| Age | Commit message (Collapse) | Author |
|---|
|
Booting R-Car Gen3 arm64 U-Boot with CONFIG_UBSAN=y resulted in:
=====================================================================
UBSAN: Undefined behaviour in drivers/net/phy/phy.c:728:19
left shift of 1 by 31 places cannot be represented in type 'int'
=====================================================================
Fix it by appending the UL suffix to the numeric literal. While at it,
convert the type of "addr" variable from signed to unsigned, to protect
against shifting the numeric literal by a negative value (which would
lead to yet another undefined behavior).
Fixes: 1adb406b0141 ("phy: add phy_find_by_mask/phy_connect_dev")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
* Using U-suffix for integer is sufficient.
* ffs() of non-zero value cannot be 0. But addr being unsigned is
* preferable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Configure LEDs on BCM54210E so they would blink on activity
and indicate link speed. Without this the LEDs are always on
if cable is plugged in.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
The issue occurs the UAF (use-after-free) to cause double free
when do the realloc function for the pointers during the
reinitialization NC-SI process, and it will cause the memory
management occurs error.
So, nullify these pointers after free.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
|
|
Prepare v2024.04-rc5
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2024.07 cycle:
- This feature set includes a new board named sama7g54 Curiosity.
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic
- fix Ethernet and random MAC's on WeTek Hub/Play2
- fix buffer overflow in serial, mac & usid read
|
|
While meson_sm_read_efuse() doesn't overflow, the string is not
zero terminated and env_set*() will buffer overflow and add random
characters to environment.
Acked-by: Viacheslav Bocharov <adeep@lexina.in>
Link: https://lore.kernel.org/r/20240320-u-boot-fix-p200-serial-v2-1-972be646a301@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add a fall-back method to generate ethaddr from CPU serial on p200 boards
if the MAC cannot be read from efuse. This prevents random MAC addresses
on the WeTek Hub/Play2 boards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240324151905.3817732-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Placing the snps,reset content needed for Ethernet to probe in a common
uboot.dtsi results in the content not being used and broken Ethernet. Fix
this by creating two board specific dtsi files with the right content.
Fixes: 67d5128df950 ("ARM: dts: add support for WeTek Hub and WeTek Play2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240324151905.3817732-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
- Add ahab_commit command support.
- Add USB support for the imx93-phyboard-segin board.
- Add i.MX8MP PCIe support.
- Fix netboot environment on phycore_imx8mp.
|
|
The "run netargs" command should come later in the "netboot" command
order when using dhcp since it sets the server and client ip addresses.
The previous order led to misconfigured kernel boot params and thus
kernel panic when serverip was not manually set.
Further, following Linux FHS 3.0, change the nfsroot default directory
to /srv/nfs.
Fixes: 60f64bec414e ("board: phytec: phycore_imx8mp: Add fec support")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
|
|
Enable the `fastboot` command.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
Add USB support by enabling `usb` command and required USB drivers.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
Enable both usbotg1 and usbotg2 ports. Disable over-current as OC pins are
not connected to the SoC.
This addition to imx93-phyboard-segin-u-boot.dtsi is temporary,
until USB support is added to imx93-phyboard-segin.dts in Linux.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
This message is used to commit into the fuses any new SRK revocation and
FW version information that have been found into the NXP (ELE FW) and
OEM containers.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
|
|
Add myself as maintainer for PCIe DWC IMX driver support.
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Enable PCIe/NVMe support. Also, enable the reset, regmap and syscon
drivers which are a prerequisite for PCIe support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[SG: rebased to next branch tip]
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Enable PCIe/NVMe support. Also, enable the reset driver which
is a prerequisite for PCIe support.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Since now we have the modern pcie_dw_imx.c driver for iMX SoCs,
encourage people to switch to that for any further new iMX SoC support
or even for the older iMX6 SoCs too.
Suggested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
pcie_imx doesn't seem to share any useful code for iMX8 SoC and it is
tied to quite old port of pcie_designware driver from Linux which
suffices only iMX6 specific needs.
But currently we have the common DWC specific bits which alligns pretty
well with DW PCIe controller on iMX8MP SoC. So lets reuse those common
bits instead as a new driver for iMX8 SoCs. It should be fairly easy to
add support for other iMX8 variants to this driver.
iMX8MP SoC also comes up with standalone PCIe PHY support, so hence we
can reuse the generic PHY infrastructure to power on PCIe PHY.
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe
PHY initialization moved to this standalone PHY driver.
Inspired from counterpart Linux kernel v6.8-rc3 driver:
drivers/phy/freescale/phy-fsl-imx8m-pcie.c. Use last Linux kernel driver
reference commit 7559e7572c03 ("phy: Explicitly include correct DT
includes").
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Expose the high performance PLL as clock framework clock, so the
PCIe PHY can use it when there is no external refclock provided.
Inspired from counterpart Linux kernel v6.8-rc3 driver:
drivers/pmdomain/imx/imx8mp-blk-ctrl.c. Use last Linux kernel driver
reference commit 7476ddfd36ac ("pmdomain: imx8mp-blk-ctrl: Convert to
platform remove callback returning void").
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add support for GPCv2 power domains and clock handling for PCIe and
PCIe PHY.
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add support for i.MX8MP reset controller, it has same reset IP inside
as the other iMX7 and iMX8M variants but with different module layout.
Inspired from counterpart Linux kernel v6.8-rc3 driver:
drivers/reset/reset-imx7.c. Use last Linux kernel driver reference
commit bad8a8afe19f ("reset: Explicitly include correct DT includes").
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
imx7_reset_{deassert/assert}_imx* are a bit more confusing when compared
with imx*_reset_{deassert/assert}. So refactor driver to use function
names easier to understand. This shouldn't affect the functionality
though.
Suggested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add support for PCIe clocks required to enable PCIe support on
iMX8MP SoC.
Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add APIs to set a firmware_name to a rproc and boot the rproc with the
same firmware.
Clients can call rproc_set_firmware() API to set firmware_name for a rproc
whereas rproc_boot() will load the firmware set by rproc_set_firmware() to
a buffer by calling request_firmware_into_buf(). rproc_boot() will then
load the firmware file to the remote processor and start the remote
processor.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
|
|
The K3 J721S2 SoCs have two C71x DSP subsystems in MAIN voltage domain,
and there are no C66x DSP subsystems on these SoCs. The C71x DSP subsystem
is a slighly updated version of the C71x DSP subsystem on J721e. The
C71x DSPs are 64 bit machine with fixed and floating point DSP
operations.
Extend support to the C71x DSPs with J721S2 compatible strings.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
|
|
The K3 J721S2 SoCs have three dual-core R5F subsystems, one in MCU
voltage domain and the other two in MAIN voltage domain. These R5F
clusters are similar to the R5F clusters in J7200 SoCs.
Compatible Info is updated to support J721S2 SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
|
|
Increase the SPL_STACK_R_MALLOC_SIMPLE_LEN to 0x200000 to accommodate the
size of tispl.bin fit image. With the recent upgrade of ti-linux-firmware
from version v9.1.0 to v9.2.5, the size of tispl.bin fit image has
increased to 1.4MB, causing allocation errors in the R5 SPL:
```
alloc space exhausted
Could not get FIT buffer of 1325056 bytes
check CONFIG_SPL_SYS_MALLOC_SIZE
```
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
The Linaro mail address is not valid anymore.
Cc: kojima.masahisa@socionext.com
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Masahisa Kojima <kojima.masahisa@socionext.com>
|
|
The lowest speed grade of Toradex AM62 SoMs is K speed, resulting in a
max value of 800MHz for the CPU operating frequency. A solution with
runtime selection of the CPU frequency is already planned to avoid these
kinds of problems in the future.
Fixes: 8fb8a6d49977 ("arm: dts: k3-am625-verdin-r5:Change CPU frequency to 1000MHz")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
|
|
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
the apalis-imx8qm board no longer boots.
The reason is that the imx8qm clock driver does not handle the
LPUART IPG clocks inside get_rate(), set_rate() and enable() functions.
Fix the boot regression by adding the LPUART IPG entries.
Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
the colibri-imx8qxp board no longer boots.
The reason is that the imx8qxp clock driver does not handle the
LPUART IPG clocks inside get_rate(), set_rate() and enable() functions.
Fix the boot regression by adding the LPUART IPG entries.
Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X
Acked-by: Sean Anderson <seanga2@gmail.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-04-rc5-2
Documentation:
* patman: Properly document the patchwork_url setting
* doc: man-page for if
* colibri-imx8x, apalis-imx8: update board documentation
UEFI:
* correct handling of EFI binary return code
* don't show usage help if EFI binary fails.
* correct error handling for bootefi selftest command
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20240321
Documentation:
* Avoid short reference link names in device-tree documentation.
UEFI/Video:
* Support code page 437 code points 1 - 31 used by GRUB
|
|
The "Series-patchwork-url:" tag description says that it overrides the
settings file but doesn't specify the name of the setting. Elsewhere
in the documentation about the "useful" settings we see a setting that
sounds promising called "patchwork_server" that's actually not a valid
setting. It should be "patchwork_url".
Fix these problems so the doc is right and more useful.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
|
|
%s/Synopis/Synopsis/g
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Provide a man-page for the if command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
If bootefi selftest is executed and a problem with the device-tree
installation occurs, efi_install_fdt() writes sensible error messages.
It never returns EFI_INVALID_PARAMETER. It neither makes sense to check
for EFI_INVALID_PARAMETER nor to show the usage help for the bootefi
command in this case.
Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
If an EFI binary returns an error code EFI_INVALID_PARAMETER, we show the
usage help for the bootefi command:
Shell> exit 0x8000000000000002
## Application failed, r = 2
bootefi - Boots an EFI payload from memory
Usage:
bootefi <image address>[:<image size>] [<fdt address>]
- boot EFI payload
bootefi bootmgr [fdt address]
- load and boot EFI payload based on BootOrder/BootXXXX variables.
If specified, the device tree located at <fdt address> gets
exposed as EFI configuration table.
This makes no sense.
Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We should not try to remove protocol interfaces from a NULL handle.
efi_run_image() should always return the return code of the executed EFI
binary.
Fixes: 6422820ac3e5 ("efi_loader: split unrelated code from efi_bootmgr.c")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Update and improve the building documentation of Apalis iMX8.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
|
|
Update and improve the building documentation of Colibri iMX8X.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
%s/Synopis/Synopsis/g
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Test that Unicode code points which map to CP437 code points 1-31 are
converted to '_'. This ensures no FAT file names do not contain chars
which are control characters in other code pages (CP 1250 for example).
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Draw symbols from Unicode's "Geometric shapes" page which translate to
code page 437 code points 1-31. These are used by UEFI applications to
draw user interfaces using EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.
The output has to be checked manually on the screen for correctness.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
UEFI applications rely on Unicode output capability, and might use that
for drawing pseudo-graphical interfaces using Unicode defined box
drawing characters.
Add a simple test to display the most basic box characters, which would
need to be checked manually on the screen for correctness.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
UEFI relies entirely on unicode output, which actual fonts displayed on
the screen might not be ready for.
Add a test displaying some international characters, to reveal missing
glyphs, especially in our builtin fonts.
This would be needed to be manually checked on the screen for
correctness.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
