summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
AgeCommit message (Collapse)Author
2021-06-09mx7d: Add Storopack's SMEGW01 boardFabio Estevam
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09imx: Add SeeedStudio NPI-IMX6ULL SupportNavin Sankar Velliangiri
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09imx: support for conga-QMX8 boardOliver Graute
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09arm: imx: imx8mm: correct unrecognized fracpll frequencyAndrey Zhizhikin
Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ() macro, which expands the value provided to the Hz range without taking into account the precise Hz setting. This causes the frequency of 266 MHz not ot be found in the imx8mm_fracpll_tbl, since it is entered there with a precise Hz value. This in turn causes the boot hang in SPL, as proper DDR fracpll frequency cannot be determined. Correct the value in imx8mm_fracpll_tbl to match the one expanded by MHZ(266) macro, rounding it down to MHz range only. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09arm: imx: imx8mm: clock: make debug output more descriptiveAndrey Zhizhikin
Clock initialization functionality has ambitious debug messages, which are printed out when failures are triggered during execution: - Separate frequency table lookup functions have the the same output that makes it impossible to understand which function failed and produced the output - PLL decoding routine has a generic debug statement printed, which does not state the actual value failed to be found Extend the output for both cases with prefixing table lookup functions output with function name, and report the failed value in PLL decoding routine. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09Add out4.ru O4-iMX-NANO boardOleh Kravchenko
Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev()Giulio Benetti
We need those macros to instruct drivers on how to behave for SoC specific quirks, so let's add it as done for other i.MX SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09arm: imxrt: soc: make mpu regions genericGiulio Benetti
This mpu handling works for every i.MXRT SoC that we have, so let's generalize imxrt1050_region_config to imxrt_region_config. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-05-24ARM: imx8m: fix imx_eqos_txclk_set_rate() type mismatch for LTOMarek Behún
When building imx8mp_evk_defconfig with LTO, the compiler complains about type mismatch of function imx_eqos_txclk_set_rate() in file drivers/net/dwc_eth_qos.c:845:12 which contains a weak definition of this function, vs file arch/arm/mach-imx/imx8m/clock_imx8mm.c which contains an implementation. Change the type of this function in the implementation to fix this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24ARM: make gd a function call for LTO and set via set_gd()Marek Behún
On ARM, the gd pointer is stored in registers r9 / x18. For this the -ffixed-r9 / -ffixed-x18 flag is used when compiling, but using global register variables causes errors when building with LTO, and these errors are very difficult to overcome. Richard Biener says [1]: Note that global register vars shouldn't be used with LTO and if they are restricted to just a few compilation units the recommended fix is to build those CUs without -flto. We cannot do this for U-Boot since all CUs use -ffixed-reg flag. It seems that with LTO we could in fact store the gd pointer differently and gain performance or size benefit by allowing the compiler to use r9 / x18. But this would need more work. So for now, when building with LTO, go the clang way, and instead of declaring gd a global register variable, we make it a function call via macro. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68384 Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-02ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CMIlko Iliev
Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02imx: Add support for Ronetix's iMX7-CM boardIlko Iliev
Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02imx: mkimage_fit_atf: fix file size reportingTim Harvey
instead using ls and awk to determine file size use stat instead. This fixes an invalid size reporting for user or group names that have spaces in them. This adds a dependency on the stat application which is part of the coreutils package which also includes ls. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)Ying-Chun Liu (PaulLiu)
Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-10arm: Remove mx6dlarm2 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove cgtqmx6eval boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove titanium boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove ts4800 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove mx53evk boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove pfla02 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove zc5202 and zc5601 boardsTom Rini
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove xpress boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove platinum_picon boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove secomx6quq7 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove ts4600 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove sc_sps_1 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove SANSA_FUZE_PLUS boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove xfi3 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove ot1200 boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. In order to convert to using the DWC SATA driver under DM further migrations are required. Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10arm: Remove dms-ba16 boardTom Rini
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Akshay Bhat <akshaybhat@timesys.com> Cc: Ken Lin <Ken.Lin@advantech.com.tw> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-08imx: bootaux fix elf loadingMax Krummenacher
This reverts the arch/arm/mach-imx/imx_bootaux.c changes of commit 805b3cac1e0c. The loader function name was changed so that it does not clash with the generically available function in lib/elf.c. imx-bootaux loads an elf file linked for an auxilary core. Thus the loader function requires address translation from the auxilary core's address space to where those are mapped into U-Boot's address space. So the elf loader is specific and must not be replaced with a generic loader which doesn't provide the address translation functionality. Fixes commit 805b3cac1e0c ("lib: elf: Move the generic elf loading/validating functions to lib") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-08ARM: imx: Add OCRAM_S into iMX8M MMU tablesMarek Vasut
The OCRAM_S is regular memory, just like the OCRAM, add it to the MMU tables so it can be used and cached. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-04-08imx8mp-evk: switch to use binmanPeng Fan
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn-evk: switch to use binmanPeng Fan
Use binman to pack images. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn-ddr4-evk: switch to use binmanPeng Fan
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mm_evk: switch to use binman to pack imagesPeng Fan
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8: Add DEK blob encapsulationClement Faure
Add DEK encapsulation support for imx8. The DEK blob is generated by the SECO through the SCFW API. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: Add DEK blob encapsulation for imx8mClement Faure
Add DEK blob encapsulation support for IMX8M through "dek_blob" command. On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob for encrypted boot. The DEK blob is encapsulated by OP-TEE through a trusted application call. U-boot sends and receives the DEK and the DEK blob binaries through OP-TEE dynamic shared memory. To enable the DEK blob encapsulation, add to the defconfig: CONFIG_SECURE_BOOT=y CONFIG_FAT_WRITE=y CONFIG_CMD_DEKBLOB=y Signed-off-by: Clement Faure <clement.faure@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR ↵Clement Le Marquis
register to 0x3 It is highly recommended to set the PRIBLOB bitfield to 0x3 once your encrypted boot image has booted up, this prevents the generation of new blobs that can be used to decrypt an encrypted boot image. The PRIBLOB is a sticky type bit and cannot be changed until the next power on reset. Add the set_priblob_bitfield U-Boot command to prevent the generation of new blobs. Signed-off-by: Clement Le Marquis <clement.lemarquis@nxp.com> Acked-by: Ye Li <Ye.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08crypto: caam: Add CAAM support to i.MX8M platformsAymen Sghaier
This patch enable CAAM support for i.MX8M platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08caam: enable support for iMX7ULPFranck LENORMAND
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: cmd_dek: Enable DEK only for chips supporting CAAMYe Li
Since cmd_dek is using CAAM JR, so enable the CMD_DEK only when HAS_CAAM is set Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08iMX8M: Add support to enable CONFIG_IMX_HABYe Li
Add some SOC level codes and build configurations to use HAB lib for CONFIG_IMX_HAB (secure boot), like adding the SEC_CONFIG fuse, enable fuse driver, CAAM clock function, and add CAAM secure RAM to MMU table. The FSL_CAAM is temporally not enabled for iMX8M when CONFIG_IMX_HAB is set, because we don't need the CAAM driver for SPL. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Fix build warnings in 32-bit targetsBreno Lima
When building 32-bit targets with CONFIG_SECURE_BOOT and DEBUG enabled the following warnings are displayed: arch/arm/mach-imx/hab.c:840:41: warning: format '%lx' expects argument \ of type 'long unsigned int', but argument 3 has type 'uint32_t \ {aka unsigned int}' [-Wformat=] printf("HAB check target 0x%08x-0x%08lx fail\n", ~~~~^ %08x ddr_start, ddr_start + bytes); arch/arm/mach-imx/hab.c:845:45: warning: format '%x' expects argument \ of type 'unsigned int', but argument 3 has type 'ulong \ {aka long unsigned int}' [-Wformat=] printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr); ~^ %lx Fix warnings by providing the correct data type. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08mx7ulp: hab: Add hab_status command for HABv4 M4 bootBreno Lima
When booting in low power or dual boot modes the M4 binary is authenticated by the M4 ROM code. Add an option in hab_status command so users can retrieve M4 HAB failure and warning events. => hab_status m4 Secure boot disabled HAB Configuration: 0xf0, HAB State: 0x66 No HAB Events Found! Add command documentation in mx6_mx7_secure_boot.txt guide. As HAB M4 API cannot be called from A7 core the code is parsing the M4 HAB persistent memory region. The HAB persistent memory stores HAB events, public keys and others HAB related information. The HAB persistent memory region addresses and sizes can be found in AN12263 "HABv4 RVT Guidelines and Recommendations". Reviewed-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Check if IVT header is HABv4Breno Lima
The HABv4 implementation in ROM checks if HAB major version in IVT header is 4.x. The current implementation in hab.c code is only validating HAB v4.0 and HAB v4.1 and may be incompatible with newer HABv4 versions. Modify verify_ivt_header() function to align with HABv4 implementation in ROM code. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Display All HAB events via hab_status commandUtkarsh Gupta
Add ability for hab_status command to show All HAB events and not just HAB failure events Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Enable hab.c to authenticate additional images in open configurationBreno Lima
Currently it's not possible to authenticate additional boot images in HAB open configuration. The hab.c code is checking if the SEC_CONFIG[1] fuse is programmed prior to calling the hab_authenticate_image() API function. Users cannot check if their additional boot images has been correctly signed prior to closing their device. Enable hab.c to authenticate additional boot images in open mode so HAB events can be retrieved through get_hab_status() function. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-20 05:41:42 +0000