summaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32mp
AgeCommit message (Collapse)Author
2022-09-06stm32mp: simplify the STM32MP15x package parsing codePatrick Delaunay
Simplify the package parsing code for STM32MP15X as package can be affected with get_cpu_package() result. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12stm32mp: add support of STM32MP13x Rev.YPatrick Delaunay
Add support of STM32MP13x Rev.Y for the Silicon revision REV_ID = 0x1003. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-20Merge branch 'master' into nextTom Rini
Merge in v2022.07-rc5.
2022-06-17stm32mp: stpmic1: remove the debug unit request by debuggerPatrick Delaunay
Depending on backup register value, U-Boot SPL maintains the debug unit powered-on for debugging purpose; only BUCK1 is required for powering the debug unit, so revert the setting for all the other power lanes, except BUCK3 that has to be always on. To be functional this patch requires a modification in the debugger ,openocd for example, to update the STM32MP15 backup register when it is required to debug SPL after reset. After deeper analysis this behavior will be never supported in tools so the associated code, will be never used and the associated code can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17stm32mp: fdt: update etzpc for STM32MP13xPatrick Delaunay
Add support of STM32MP13x the ETZPC part of fdt.c Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Change-Id: If2777fbf66b8525a2a447056780aaa04e6b0a9a0
2022-06-17stm32mp: fdt: update etzpc for STM32MP15xPatrick Delaunay
Introduce STM32MP15 function and defines to prepare the STM32MP13 introduction. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Change-Id: I909b205e73dcf207e0216aae5905c3c52472020e
2022-06-17arm: stm32mp: support 2 MAC address for STM32MP13Patrick Delaunay
Add support of several MAC address in OTP (3 32bits OTP word for 2 MAC address) for SOCs in STM32MP13x family: STM32MP133 and STM32MP135. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: add support of STM32MP13xPatrick Delaunay
Introduce the code in mach-stm32mp and the configuration file stm32mp13_defconfig for the new STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: add CONFIG_STM32MP15_PWRPatrick Delaunay
Add config CONFIG_STM32MP15_PWR to handle the access to regulators managed by the PWR driver defined in pwr_regulator.c This driver is only used in U-Boot by STM32MP15x family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: add sub config Kconfig.15xPatrick Delaunay
Add sub Kconfig for each SOC in the STM32 CPU family. It is a preliminary step to introduce a new SOC in the STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: add choice for STM32MP SOC familyPatrick Delaunay
Add mandatory choice for SOC support in ARCH_STM32MP. This patch is a preliminary step for new SOC introduction in STM32MP family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: move code for STM32MP15xPatrick Delaunay
Move code and defines only needed for CONFIG_STM32MP15x in stm32mp15x.c when low level init without TFABOOT is supported. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17arm: stm32mp: move the get_otp helper function in bsecPatrick Delaunay
As the get_otp() helper function in bsec are common for all STM32MP family, move this function in bsec driver Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17configs: stm32mp1: move SUPPORT_SPL in STM32MP15xPatrick Delaunay
The SPL is only supported by STM32MP15x not by all the SOC with STM32MP arch. Only TFABOOT is supported in next products. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-06-17stm32mp: stm32prog: fix the last character of dfu_alt_add third parameterPatrick Delaunay
The third parameter of dfu_alt_add(), the string description of alternate, is build in stm32prog_alt_add() with a unnecessary character ';' at the end of the string. This separator was required in the first implementation of dfu_alt_add() but is no more needed in the current implementation; this separator is managed only in dfu_config_interfaces() which call dfu_alt_add() for this parameter without this separator. And since the commit 53b406369e9d ("DFU: Check the number of arguments and argument string strictly"), this added character cause an error when the stm32prog command is executed because the third parameter of dfu_alt_add() must be a string with a numerical value; 's' must be NULL in the result of call in dfu_fill_entity_mmc(): third_arg = simple_strtoul(argv[2], &s, 0); Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: psci: Retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspendMarek Vasut
The SoC seems to lose the values of MCUDIVR, PLL3CR, PLL4CR, RCC_MSSCKSELR during suspend/resume cycle, cache them and reinstate their values on resume. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10ARM: stm32mp: correctly handle Silicon revisionPatrick Delaunay
Handle correctly the silicon revision = REV_ID[15:0] of Device Version and the associated device marking, A to Z on STMicroelectronics STM32MP SOCs. This patch prepare the introduction of next STM32MP family, with STM32MP13x Rev.Z for REV_ID = 1.1. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10ARM: stm32mp: skip ft_system_setup when the soc node is absentPatrick Delaunay
The function ft_system_setup shouldn't return an error when the /soc node is absent in the provided device tree but just skip the updates. This patch solves an issue when the U-Boot pytest is executed on board. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: handle flashlayout without STM32 image headerPatrick Delaunay
Accept flashlayout without header in alternate 0, to simplify the support of stm32prog command with dfu-util. By default the flashlayout file size is the size of the received binary, provided with the offset in the DFU alternate. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: handle U-Boot script in flashlayout alternatePatrick Delaunay
Update the stm32prog command to allow the reception of U-Boot script in the FlashLayout alternate during the first USB enumeration. This patch is aligned with the last TF-A behavior: the Flashlayout is now loaded by U-Boot; it is no more present at STM32_DDR_BASE when the stm32prog is launched after a serial boot, on UART or on USB. The received script must be a U-Boot legacy image, no more need to add a stm32image header. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: handle interruption during the first enumerationPatrick Delaunay
When an interruption is received during the first USB enumeration used to received the FlashLayout, with handle ctrl-c, the second enumeration is not needed and the result for stm32prog_usb_loop is false (reset is not needed). This patch avoids the need of a second ctrl to interrupt the command stm32prog. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: add support of UUID for FIP partitionPatrick Delaunay
Add support of UUID for FIP parttion, required by Firmware update support in TF-A: - UUID TYPE for FIP partition: 19d5df83-11b0-457b-be2c-7559c13142a5 - "fip-a" partition UUID: 4fd84c93-54ef-463f-a7ef-ae25ff887087 - "fip-b" partition UUID: 09c54952-d5bf-45af-acee-335303766fb3 This check is done with a new partition type "FIP" associated at the FIP UUID. The A/B partition UUID is detected by the partition name: "fip-a", "fip-b". Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: add support of STM32IMAGE version 2Patrick Delaunay
Add support of new header for the STM32IMAGE version V2 in command stm32prog command for STM32MP13x family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: add TEE support in stm32prog commandPatrick Delaunay
When OP-TEE is used, the SMC for BSEC management are not available and the PTA provisioning for OTP must be used. U-Boot opens the session to this PTA and use it for OTP access. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: add CONFIG_CMD_STM32PROG_OTPPatrick Delaunay
Add a configuration flag CONFIG_CMD_STM32PROG_OTP to enable the support of OTP update in stm32prog command. This new configuration allows to deactivate this feature for security reason and it is a preliminary step for support of OPT update with the OP-TEE provisioning TA. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10stm32mp: stm32prog: fix commentPatrick Delaunay
Fix "partition" in comment. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-04spl: mmc: extend spl_mmc_boot_mode() to take mmc argumentAndre Przywara
Platforms can overwrite the weak definition of spl_mmc_boot_mode() to determine where to load U-Boot proper from. For most of them this is a trivial decision based on Kconfig variables, but it might be desirable the probe the actual device to answer this question. Pass the pointer to the mmc struct to that function, so implementations can make use of that. Compile-tested for all users changed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA) Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3) Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-15stm32mp: psci: Implement PSCI system suspend and DRAM SSRMarek Vasut
Implement PSCI system suspend and placement of DRAM into SSR while the CPUs are in suspend. This saves non-trivial amount of power in suspend, on 2x W632GU6NB-15 ~710mW. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
2022-03-15stm32mp1: bsec: add missing dev in function commentPatrick Delaunay
Add the missing @dev reference in some function description. Fixes: b66bfdf238b9 ("arm: stm32mp: bsec: migrate trace to log macro") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-03-15stm32mp: bsec: add permanent lock write supportPatrick Delaunay
Add support of the permanent lock support in U-Boot proper when BSEC is not managed by secure monitor (TF-A SP_MIN or OP-TEE). This patch avoid issue with stm32key command and fuse command on basic boot for this missing feature of U-Boot BSEC driver. Reported-by: Johann Neuhauser <jneuhauser@dh-electronics.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Tested-by: Johann Neuhauser <jneuhauser@dh-electronics.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24configs: stm32mp15: Enable OF_BOARD flagPatrice Chotard
Since commit 985503439762 ("fdt: Don't call board_fdt_blob_setup() without OF_BOARD") board_fdt_blob_setup() is no more called on STM32MP platforms in trusted boot which hangs during boot process. Enable OF_BOARD flag to fix this issue. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-24stm32prog: add partition name in treat_partition_list error messagesPatrick Delaunay
Add the partition name and remove the line number in error messages of treat_partition_list() to provide correct information to user of STM32CubeProgrammer. The "line number" value was confusing because it is incorrect here; the index in part_array[] is not aligned with the line number in the parsed Layout file, because the empty lines and the lines beginning by '#' are skipped during the first parsing in parse_flash_layout(). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24stm32mp: correct the dependency for bootcount configsPatrick Delaunay
Default value for CONFIG_SYS_BOOTCOUNT_SINGLEWORD and CONFIG_SYS_BOOTCOUNT_ADDR are only needed when CONFIG_BOOTCOUNT_GENERIC is used. This patch avoids to define these configs when an other bootcount backend is activated, for example for CONFIG_BOOTCOUNT_ENV. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24stm32mp: remove the bootcount activationPatrick Delaunay
Today the bootcount is not managed by the Linux kernel for STM32MP15 as we don't have driver to update the used backup register in TAMP and the recovery command still executes the normal bootcmd with 'altbootcmd=run bootcmd'. So the bootcount feature is never used, the config CONFIG_BOOTCOUNT_LIMIT and the associated environment variable 'altbootcmd' can be removed to reduce the U-Boot size. Each boards can re-enable this feature later in their defconfig, if it is needed, with the expected backend, for example CONFIG_BOOTCOUNT_GENERIC or CONFIG_BOOTCOUNT_ENV. CC: Marek Vasut <marex@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24arm: stm32mp: Fix USB boot device reportMarek Vasut
In case the SoC reports the boot device type is USB, it means the SPL was loaded via BootROM DFU mode. Currently the spl_boot_device() returns boot device as USB host, change it to DFU instead, so the SPL can continue the DFU boot and load U-Boot via DFU. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-21Convert CONFIG_BOOTP_SERVERIP to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_BOOTP_SERVERIP Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-10stm32mp15: tidy up #ifdefs in cpu.cPatrick Delaunay
We should avoid #ifdef in C modules and the unused functions are eliminated by the linker. Use the more readable IS_ENABLE() instead. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: remove configs dependency on CONFIG_TFABOOTPatrick Delaunay
Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig - always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI and CONFIG_CPU_V7_HAS_NONSEC - CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig - the correct sysreset driver is activated in each defconfig: CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10arm: stm32mp: bsec: Update OTP shadow registers in SPLPatrick Delaunay
Currently the upper OTP (after 57) are shadowed in U-Boot proper, when TFABOOT is not used. This choice cause an issue when U-Boot is not executed after SPL, so this BSEC initialization is moved in SPL and no more executed in U-Boot, so it is still executed only one time. After this patch this BSEC initialization is done in FSBL: SPL or TF-A. To force this initialization in all the case, the probe of the BSEC driver is forced in SPL in the arch st32mp function: spl_board_init(). Even if today BSEC driver is already probed in STM32MP15x clock driver clk_stm32mp1.c because get_cpu_type() is called in stm32mp1_get_max_opp_freq() function. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10gpio: stm32: create include file for driver private dataPatrick Delaunay
The stm32 gpio driver private data are not needed in arch include files, they are not used by code except for stm32 gpio and pincontrol drivers, using the same IP; the defines for this IP is moved in a new file "stm32_gpio_priv.h" in driver/gpio. This patch avoids to have duplicated file gpio.h for each SOC in MPU directory mach-stm32mp and in each MCU directory arch-stm32* and allows to remove CONFIG_GPIO_EXTRA_HEADER for all STM32. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10stm32mp: add binman support for STM32MP15xPatrick Delaunay
Use binman to add the stm32image header on SPL binary for basic boot or on U-Boot binary when it is required, i.e. for TF-A boot without FIP support, when CONFIG_STM32MP15x_STM32IMAGE is activated. The "binman" tool is the recommended tool for specific image generation. This patch allows to suppress the config.mk file and it is a preliminary step to manage FIT generation with binman. The init_r parsing of U-Boot device tree to search the binman information is not required for STM32MP15, so the binman library can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-10stm32mp: stm32prog: Normalise newlinesWilliam Grant
The missing trailing newline could confuse check-config.sh if the definition of an option was on the first line of the next file that find(1) happened to return. Signed-off-by: William Grant <wgrant@ubuntu.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-05tee: add a stub for tee_find_devicePatrick Delaunay
Add stub for tee_find_device function when CONFIG_TEE is not activated to simplify the caller code. This patch allows to remove the CONFIG_IS_ENABLED(OPTEE) tests for stm32 platform. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@inaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-06stm32mp: Fix board_get_usable_ram_top()Patrice Chotard
When booting in EFI, lib/efi_loader/efi_memory.c calls board_get_usable_ram_top(0) which returns by default gd->ram_base + gd->ram_size which is the top of DDR. In case of OPTEE boot, the top of DDR is currently reserved by OPTEE, board_get_usable_ram_top(0) must return an address outside OPTEE reserved memory. gd->ram_top matches this constraint as it has already been initialized by substracting all DT reserved-memory (included OPTEE memory area). Fixes: 92b611e8b003 ("stm32mp: correctly handle board_get_usable_ram_top(0)") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-09-04spi: Rename SPI_SUPPORT to SPISimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-24 15:59:33 +0000