summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-02arm: dts: add imx8mm-cl-iot-gate dts fileYing-Chun Liu (PaulLiu)
Add board dts for imx8mm-cl-iot-gate Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02net: fec: Only unregister MII bus if we registered itSean Anderson
If we fail to probe for whatever reason, we cannot unregister/free the MII bus unless we registered it with fec_get_miibus. This fixes FECs sharing an MDIO bus from destroying it, preventing the other FEC from using it. Fixes: 6a895d039b ("net: Update eQos driver and FEC driver to use eth phy interfaces") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-05-02net: fec: Don't use disabled physSean Anderson
If a phy is disabled, don't use it. This matches Linux's behavior. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-05-02pci: pci-uclass: Add board_pci_fixup_dev for DM_PCITim Harvey
Add a board_pci_fixup_dev weak function to allow PCI device fixups during enumeration. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02pci: Update the highest subordinate bus number for bridge setupMasami Hiramatsu
Update the highest subordinate bus number after probing the devices under the bus for setting up the bridge correctly. The commit 42f3663a3f67 ("pci: Update to use new sequence numbers") removed this but it is required if a PCIe bridge is under the bus. Fixes: 42f3663a3f67 ("pci: Update to use new sequence numbers") Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-05-02arm: dts: imx6qdl-gw552x.dtsi: fix VBUS supplyTim Harvey
Remove the invalid 'regulator-always-on' property to resolve: starting USB... Bus usb@2184000: Error enabling VBUS supply (ret=-13) probe failed, error -13 Bus usb@2184200: USB EHCI 1.00 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02imx: ventana: add delay before reading EEPROMTim Harvey
fixes: d863d054397a ("imx: ventana: convert U-Boot to OF_CONTROL using FIT image") Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoMJagan Teki
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. General features: - NXP i.MX8M Mini - Up to 2GB LDDR4 - 8/16GB eMMC - Gigabit Ethernet - USB 2.0 Host/OTG - PCIe Gen2 interface - I2S - MIPI DSI to LVDS - rest of i.MX8M Mini features i.Core MX8M Mini needs to mount on top of Engicam baseboards for creating complete platform solutions. Linux dts commit details: commit <470d6dad5ddd> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM") Add support for it. Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02arm64: dts: imx8mm: Add common -u-boot.dtsiJagan Teki
/soc@0 aips1 aips2 aips3 clk iomuxc osc_24m are common node enablements across imx8mm platform for dm-spi, dm-pre-reloc stages. Move them into common dtsi, imx8mm-u-boot.dtsi Cc: Tim Harvey <tharvey@gateworks.com> Cc: Adam Ford <aford173@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Teresa Remmet <t.remmet@phytec.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02include: configs: ge: avoid shell on boot failureIan Ray
Prevent shell access on boot failure by entering an infinite loop. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02include: configs: ge: simplify default boot commandIan Ray
Minor cosmetic changes to unify `CONFIG_EXTRA_ENV_SETTINGS' indentation between Bx50v3 and PPD to make comparison and review easier and simplify the default boot command. Signed-off-by: Ian Ray Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02include: configs: ge: bx50v3: drop USB bootIan Ray
Remove unsupported USB boot. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02configs: ge: use non-persistent environmentIan Ray
Disable the unused persistent environment. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02configs: ge: bx50v3: adjust watchdog periodIan Ray
Increase watchdog period, in order to accomodate recent kernel size and configuration changes. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02board: ge: bx50v3: add phy reset GPIOSebastian Reichel
Add PHY's reset GPIO, so that U-Boot does a PHY hard reset. This is needed, since the PHY might become unresponsive if watchdog reboots the system while a transaction is ongoing. The reset GPIO is added to the U-Boot specific DT files, since the kernel does not setup the reserved registers correctly after resetting the PHY and thus must not reset it. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02board: ge: bx50v3: fix crystal bitSebastian Reichel
The DA9063 enables the CRYSTAL bit by default, but there is no crystal populated on the BA16 system on module. Without explicitly clearing the CRYSTAL bit the system runs unstable and sometimes reboots unexpectedly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-05-02Makefile: Fix generation of flash.bin u-boot.itb with binmanMarek Vasut
In case binman is enabled, the u-boot.itb is generated using this tool and there is no direct u-boot.itb target, but instead the binman tool must be invoked. Add support for this case. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-04-29Merge tag 'dm-pull-29apr21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm buildman environment fix binman FMAP improvements minor test improvements and fixes minor dm improvements
2021-04-29Merge tag 'xilinx-for-v2021.07-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
2021-04-29spi: zynqmp: Remove gd referenceMichal Simek
gd is not used in this file that's why doesn't make sense to declare it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-29Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashTom Rini
- mtd: cfi: Fix PPB lock status readout (Marek)
2021-04-29Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add base support for Marvell OcteonTX2 CN9130 CRB (mostly done by Kostya) - Sync Armada 3k/7k/8k SERDES code with Marvell version (misc Marvell authors) - pci-aardvark: Fix processing PIO transfers (Pali)
2021-04-29tpm: missing event typesHeinrich Schuchardt
Add a reference for the TPM event types and provide missing constants. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-04-29test: dm: add test item for ofnode_get_addr() and ofnode_get_size()Chen Guanqiao
Add test item for getting address and size functions Test the following function: - ofnode_get_addr() - ofnode_get_size() Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29dm: core: Add size operations on device tree referencesChen Guanqiao
Add functions to add size of addresses in the device tree using ofnode references. If the size is not set, return FDT_SIZE_T_NONE. Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29buildman: Use bytes for the environmentSimon Glass
At present we sometimes see problems in gitlab where the environment has 0x80 characters or sequences which are not valid UTF-8. Avoid this by using bytes for the environment, both internal to buildman and when writing out the 'env' file. Add a test to make sure this works as expected. Reported-by: Marek Vasut <marex@denx.de> Fixes: e5fc79ea718 ("buildman: Write the environment out to an 'env' file") Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29buildman: Handle exceptions in threads gracefullySimon Glass
There have been at least a few cases where an exception has occurred in a thread and resulted in buildman hanging: running out of disk space and getting a unicode error. Handle these by collecting a list of exceptions, printing them out and reporting failure if any are found. Add a test for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29buildman: Use common code to send an resultSimon Glass
At present the code to report a build result is duplicated. Put it in a common function to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29buildman: Tidy up a few commentsSimon Glass
Add some function comments which are missing, or missing arguments. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29dm: core: Fix uninitialized return value from dm_scan_fdt_nodeSean Anderson
If there are no nodes or if all nodes are disabled, this function would return err without setting it first. Fix this by initializing err to zero. Fixes: 94f7afdf7e ("dm: core: Ignore disabled devices when binding") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29dm: core: Add address translation in fdt_get_resourcePatrick Delaunay
Today of_address_to_resource() is called only in ofnode_read_resource() for livetree support and fdt_get_resource() is called when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required, but the address translation is done by ofnode_read_resource() caller, for example in drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() { ... ret = ofnode_read_resource(args.node, 0, &resource); if (ret) return ret; faddr = cpu_to_fdt32(resource.start); paddr = ofnode_translate_address(args.node, &faddr); ... The both behavior should be aligned and the address translation must be called in fdt_get_resource() and removed for each caller. Fixes: a44810123f9e ("dm: core: Add dev_read_resource() to read device resources") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-29binman: Support adding sections to FMAPsSimon Glass
When used with hierarchical images, use the Chromium OS convention of adding a section before all the subentries it contains. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29binman: Tweak implementation of fmapSimon Glass
Use an interator in two of the fmap tests so it is easier to add new items. Also check the name first since that is the first indication that something is wrong. Use a variable for the expected size of the fmap to avoid repeating the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29patman: Parse checkpatch by message instead of by lineEvan Benn
Parse each empty-line-delimited message separately. This saves having to deal with all the different line content styles, we only care about the header ERROR | WARNING | NOTE... Also make checkpatch print line information for a uboot specific warning. Signed-off-by: Evan Benn <evanbenn@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29patman: Assume we always have pygit2 for testsTom Rini
Given that we have tests that require pygit2 and it can be installed like any other python module, fail much more loudly if it is missing. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-29tests: patman: Add requests to the module listTom Rini
The patman tests require the requests module, add it. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-29Azure/GitLab: Ensure we use requirements.txt for testsuitesTom Rini
Given that test/py/requirements.txt has all required test modules, make use of that rather than a manual pip install list before running our assorted tool testsuites. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-29test: Use positive conditional in test_matches()Andy Shevchenko
It is easier to read the positive conditional. While at it, convert hard coded length of "_test_" to strlen("_test_") which will be converted to a constant bu optimizing compiler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29test: Allow simple glob pattern in the test nameAndy Shevchenko
When run `ut dm [test name]` allow to use simple pattern to run all tests started with given prefix. For example, to run all ACPI test cases: ut dm acpi* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29dtoc: Correct dtoc output when testingSimon Glass
At present each invocation of run_steps() updates OUTPUT_FILES_COMMON, since it does not make a copy of the dict. This is fine for a single invocation, but for tests, run_steps() is invoked many times. As a result it may include unwanted items from the previous run, if it happens that a test runs twice on the same CPU. The problem has not been noticied previously, as there are few enough tests and enough CPUs that is is rare for the 'wrong' combination of tests to run together. Fix this by making a copy of the dict, before updating it. Update the tests to suit, taking account of the files that are no-longer generated. With this fix, we no-longer generate files which are not needed for a particular state of OF_PLATDATA_INST, so the check_instantiate() function is not needed anymore. It has become dead code and so fails the code-coverage test (dtoc -T). Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-29binman: Correct testSplNoDtb() and Tpl alsoSimon Glass
These two tests require an ELF image so that symbol information can be written into the SPL/TPL binary. At present they rely on other tests having set it up first, but every test must run independently. This can cause occasional errors in CI. Fix this by setting up the required files, as other tests do. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-04-29net: phy: xilinx: Break while loop over ethernet phyMichal Simek
The commit 6c993815bbea ("net: phy: xilinx: Be compatible with live OF tree") change driver behavior to while loop which wasn't correct because the driver was looping over again and again. The reason was that ofnode_valid() is taking 0 as correct value. Fix it by changing while loop to ofnode_for_each_subnode() which is only loop over available nodes. Fixes: 6c993815bbea ("net: phy: xilinx: Be compatible with live OF tree") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-29arm: a37xx: pci: Fix processing PIO transfersPali Rohár
Trying to clear PIO_START register when it is non-zero (which indicates that previous PIO transfer has not finished yet) causes an External Abort with SError 0xbf000002. This bug is currently worked around in TF-A by handling External Aborts in EL3 and ignoring this particular SError. This workaround was also discussed at: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 Implement a proper fix to prevent this External Abort. As it is not possible to cancel a pending PIO transfer, simply do not start a new one if previous has not finished yet. In this case return an error to the caller. In most cases this SError happens when there is no PCIe card connected or when PCIe link is down. The reason is that in these cases a PIO transfer takes about 1.44 seconds. For this reason we also increase the wait timeout in pcie_advk_wait_pio() to 1.5 seconds. If PIO read transfer for PCI_VENDOR_ID register times out, or if it isn't possible to read it yet because previous transfer is not finished, return Completion Retry Status value instead of failing, to give the caller a chance to send a new read request. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-29doc: dt-bindings: add Marvell comphy bindingIgal Liberman
Change-Id: I29094afb646744afe78ad09bb7479894d1a65e96 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: utmi: update utmi config which fixes usb2.0 instabilityGrzegorz Jaszczyk
- Add additional step which enables the Impedance and PLL calibration. - Enable old squelch detector instead of the new analog squelch detector circuit and update host disconnect threshold value. - Update LS TX driver strength coarse and fine adjustment values. Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: add support for SFI1Igal Liberman
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: fix pll initialization for second utmi portGrzegorz Jaszczyk
According to Design Reference Specification the PHY PLL and Calibration register from PHY0 are shared for multi-port PHY. PLL control registers inside other PHY channels are not used. This commit reworks utmi device tree nodes in a way that common PHY PLL registers are moved to main utmi node. Accordingly both child nodes utmi-unit range is reduced and register offsets in utmi_phy.h are updated to this change. This fixes issues in scenarios when only utmi port1 was in use, which resulted with lack of correct pll initialization. Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: allow to initialize up to 6 USB portsGrzegorz Jaszczyk
New products can contain up to 6 usb ports, therefore allow to initialize all relevant UTMI PHYs. Change-Id: I28c36e59fa0e3e338bb3ee0cee2240b923f39785 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-21 06:39:51 +0000