MAIN_0_R5_0
for the BCDMA CSI RX and TX channels, J784S4 supports upto 12
CSI cameras and 16 channels would not be enough for all such use
cases for RTOS and Linux, thus sharing of resources in needed. Resource
sharing between A72 and R5 for BCDMA CSI channels allow Linux to use 32
channels at a time.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
[n-francis@ti.com: rebased and sent on behalf]
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
|
|
While the code was removed in commit 3766a249a3c0 ("fs: drop reiserfs")
this reference in the Makefile was missed. Remove it now.
Fixes: 3766a249a3c0 ("fs: drop reiserfs")
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Some device trees may not have a reserved-memory node. Rather than
exiting early we should create a new reserved-memory node along with
the memory carveout for the firmware we (U-Boot) have placed.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
|
|
This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
HOSTCFLAGS of some tools components (image-host, rsa-sign and
ecdsa-libcrypto) depend on the directory where openssl is installed.
Add them via pkg-config.
This fixes a potential build failure in tools when openssl in installed
in varied directories.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
We had missed removing the coreboot directory once done, fix this.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This patch provides a driver for i.MX Messaging Unit (MU) using the
commom mailbox framework.
This is ported from Linux (v6.12.8) driver
drivers/mailbox/imx-mailbox.c. Its commit SHA is:
39d7d6177f0c ("mailbox: imx: use device name in interrupt name")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
|
|
The regulator extras should be placed in the USB H1 regulator node,
the /regulator-usb-h1-vbus. They are already present there in the
upstream DT, so delete this bogus node entirely.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
On i.MX8M SoCs, the /firmware/optee Devicetree node is created just before
booting the OS when OP-TEE is found running. If the node already exists,
this results in an error, which prevents the OS to boot:
Could not create optee node.
ERROR: system-specific fdt fixup failed: FDT_ERR_EXISTS
- must RESET the board to recover.
failed to process device tree
On the i.MX8M systems where CONFIG_OF_SYSTEM_SETUP is defined, the
ft_add_optee_node() function is called before booting the OS. It will
create the OP-TEE Devicetree node and populate it with reserved memory
informations gathered at runtime.
On on most i.MX8M systems the Devicetree is built with an optee node if
CONFIG_OPTEE is defined. This node is indeed necessary for commands and
drivers communicating with OP-TEE, even before attempting OS boot.
The aforementioned issue can happen on the Compulab IOT-GATE-iMX8, which is
the only in-tree i.MX8M system where both CONFIG_OPTEE and
CONFIG_OF_SYSTEM_SETUP are defined (see the imx8mm-cl-iot-gate*
defconfigs).
Deal with an existing optee node gracefully at runtime to fix this issue.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Tim Harvey <tharvey@gateworks.com>
|
|
When "fdtfile" is not set, use the "variant" environment variable to
select the correct DTB.
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/Touch controller
which is EOL with the TLA2024 ADC and AD7879 touch controller. They thus
require a different DTB, which we can easily select with the variant env
variable.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Apalis/Colibri iMX6 V1.2 will replace the STMPE811 ADC/Touch controller
which is EOL by the TLA2024 ADC and AD7879 touch controller.
To support this new version, we detect the presence of the TLA2024
during boot and set a new environment variable named "variant". This
will allow us and users to select the correct DT easily.
By probing via I2C we have a robust detection method instead of relying
on the existing "board_rev" environment variable which is set by the
config block. Users can use "variant" in their DT selection and do not
have to map the board revision to a device tree.
"variant" environment variable behaviour:
* Empty or absent for all versions below v1.2 (STMPE811)
* "-v1.2" for all versions starting from v1.2 (TLA2024 + AD7879)
Usage example:
setenv fdtfile imx6q-apalis${variant}-${fdt_board}.dtb
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Guard the inclusion of tee.bin with the CONFIG_OPTEE symbol to fix the
following build warning:
CHECK u-boot-container.cfgout
WARNING './tee.bin' not found, resulting binary may be not-functional
BINMAN .binman_stamp
OFCHK .config
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
The flag for enabling the ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE quirk can be
handled easily enough in Kconfig. This lets us remove a function but not
obviously correct usage of the IS_ENABLED() macro.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Simon Glass <sjg@chromium.org> says:
This series was split from the VBE part H series. It adjusts the logic
for selecting the top of the stack so that it is more consistent across
xPL phases.
Link: https://lore.kernel.org/r/20250228122042.1277079-1-sjg@chromium.org
|
|
VPL has the same needs as TPL in situations where the stack is at the
top of SRAM. Add an option for this and implement it for arm
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Now that we have the same option for SPL and TPL, simplify the logic for
determining the initial stack.
Note that this changes behaviour as current SPL_STACK is a fallback for
TPL. However, that was likely unintended and can be handled with Kconfig
defaults if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
|
|
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
|
|
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This series from Greg Malysa <malysagreg@gmail.com> provides two more
fixes for the mach-sc5xx platforms.
Link: https://lore.kernel.org/r/20250228185837.25741-1-malysagreg@gmail.com
|
|
The sc5xx machine code includes implementations of board_init and
board_early_init_f which should not be included in the base soc support
code, as they should be implemented by a board where necessary.
This removes the default empty implementations of both from mach-sc5xx.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
|
|
The arm library includes an implementation of bss_clear that is already
called from crt0.S. This re-clearing of BSS should not be performed in
the machine code and should therefore be removed.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
|
|
Santhosh Kumar K <s-k6@ti.com> says:
This series is to update the DDR configurations of AM64x EVM, AM62x SK,
AM62x LP SK, AM62Ax SK and AM62Px SK boards according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Test logs: https://gist.github.com/santhosh21/43723900f3615e4cf98da57ed9618cf9
Link: https://lore.kernel.org/r/20250226063923.2266288-1-s-k6@ti.com
|
|
Update the DDR Configurations for AM62Px SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
|
|
Update the DDR Configurations for AM62Ax SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
|
|
Update the DDR Configurations for AM62x LP SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
|
|
Update the DDR Configurations for AM62x SK according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
|
|
Update the DDR Configurations for AM64x EVM according to the SysConfig
DDR Configuration tool for AM64x, AM625, AM623, AM62Ax, AM62Px v0.10.02.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-stm into next
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
|
|
This series from Leonard Anderweit <l.anderweit@phytec.de> provides some
improvements to the binman tool and i.MX specific tooling then makes use
of it.
Link: https://lore.kernel.org/r/20250226210501.72794-1-l.anderweit@phytec.de
|
|
Build the imx code singing tool from source instead of relying on the
distro to provide the tool.
Use the debian/unstable branch because the default branch is outdated.
The binary is supposed to be build with docker, work around that by selecting
the correct Makefile directly.
Also append the description and add a link to documentation.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add optional argument make_path to build_from git. The new argument
allows specifying the path to a Makefile in case it is not in the root
of the git repo.
Also adjust the corresponding test.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add optional argument git_branch to build_from_git. The new argument
allows specifying which branch of the repo to use.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Greg Malysa <malysagreg@gmail.com> says:
This series adds all of the supported peripheral drivers for the sc5xx
series of SoCs from Analog Devices and other drivers that are used by
the evaluation kits, such as a GPIO expander used by the EZLITE carrier
boards. This series passes gitlab CI tests.
Link: https://lore.kernel.org/r/20250226173150.13198-1-malysagreg@gmail.com
|
|
Co-developed-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
|
|
This adds support for the ADI-specific SPI driver present in the ADI
SC5xx line of SoCs. This IP block is distinct from the QSPI/OSPI block
that uses the Cadence driver. Both may be used at once with appropriate
pin muxing configuration.
Co-developed-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Co-developed-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
|
|
This adds the ability to load ldr-formatted files to the SHARC
coprocessors using the rproc interface. Only a minimal subset
of rproc functionality is supported: loading and starting
the remote core.
Secure boot and signed ldr verification are not available
at this time through the U-Boot interface.
Co-developed-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Co-developed-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
|
|
Add a rudimentary MDMA driver for the Analog Devices SC5xx SoCs,
primarily intended for use with and tested against the QSPI/OSPI
IP included in the SoC.
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
|
|
Co-developed-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
