| Age | Commit message (Collapse) | Author |
|---|
|
Now that we have the same option for SPL and TPL, simplify the logic for
determining the initial stack.
Note that this changes behaviour as current SPL_STACK is a fallback for
TPL. However, that was likely unintended and can be handled with Kconfig
defaults if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Tom Rini <trini@konsulko.com>
|
|
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
|
|
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/24876
- Convert imx6q-lxr and imxrt1050 to OF_UPSTREAM.
- Fix potential memory leak on ]imx/imx8/imx8m]image.
- Restrict DDR_SI_TEST to only Siemens Capricorn board.
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD on Data Modul and DH imx8m boards.
|
|
The imx6q-lxr devicetree has landed in kernel 6.13.
Switch to OF_UPSTREAM to make use of the upstream devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
|
|
Move content of dh_imx6_defconfig into dh_imx6.config. Retain legacy
dh_imx6_defconfig as multi-config for all DH i.MX6 DHSOM based boards.
Introduce separate imx6_dhcom_drc02_defconfig, imx6_dhcom_pdk2_defconfig
and imx6_dhcom_picoitx_defconfig for each i.MX6 DHSOM based board, to
make build for those boards easier. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8mp_dhsom.config .
Fixes: 940135eea5df ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
eDM SBC
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8m_data_modul.config .
Fixes: 940135eea5df ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
eDM SBC
The environment is missing quotes for string variable, add them.
Fixes: 940135eea5df ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8mimage.c:187
by calling function 'getline' and lost at imx8mimage.c:210.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
|
|
Dynamic memory, referenced by 'line', is allocated at imx8image.c:270
by calling function 'getline' and lost at imx8image.c:294.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
|
|
Dynamic memory, referenced by 'line', is allocated at imximage.c:761
by calling function 'getline' and lost at imximage.c:793.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
|
|
The DDR_SI_TEST config option is only relevant to the i.MX8 Capricorn
board.
Make DDR_SI_TEST depend on DDR_SI_TEST so that it does not show up
on other targets.
Signed-off-by: Liya Huang <1425075683@qq.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
|
|
The device tree for imxrt1050 is now
available in the /dts/upstream directory.
Migrate board to use OF_UPSTREAM.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
into next
bbmiiphy clean up and DM alignment, finally gets rid of the static
bbmiiphy variables and plugs bbmiiphy into MDIO framework.
|
|
Neither bb_miiphy_buses nor bb_miiphy_buses_num are used anymore.
Drop both of them.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Instead of doing another lookup, trivially access the struct mii_dev
embedded in struct bb_miiphy_bus . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
The struct bb_miiphy_bus embeds struct struct mii_dev, which
already contains one copy of name field. Drop the duplicate
top level copy of name field.
The a38x code does static assignment of disparate names, use
snprintf(...) to fill in matching name in probe to avoid any
breakage.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Replace the name based look up in bb_miiphy_getbus() with trivial
container_of() call. This works because the struct bb_miiphy_bus
always embeds the matching struct mii_dev . This also makes the
code much simpler and more efficient.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
callbacks
Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
currently listed in bb_miiphy_buses[] array. This is a temporary
duplication of assignment to avoid breakage, which will be removed
in follow up patches. At this point, the bb_miiphy callbacks can
reach these accessors by doing container_of() on struct mii_dev.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
currently listed in bb_miiphy_buses[] array. This is a temporary
duplication of assignment to avoid breakage, which will be removed
in follow up patches. At this point, the bb_miiphy callbacks can
reach these accessors by doing container_of() on struct mii_dev.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
currently listed in bb_miiphy_buses[] array. This is a temporary
duplication of assignment to avoid breakage, which will be removed
in follow up patches. At this point, the bb_miiphy callbacks can
reach these accessors by doing container_of() on struct mii_dev.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
callbacks
Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
currently listed in bb_miiphy_buses[] array. This is a temporary
duplication of assignment to avoid breakage, which will be removed
in follow up patches. At this point, the bb_miiphy callbacks can
reach these accessors by doing container_of() on struct mii_dev.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Introduce bb_miiphy_alloc()/bb_miiphy_free() wrappers to allocate and free
struct bb_miiphy_bus. Make struct bb_miiphy_bus wrap struct mii_dev, which
will become useful later in bb_miiphy_bus accessors, which would be able
to access struct bb_miiphy_bus using container_of, even if the PHY stack
only passes in the inner struct mii_dev .
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Introduce mdio_init() split off from mdio_alloc(), which is used
to initialize already allocated struct mii_dev.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Pull the bbmiiphy initialization code from designware_eth_probe() into
dedicated function, dw_bb_mdio_init(), just like all the other MDIO
initialization functions.
Keep check for "snps,bitbang-mii" in the designware_eth_probe(), so the
driver can initialize this MDIO only in case the property is present,
and initialize regular DW MDIO in case it is not present.
The dw_bb_mdio_init() allocates its own MDIO instance, because thus far
code gated behind "snps,bitbang-mii" did depend on allocation of MDIO bus
by the other two MDIO bus options and then rewrote the newly allocated
MDIO bus callbacks, which is wrong, instead allocate proper MDIO bus with
the correct callbacks outright.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
There is literally one single bbmiiphy bus in this driver,
remove the bus index handling.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
The .init callback is not called by any function, drop it.
There are no more users of the init callback, drop the entire
mechanism.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
All the resources needed by this .init callback should already
be available by the time probe function runs, simply call the
init callback directly and set the bb_miiphy init callback to
NULL. This shouldn't break anything on this hardware, but would
be nice if someone could double-check and test that.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Move the bb_miiphy functions before MDIO registration. This is a
preparatory patch, the functions will be referenced around the MDIO
registration in the follow up patches. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Move the bb_miiphy functions before MDIO registration. This is a
preparatory patch, the functions will be referenced around the MDIO
registration in the follow up patches. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Move the bb_miiphy functions before MDIO registration. This is a
preparatory patch, the functions will be referenced around the MDIO
registration in the follow up patches. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
|
|
Move the bb_miiphy functions before MDIO registration. This is a
preparatory patch, the functions will be referenced around the MDIO
registration in the follow up patches. No functional change.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
This is unnecessary, the unset structure member is initialized to
NULL by default, drop the assignment.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The init function does nothing, the bb_miiphy_init() already checks
whether the .init callback is assigned, and if not, skips calling it.
Remove the empty init function. The entire init callback will be
removed in follow up patches.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The init function does nothing, the bb_miiphy_init() already checks
whether the .init callback is assigned, and if not, skips calling it.
Remove the empty init function. The entire init callback will be
removed in follow up patches.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Anurag Dutta <a-dutta@ti.com> says:
Previously saved environment introduce discrepancies and may lead to
incompatibilities without default settings. This series removes the saved
environment functionality on am57xx evms so that the default configuration
is always loaded
Test result: https://gist.github.com/anuragdutta731/b253ddb0a5538ab6588a3535d7bbecf7
Link: https://lore.kernel.org/r/20250208043938.52832-1-a-dutta@ti.com
|
|
Saved environments lead to inconsistencies leading to conflicts
with the default environment that U-boot should update during
development. Remove the previously saved environment so that
the default environment is always loaded.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
|
|
Saved environments cause inconsistencies leading to conflicts
with the default environment that U-boot should update during
development. Remove the previously saved environment so that
the default environment is always loaded.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/24816
Please pull the SoCFPGA changes for next from u-boot-socfpga, containing
boot support for the Altera SoCFPGA Agilex 5 platform in U-Boot. The
changes include:
1. Board-specific configurations and setup required to enable Agilex 5
operation in U-Boot.
2. Integration of cache coherency unit (CCU) initialization routine,
including CCU conguration in DT.
3. Clock, firewall (configured in DT), SMMU, low level initialization
specific to Agilex 5.
4. Integration of memory initialization routine, including DDR setup.
This patch set has been tested on Agilex 5 devkit with QSPI boot
(UBI/UBIFS) and RAM boot (TFTP & ARM DS debugger).
|
|
Automatically start watchdog timer for Agilex5. This
configuration is enabled by default in the Kconfig,
hence removing this configuration from Agilex5 defconfig.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Add the required configuration in the U-Boot env to enable Linux QSPI
boot with UBI / UBIFS.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Add board_boot_order() to retrieve the list of boot devices from
spl-boot-order property in device tree. This board_boot_order()
would be used for all Intel SOC64 devices.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Enable XGMAC for SoCFPGA Agilex5 devkit.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Use default common ARMv8 linker script instead of a separate
SoC64 linker script
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
|
|
Introduce a new symbol in the beginning of .data section in
the common ARMv8 linker script and use that as a reference
for data save and restore.
Previously, the code would rely on calculating the start of
the .data section address via data size, however, we observed
that the data size does not really reflect the SPL mapped
addresses.
In our case, the binman_sym section size was not included in
the data size, which will result in a wrong address for the
.data start section, which prevents us from properly saving
and restoring SPL data.
This approach skips the calculation for the starting address
of the .data section, and instead just defines the beginning
address of the .data section and calling the symbol as needed,
in which we think as a simpler and much more robust method.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Add SPL support for Agilex5 SoCFPGA.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
|
|
Adding DDR driver support for Agilex5 series.
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
|
