summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-10include/configs: ls1012aqds: add default environment variableBiwen Li
This adds default environment variable for ls1012aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10board/freescale/common: fix a bug that failed to read/write eeprom on ls1021atsnBiwen Li
Fix a bug that failed to read/write eeprom on ls1021atsn Signed-off-by: Biwen Li <biwen.li@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10pci: layerscape: fix a dead loop issueHou Zhiqiang
Fixes: commit 8ec619f8fd84 ("pci: layerscape: Fixup PCIe EP mode DT nodes for LX2160A rev2") This added the PCIe EP nodes fixup of LX2160A, but it didn't update the condition value when there isn't a property 'apio-wins'. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Fixed checkpatch error] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162aqds: enable eMMC HS400 mode supportYangbo Lu
Enable eMMC HS400 mode support on LX2162AQDS. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_RYangbo Lu
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card identification and configuration. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2162a: Enable OPTEE supportRuchika Gupta
Enable support to compile OPTEE driver, access AVB TA and RPMB API's access via RPC from OPTEE for lx2162 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10armv8: lx2162aqds: Add support for LX2162AQDS platformMeenakshi Aggarwal
This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10armv8: lx2162a: Add Soc changes to support LX2162AMeenakshi Aggarwal
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to KconfigMeenakshi Aggarwal
Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can be controlled via defconfig files. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10pci: ls_pcie_g4: Add size check for config resourceWasim Khan
resource "config" is required to have minimum 4KB space to access all config space of PCI Express EP. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10pci: layerscape: Add size check for config resourceWasim Khan
resource "config" is required to have minimum 8KB space as per hardware documentation. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls1028a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls1043a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls1012a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls1088a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls2080a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: ls1046a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10arm: dts: lx2160a: add label to pcie nodes in dtsWasim Khan
Add label to pcie nodes in dts so that these nodes are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10pci: ls_pcie_g4: Print pcie controller number starting from 1Wasim Khan
Print pcie controller number starting from 1 Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
2020-12-10pci: layerscape: Update print of pcie controllerWasim Khan
Print pcie controller number starting from 1 Signed-off-by: Wasim Khan <wasim.khan@nxp.com> [Trimmed subject] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4Wasim Khan
LX2160A-Rev1 uses PCIe layerscape Gen4 controller. Enable CONFIG_PCIE_LAYERSCAPE_GEN4 for lx2160a. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-09Merge tag 'u-boot-stm32-20201209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board - Update ARM STI and ARM STM STM32MP Arch maintainers emails - Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09ARM: dts: stm32: Add USB OTG ID pin on DH AV96Marek Vasut
Add USB OTG ID pin mux and switch the USB OTG port from peripheral to OTG mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09ARM: dts: stm32: Enable SDMMC3 on DH DRC02Marek Vasut
The DH DRC02 board has an on-board microSD slot, add DT properties to enable the slot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09ARM: dts: stm32: Disable SDMMC1 CKIN feedback clockMarek Vasut
The STM32MP1 DHCOM SoM can be built with either bus voltage level shifter or without one on the SDMMC1 interface. Because the SDMMC1 interface is limited to 50 MHz and hence SD high-speed anyway, disable the SD feedback clock to permit operation of the same U-Boot image on both SoM with and without voltage level shifter. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoMMarek Vasut
The default state of SD bus and clock line is logical HI. SD card IO is open-drain and pulls the bus lines LO. Always enable the SD bus pull ups to guarantee this behavior on DHCOM SoM. Note that on SoMs with SD bus voltage level shifter, the pull ups are built into the level shifter, however that has no negative impact. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-09.mailmap: map Patrick Delaunay and my email addressPatrice Chotard
Add our new email address dedicated for upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09treewide: Update email address Patrick Delaunay and Patrice ChotardPatrice Chotard
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09MAINTAINERS: Update ARM STI and ARM STM STM32MP Arch maintainers emailsPatrice Chotard
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09add check for ignored CONFIG_ENV_EXT4_DEVICE_AND_PART definitionManuel Reis
Check whether user has explicitly defined device and partition where environment file will be located before using 'auto' i.e. bootable partition Voids the need to set such partition as bootable to work with the 'dev:auto' tuple Signed-off-by: Manuel Reis <mluis.reis@gmail.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-12-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Espressobin: Simplify DT handling of board variants (Pali) - Add Luka Perkov to maintainers of Puzzle-M801 (Luka) - Armada 38x: Enable board specific USB2 high-speed impedance threshold configuration (Joshua)
2020-12-07configs: migrate CONFIG_IMX_THERMAL to defconfigsTom Rini
Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-07imx8mp_evk: README instruction fixesBaruch Siach
Use the full name of firmware self extracting file to make it run. Also, don't use sudo when not needed. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-12-07doc: board: imx8qm-rom7720-a1.rst: convert readme to reSTOliver Graute
Convert README to reStructuredText format. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-07arm: mvebu: Espressobin: Detect presence of emmc at runtimePali Rohár
Try to initialize emmc in board_late_init() and if it fails then we know that emmc device is not connected. This allows to use in U-Boot just one DTS file for all Espressobin variants and also to correctly set fdtfile env variable for Linux kernel. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Gérald Kerma <gerald@gk2.net> Reviewed-by: Andre Heider <a.heider@gmail.com>
2020-12-07arm: mvebu: Espressobin: Add support for emmc into dts filePali Rohár
To simplify setup, configuration and compilation of u-boot, define emmc node for all Espressobin boards. Espressobin boards without populated emmc works correctly, just detection and initialization of emmc obviously fails. Code for emmc is extracted from commit f1a43c84a960 ("arm64: dts: a3720: add support for espressobin with populated emmc"). Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Gérald Kerma <gerald@gk2.net>
2020-12-07Revert "arm64: dts: a3720: add support for espressobin with populated emmc"Pali Rohár
This reverts commit f1a43c84a960265309fa8365759de271a70c5a7e.
2020-12-07Revert "arm64: dts: armada-3720-espressobin: split common parts to .dtsi"Pali Rohár
This reverts commit 03bb6a9b1ed7085794c5f167307273d15c99d3f0.
2020-12-07arm: mvebu: a38x: Configurable USB2 high-speed impedance thresholdJoshua Scott
Hardware testing of a board using the Armada 385 has shown that an impedance threshold setting of 0x7 performs better in an eye-diagram test than with Marvell's recommended value 0x6. As other boards may still perform better with Marvell's reccomended value, a configuration option is added with a default value of 0x6. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-07arm: mvebu: puzzle-m801: Add a maintainerLuka Kovacic
Add Luka Perkov to Puzzle-M801 BOARD MAINTAINERS. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-06colibri-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8x: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-12-06apalis-imx8: add implementation for board_mem_get_layoutIgor Opaniuk
Add implementation of board_mem_get_layout for overriding the memory layout. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06imx8: allow overriding memory layoutMarcel Ziswiler
Introduce weak function board_mem_get_layout() which allows overriding the memory layout from board code in runtime, useful for handling different SKU versions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06doc: board: apalis-imx8x: add documentationIgor Opaniuk
This documents the u-boot build and deployment procedure. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06ARM: dts: fsl-imx8qxp-apalis: add initial device treeIgor Opaniuk
Introduce initial hierarchy of device trees for Apalis iMX8X System on Module. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06imx8m: fix cache setup for dynamic sdram sizeTim Harvey
the mem_map structure containing the size of SDRAM is used in various cache functions in cache_v8.c thus we need to update it with the sdram size the board is configured with as well. Without this the cache functions do not get setup properly and can hang in the case where a board reports more SDRAM than defined in PHYS_SDRAM_SIZE. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2020-12-06verdin-imx8mm: automatic ram size detectionMarcel Ziswiler
Implement board_phys_sdram_size() to automatically detect Verdin iMX8M Mini DualLite 1GB vs. Verdin iMX8M Mini Quad 2GB. Note: This only works if we keep using similar RAM chips! Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-06 15:06:48 +0000