u-boot-toradex.git - U-Boot bootloader for Apalis and Colibri modules

Age	Commit message (Collapse)	Author
2021-01-23	arm: dart6ul: enable DM_ETH for the dart6ul	Marc Ferland
	This patch converts the dart6ul ethernet support to DM_ETH and cleans up the legacy ethernet code. The clean up, more specifically: * moves the fec2 node and pin definition to the carrier board DTS since the phy associated with it is on the carrier board and not on the SoM; * add the reset pin associated to each phy; * separate the ethernet, mdio and reset pins of each fec so that they are easier to reference; * add clock properties to the phy nodes since they are connected to the 50Mhz ENET[12]_TX_CLK clock of the SoC; * remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
2019-04-25	imx: Add variscite DART-6UL Evaluation Kit	Parthiban Nallathambi
	Port for the DART-6UL Evaluation Kit SBC. Based on the variscite DART-6UL iMX6ULL SoM. CPU: Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: Variscite DART-6UL Evaluation Kit Board: Variscite DART-6UL Evaluation Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2c - MMC/SD - eMMC - USB host - UART 1 Note: LCDIF porting needs DM_VIDEO https://lists.denx.de/pipermail/u-boot/2019-April/365506.html Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>