summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-22usb: dwc3: Handle case where setup_phy is not neededSiva Durga Prasad Paladugu
If CONFIG_PHY is not enabled then the dwc3_setup_phy() returns ENOTSUPP which can be still valid and intentional so modify error check to handle this -ENOTSUPP. The same error handling exists in drivers/usb/host/xhci-dwc3.c already added by commit d648a50c0a27 ("dwc3: move phy operation to core.c"). Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-22usb: dwc2: add "u-boot,force-vbus-detection" for stm32Patrick Delaunay
On some board, the ID pin is not connected so the B session must be overridden with "u-boot,force_b_session_valid" but the VBus sensing must continue to be handle. To managed it, this patch adds a new DT field "u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-22pinctrl: renesas: Drop unused members from struct sh_pfc_pinctrlLad Prabhakar
Drop unused members from struct sh_pfc_pinctrl. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22pinctrl: renesas: r8a7795: Optimize pinctrl image size for R8A774E1Biju Das
This driver supports both RZ/G2H and R-Car H3 SoCs. Optimize pinctrl image size for RZ/G2H, when support for R-Car H3 (R8A7795) is not enabled Based on the similar patch on Linux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1Biju Das
This driver supports both RZ/G2N and R-Car M3-N SoCs. Optimize pinctrl image size for RZ/G2N, when support for R-Car M3-N (R8A77965) is not enabled. Based on the simialr patch on Linux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1Biju Das
This driver supports both RZ/G2M and R-Car M3-W/W+ SoCs. Optimize pinctrl image size for RZ/G2M, when support for R-Car M3-W/W+ (R8A7796[01]) is not enabled. Based on the similar patch on Linux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22pinctrl: renesas: r8a77951: Add R8A774E1 PFC supportBiju Das
Renesas RZ/G2H (r8a774e1) is pin compatible with R-Car H3 (r8a77951), however it doesn't have several automotive specific peripherals. Add a r8a77951 specific pin groups/functions along with common pin groups/functions for supporting both r8a77951 and r8a774e1 SoC. PFC changes are synced from mainline linux-5.9 commit bbf5c979011a ("Linux 5.9"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2020-11-22pinctrl: renesas: r8a77965: Add R8A774B1 PFC supportBiju Das
Renesas RZ/G2N (r8a774b1) is pin compatible with R-Car M3-N (r8a77965), however it doesn't have several automotive specific peripherals. Add a r8a77965 specific pin groups/functions along with common pin groups/functions for supporting both r8a77965 and r8a774b1 SoC. PFC changes are synced from mainline linux-5.9 commit bbf5c979011a ("Linux 5.9"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2020-11-21Merge tag 'efi-2021-01-rc3-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc3 (2) The parameter check for UEFI service GetNextVariableName() is corrected. The dependencies of CONFIG_DFU_TFTP are simplified. The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is corrected.
2020-11-21efi_loader: parameter check in GetNextVariableName()Heinrich Schuchardt
If GetNextVariableName() is called with a non-existing combination of VariableName and VendorGuid, return EFI_INVALID_PARAMETER. If GetNextVariableName() is called with a string that is not zero terminated, return EFI_INVALID_PARAMETER. Reformat a line over 80 characters. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-21efi_loader: tcg2 protocol updatesIlias Apalodimas
On pull reuqest https://lists.denx.de/pipermail/u-boot/2020-November/432735.html V4 of the patchset was sent instead of the v5. This is the v4->v5 missing diff Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-21dfu: simplify the dependencies of DFU_TFTPAKASHI Takahiro
Since CONFIG_UPDATE_COMMON always selects CONFIG_DFU_WRITE_ALT, we can drop the latter from dependencies of CONFIG_DFU_TFTP. Fixes: 3149e524fc1e ("common: update: add a generic interface for FIT image") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-20Merge tag 'xilinx-for-v2021.01-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.01-rc3 Microblaze: - Enable GC - Get rid of xparameters.h and switch to DT for CFI - Fix config file tpm: - Fix TPM code zynqmp: - Enable TPM by default - Remove unused macros fru: - Several fixes especially use limit for recording
2020-11-20fru: common: Record pcie/uuid fields in custom board areaMichal Simek
Add additional fields. They will be just recorded and filled but not shown. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: ops: Do not let parser to write data to not allocated spaceMichal Simek
If customs fields in board area are used it will likely go over allocated space in struct fru_board_data. That's why calculate limit of this structure to make sure that different data is not rewritten by accident. When limit is reached stop to record fields. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20fru: common: Switch capture variable with the restMichal Simek
capture variable is bool which is just one byte and it is just causing unaligned accesses. Better to have it as last entry in the structure. It also simplify offset calculation for initial header copy. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20arm64: zynqmp: Enable TPM for xilinx platformsMichal Simek
TPMs are becoming popular that's why enable drivers and command for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20arm64: zynqmp: Get rid of unused macrosMichal Simek
There is no reason to have these macros. But record offsets of missing register in the structure for future use. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20tpm: spi: Cleanup source codeMichal Simek
There is no need for GD to be used and priv variable is unused. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-20microblaze: Detect NOR flash based on DTMichal Simek
Remove fixed configuration and detect flash based on DT. Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors. Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Unify of setting for SPL_NOR/XIP supportMichal Simek
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with using SYS_FLASH_BASE are wrong because it is not aligned with DM. That's why change these macro and align them with TEXT_BASE macro. Information should be find at run time based on DT but implementation is not done yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Remove CONFIG_SYS_FDT_SIZEMichal Simek
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Simplify cache handlingMichal Simek
Enable caches by default. For now just simplify config file but it should be read from DT or PVRs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Clean config file from ifdef messMichal Simek
A lot of configs has been moved to Kconfig and it ends up in ifdef mess with no bodies. That's why remove all of them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Enable GCC garbage collector for full U-BootMichal Simek
GCC's garbage collector works for Microblaze for quite a long time but none has enabled it. The same change has be done for example by commit fac4790491f6 ("arc: Eliminate unused code and data with GCC's garbage collector"). Before: text data bss dec hex filename 588760 33592 39192 661544 a1828 u-boot After: text data bss dec hex filename 504504 32164 38608 575276 8c72c u-boot Which saves almost 15% of memory footprint. Also group symbols/functions to proper section. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19Merge branch '2020-11-18-assorted-fixes'Tom Rini
- Assorted SquashFS fixes and cleanups - Fixes for various Coverity issues - Various fixups to other platforms / code
2020-11-19fs/squashfs: implement exists() functionRichard Genoud
This permits to find a file and use the distro_bootcmd Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: remove buggy offset functionalityRichard Genoud
offset is the offset in the file read, not the offset in the destination buffer. If the offset is not null, this will lead to a memory corruption. So, for now, we are returning an error if the offset is used. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: don't write beyond buffer sizeRichard Genoud
The length of the buffer wasn't taken into account when writing to the given buffer. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_probe: use sqfs_decompressor_init() return valueRichard Genoud
sqfs_decompressor_init() returns a value, so it's better to use it than to force the return value to EINVAL (it could be ENOMEM) Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_probe: reset cur_dev/cur_part_info to NULL on errorRichard Genoud
Resetting the context on error will prevent some checks like: if (!ctx.cur_dev) To pass when the probe method has failed Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_probe: fix possible memory leak on errorRichard Genoud
If SquashFS magic number is invalid, there's a memory leak. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: fix memory leak on finfo.blk_sizesRichard Genoud
finfo.blk_sizes may not be freed in case of error in the for loop Setting it to null and freeing it at the end makes prevents that from happening. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_get_abs_path: fix possible memory leak on errorRichard Genoud
if sqfs_tokenize(rel_tokens, rc, rel); fails, the function exits without freeing the array base_tokens. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_get_abs_path: fix error checkRichard Genoud
the return value of sqfs_tokenize(rel_tokens, rc, rel); wasn't checked. (but "ret" value was !) This is obviouly a typo. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_frag_lookup: simplify error handlingRichard Genoud
For consistency with other functions. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: fix another memory leakRichard Genoud
data_buffer was allocated in a loop and freed only once. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: fix memory leakRichard Genoud
sqfs_closedir() should be called to free memory allocated by sqfs_opendir() Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: remove useless sqfs_closedir()Richard Genoud
as sqfs_opendir failed, there's no need to call sqfs_closedir Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read: fix dangling pointer dirs->entryRichard Genoud
dirs->entry shouldn't be left dangling as it could be freed twice. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_size: remove useless sqfs_closedir()Richard Genoud
as sqfs_opendir failed, there's no need to call sqfs_closedir Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_size: fix dangling pointer dirs->entryRichard Genoud
dirs->entry shouldn't be left dangling as it could be freed twice. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_concat_tokens: check if malloc succeedsRichard Genoud
memory allocation should always be checked Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read_inode_table: fix dangling pointerRichard Genoud
inode_table should not be left dangling as it may be freed in sqfs_opendir Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_search_dir: fix memory leaksRichard Genoud
path, target, res, rem and sym_tokens were not free on error nor success. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_search_dir: fix dangling pointerRichard Genoud
dirs->entry shouldn't be left dangling as it could be freed twice. Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_read_directory_table: fix memory leakRichard Genoud
pos_list wasn't freed on every error Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_split_path: fix memory leak and dangling pointersRichard Genoud
*file and *dir were not freed on error Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19fs/squashfs: sqfs_closedir: fix memory leakRichard Genoud
sqfs_dirs wasn't freed anywhere. Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-15 16:02:22 +0000