| Age | Commit message (Collapse) | Author |
|---|
|
Without the '-undef' option, the 'linux' string in .env files is
replaced with the string '1 '.
For example, in the board/armadeus/opos6uldev/opos6uldev.env file,
kernelimg=opos6ul-linux.bin
becomes
kernelimg=opos6ul-1 .bin
in the include/generated/env.in file.
That's because 'linux' is a System-specific Predefined Macros. [1]
Pass the '-undef' option to fix this issue.
[1] https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Predefined-Macros.html
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
The "bootflow" command currently doesn't support scanning a single
partition. This is inconvenient in setups with multiple bootable
partitions within a single disk, but only one is desired.
Support scanning a single disk partition. Specifically, support the
syntax:
bootflow scan mmc1:4
which scans only mmc device 1, partition 4.
Signed-off-by: Nam Cao <namcao@linutronix.de>
|
|
This code assumes that CONFIG_MMC and it causes a build error when
the config is disabled.
aarch64-linux-gnu-ld.bfd: test/boot/bootstd_common.o: in function `bootstd_test_check_mmc_hunter':
test/boot/bootstd_common.c:83:(.text.bootstd_test_check_mmc_hunter+0x70):
undefined reference to `_u_boot_list_2_bootdev_hunter_2_mmc_bootdev_hunter'
Fixes: 66e3dce78750 ("bootstd: Allow hunting for a bootdev by label")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
The bootflow testing assumes that BOOTMETH_CROS is enabled but it
might not be which leads to a build error.
aarch64-linux-gnu-ld.bfd: test/boot/bootflow.o: in function `prep_mmc_bootdev':
test/boot/bootflow.c:549:(.text.prep_mmc_bootdev+0x1c8):
undefined reference to `_u_boot_list_2_driver_2_bootmeth_cros'
Fixes: d08db02d2d3d ("bootstd: Add a test for bootmeth_cros")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
While fat_exists() reports directories and files as existing
ext4fs_exists() only recognizes files. This lead to errors
when using systemd-boot with an ext4 file-system.
Change ext4fs_exists() to find any type of inode:
files, directories, symbolic links.
Fixes: a1596438a689 ("ext4fs ls load support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
It was only included by a single board which doesn't appear to have
ever used it for any default use cases so drop the filesystem now
that isn't used by any in-tree configurations.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
|
|
This is the only board that enables it, and looking generally I don't
believe it's used. All use cases I could fine for the board rub by
default off jffs on the nand and it doesn't enable USB storage.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: egnite GmbH <info@egnite.de>
|
|
The Broadcom Northstar 2 support was removed when the
bcm958712k board was removed but the target entry was
missed so clean that up as well.
Fixes: d59bc09d829 ("arm: Remove bcm958712k board")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
During address translation #address/size-cells props are expected to
apply to child nodes. However, devfdt_get_addr_index() incorrectly use
the parent offset of the udevice parent instead of getting the offset of
the node parent. This will work in most cases when there is only one
udevice tied to a node.
On e.g. an Orange Pi R1 Plus TLS board the dwc3-generic (parent) and
dwc3-generic-host (child) udevice is tied to the same node.
In that case both the offset and parent values end up being the same.
As a result, the #address/size-cells props intended for child nodes
incorrectly gets applied to the node itself resulting in wrong addr
being returned, 0x0 instead of 0xff600000.
The following can be seen on console:
dwc3-generic-host usb@ff600000: this is not a DesignWare USB3 DRD Core
dwc3-generic-host usb@ff600000: failed to initialize core
Fix this by using the offset of the parent node and not the offset to
the node the parent udevice is tied to.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
Pinconfig nodes normally bind recursively with PINCTRL_FULL and
PINCONF_RECURSIVE enabled. However, during U-Boot proper pre-relocation
any node marked with e.g. bootph-all will not bind unless its parent is
also marked for pre-reloc.
group1 {
pinconf1 {
bootph-all;
};
};
This cause the following warning message to be shown during U-Boot
proper pre-reloc stage on Rockchip devices, e.g on RK3568:
ns16550_serial serial@fe660000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
and on RK3328:
ns16550_serial serial@ff130000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
Check pinconfig nodes pre-reloc status recursively to fix this and to
make pinconfig_post_bind work same at both U-Boot proper pre-reloc and
at TPL/SPL stage.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
|
|
Don't define checksum algos when the underlying hashes are not enabled.
This allows disabling these hashes in SPL (or U-Boot).
Fixes: d16b38f4270 ("Add support for SHA384 and SHA512")
Fixes: 646257d1f40 ("rsa: add sha256-rsa2048 algorithm")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
|
|
FDT functions is not working when OF_LIVE is enabled.
Convert fdt parsing functions to ofnode parsing functions
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
|
|
When `gd` is relocated during `spl_relocate_stack_gd()` the
doubly-linked circular list in the `log_head` member is broken.
The last element of the list should point back to the initial
`list_head`, but as the initial `list_head` is moved the pointer becomes
stale. As a result the loop in `log_dispatch` would never finish.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
|
|
Usage of common.h is deprecated.
* Remove common.h from RNG drivers.
* Sort includes.
* Add time.h to sandbox driver.
* Add linux/types.h to rng.h to provide size_t.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
The common.h should not be used anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Not all flows have a device and the function already contains logic to
handle this case.
Fixes: eccb25cd5922 ("bootstd: Allow the bootdev to be optional in bootflows")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
|
|
In gsub, when the destination string is empty, the string 't' is
provided and the regular expression doesn't match, then the final result
is an empty string.
Example:
=> echo ${foo}
=> setenv foo
=> setexpr foo gsub e a bar
=> echo ${foo}
=>
The variable ${foo} should contain "bar" and the lack of match shouldn't
be considered an error.
This patch fixes the erroneous behavior by removing the return
statement and breaking out of the loop in case of lack of match.
Also add a test for the no match case.
Signed-off-by: Massimiliano Minella <massimiliano.minella@se.com>
|
|
The FWU Multi Bank Update feature allows the platform to boot the
firmware images from one of the partitions(banks).
On the Developerbox, SCP-firmware running on the SCB(Cortex-M3)
passes the value of the boot index on the NOR flash.
Add a function to read the boot index value from the NOR flash.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
|
|
The actual driver does not work when there is no linked PHY. These
changes add support for fixed-link feature in the device tree.
Signed-off-by: BELOUARGA Mohamed <m.belouarga@technologyandstrategy.com>
|
|
Prevent the error messages produced by which(1), such as the one quoted
below, from being visible in the build outputs.
which: no dtc in (./scripts/dtc)
This makes the build outputs look a tiny bit cleaner.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
|
|
This patch fixes Smatch static checker warning:
test/cmd/mbr.c:243 mbr_test_run()
warn: sizeof(NUMBER)?
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alexander Gendin <agendin@matrox.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
QEMU's -m option can take fractional megabyte values,
and lowest granularity seems to be 0x2000.
For example, run qemu with amount of memory set to 100005k (0x61A9400):
$ qemu-system-arm -machine virt -cpu cortex-a15 -m 100005k \
-bios denx/u-boot.bin -nographic
=> fdt addr $fdt_addr
=> fdt print /memory@40000000
memory@40000000 {
reg = <0x00000000 0x40000000 0x00000000 0x061aa000>;
device_type = "memory";
};
When LPAE is enabled, 1:1 mapping is created using 2 MB blocks.
In case amount of memory provided to QEMU is not multiple
of 2 MB, hang occurs during MMU initialization.
How to reproduce:
qemu-system-arm -machine virt -m 1058 -nographic -bios u-boot.bin - boots
qemu-system-arm -machine virt -m 1057 -nographic -bios u-boot.bin - hangs
DRAM: 1 GiB
initcall: 60011df8
initcall: 60011904
New Stack Pointer is: 80fffe90
initcall: 60011a20
initcall: 60011bcc
initcall: 60011bd4
initcall: 600119b4
Relocation Offset is: 22042000
Relocating to 82042000, new gd at 81001ed0, sp at 80fffe90
initcall: 60011b8c
initcall: 82053ea0
initcall: 82053ea8
initcall: 60012040 (relocated to 82054040)
dram_bank_mmu_setup: bank: 0
- hang here during mmu init -
This patches rounds down to the nearest multiple of 2MB when
CONFIG_ARMV7_LPAE=y.
Fixes: 3fa914af82("arm: qemu: implement enable_caches()")
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
The header (NSIH) used for the s5p4418-SoC is not loaded into RAM by the
2nd-bootloader, see boot0.h. Therefore, use an adapted version of
relocate_vectors which relocates the vectors after the header (at _start)
instead of the 'dummy'-vectors at the start of the header (at
__image_copy_start).
Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
ARCH_NEXELL: Change calculation of monitor length (gd->mon_len) to fix
relocation at boards with s5p4418-SoC (ARCH_NEXELL). At s5p4418, _start
is after the header (NSIH). Therefore the monitor length has to be
calculated using __image_copy_start instead of _start in order the
whole monitor code is relocated.
Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
|
|
When run `virtio scan` on i.MX95, there is abort when accessing virtio
mmio region. The issue is the mmio region is not mapped. So let's map
all virtio mmio regions.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Currently, if boot with extlinux.conf and do not set the fdt
U-Boot will provide its own device tree. This behavior is
beneficial if the U-Boot device tree is in sync with Linux,
but it totally halts the booting of pre-dtb kernels (3.4 for
example) since it uses ATAGs. To fix this, pass `-` in the
fdt extlinux field as a signal that no tree should be used.
Suggested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
This patch add XGMII support for connecting 2.5G PHY.
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
|
|
User can assign a specific MDC speed to the eth node as follow:
ð {
...
phy-mode = "usxgmii";
phy-handle = <&phy8>;
mdio {
clock-frequency = <10500000>;
};
phy8: eth-phy@8 {
compatible = "ethernet-phy-id31c3.1c12";
...
};
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
|
|
Set SD pin driving to 4mA
Signed-off-by: Dong Huang <dong.huang@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
|
|
Add THRU0-3 and SIOPBI/SIOPBO pin groups/functions.
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
|
|
- Reworks Qualcomm support to be more generic, dropping board specific
build targets and relying on DT as the only source of truth
- Switches all Qualcomm devices to use upstream devicetree
|
|
When U-Boot as running as the first stage bootloader on MSM8916 devices,
early debug UART requires turning on the clocks (for some reason the
pre-loader turns them off?!).
To simplify developing for this platform, allow the
apq8016_clk_init_uart() function to be called externally. Developers can
call this from the serial_msm debug uart driver to configure the clocks
before the driver model is available.
As it is only possible to enable early debug UART in custom builds of
U-Boot, this solution at least gives developers the option.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add drivers and DTS files, as well as regex matches for
qcom/qualcomm/snapdragon.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Drop the U-Boot specific DTS in favour of upstream. We'll only include
the -4000 variant as that is what U-Boot already supported.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the headers needed for QCS404-evb.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Drop the U-Boot specific dragonboard820c.dts file in favour of the
upstream apq8096-db820c.dts and an additional -u-boot.dtsi with the
U-Boot specific additions.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Don't use hardcoded clock IDs, use the IDs from the dt-bindings to be
compatible with upstream.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import PM8994 and PMI8994 DTSI files in preparation for switching
MSM8996 boards to upstream DTS.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import dt-binding headers for MSM8996/APQ8096 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
support.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the supporting pm8916.dtsi and msm8916-pm8916.dtsi files from
upstream in preparation for switching boards over.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the dt-bindings headers in preparation for switching to upstream
DTS for MSM8916.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import sdm845.dtsi from upstream, as well as the upstream DTS files for
the db845c and Samsung starqltechn. Delete the old board files.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the PM8998 and PMI8998 PMIC DTSI files from Linux as well
as the common audio codec in preperation for replacing board DTS files
with upstream.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the DT bindings headers that are used by SDM845 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The MSM8916/APQ8016 Technical Reference Manual is publicly available and
contains a lot of useful register maps for many core parts of the SoC.
Include an archive.org link to it in the dragonboard410c documentation.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Replace the board specific docs with a generic board.rst file which
documents the build/boot process for the sdm845 and qcs404 boards now
that the only differences are the DTB in use.
At the same time, create a debugging page to document some useful
snippets and tips for working with Qualcomm platforms.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.
With this, the board specific defconfig is also no longer needed, so
drop it as well.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
On Qualcomm platforms, the TZ may already have certain memory regions
under protection by the time U-Boot starts. There is a rare case on some
platforms where the prefetcher might speculatively access one of these
regions resulting in a board crash (TZ traps and then resets the board).
We shouldn't be accessing these regions from within U-Boot anyway, so
let's mark them all with PTE_TYPE_FAULT to prevent any speculative
access and correctly trap in EL1 rather than EL3.
Some lower level FDT functions are used here relying on some assumptions
about how Qualcomm devicetrees are laid out (#address/size-cells being 2
for reserved-memory), as this is the only way to make this acceptably
fast enough with dcache off. The full fat implementation takes 1800ms on
SDM845, the implementation in this patch takes <1.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
