summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2021-04-24Merge tag 'mips-pull-2021-04-24' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-mips - MIPS: octeon: fix minor bugs of initial merge - MIPS: octeon: add support for QLM and PCI-E controller - MIPS: octeon: add support for AHCI and SATA - MIPS: octeon: add E1000 ethernet support - MIPS: octeon: add Octeon III NIC23 board - ata/scsi: add support for Big Endian platforms
2021-04-23mips: octeon: ebb7304: Add support for some I2C devicesAaron Williams
This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: dts/dtsi: Change UART DT node to use clocks propertyAaron Williams
We already have a clock driver for MIPS Octeon. This patch changes the Octeon DT nodes to supply the clock property via the clock driver instead of using an hard-coded value, which is not correct in all cases. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: Add Octeon III NIC23 board supportStefan Roese
This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT nodeStefan Roese
Add the AHCI compatible SATA DT node to the Octeon CN73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: cpu.c: Enable AHCI/SATA supportStefan Roese
For easy AHCI/ SATA integration, this patch adds board_ahci_enable() for the MVEBU AHCI driver, which will be used by this platform. This platform specific "enable" function will setup the proper endian swapping in the AHCI controller so that it can be used by the common AHCI code. Additionally the endian swizzle entry for AHCI in octeon_should_swizzle_table[] is removed, as this enabled the original lowlevel code function, e.g. octeon_configure_qlm(), for the QLM setup to work correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: cpu.c: Add arch_misc_init() for pci-console & pci-bootcmdStefan Roese
This patch adds the necessary platform infrastructure code, so that the MIPS Octeon drivers "serial_octeon_pcie_console" & "serial_bootcmd" can be used. This is e.g. the bootmem initialization in a compatible way to the Marvell 2013 U-Boot, so that the exisiting PC remote tools like "oct-remote-console" & "oct-remote-load" can be used. This is be done in the newly introduced arch_misc_init(), which calls the necessary init functions when enabled. These patches are in preparation for the MIPS Octeon NIC23 board support, which is a desktop PCIe target board enabling these features. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG definedStefan Roese
As DEBUG is no Kconfig symbol, we can't use the IS_ENABLED() macros. This patch switches to the unfortunately necessary #ifdef usage again to make it work correctly. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: cvmx-bootmem: Fix compare in "if" statementStefan Roese
While porting from the Marvell source, I introduced a bug by misplacing the parenthesis. This patch fixes this issue. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.hStefan Roese
This makes is easier to use this macro from non-DDR related files. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: mrvl, cn73xx.dtsi: Add PCIe controller DT nodeStefan Roese
This patch adds the PCIe controller node to the MIPS Octeon 73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Kconfig: Enable CONFIG_SYS_PCI_64BITStefan Roese
Setting CONFIG_SYS_PCI_64BIT is needed for correct PCIe functionality on MIPS Octeon. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Makefile: Enable building of the newly added C filesStefan Roese
This patch adds the newly added C files to the Makefile to enable compilation. This is done in a separate step, to not introduce build breakage while adding the single files with potentially missing externals. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add octeon_qlm.cAaron Williams
Import octeon_qlm.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add octeon_fdt.cAaron Williams
Import octeon_fdt.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-qlm.cAaron Williams
Import cvmx-qlm.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pcie.cAaron Williams
Import cvmx-pcie.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-helper.cAaron Williams
Import cvmx-helper.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-helper-util.cAaron Williams
Import cvmx-helper-util.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-helper-jtag.cAaron Williams
Import cvmx-helper-jtag.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-helper-fdt.cAaron Williams
Import cvmx-helper-fdt.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-helper-cfg.cAaron Williams
Import cvmx-helper-cfg.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Move cvmx-lmcx-defs.h from mach/cvmx to machStefan Roese
To match all other cvmx-* header, this patch moves the already existing cvmx-lmcx-defs.h header one directory up. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Misc changes required because of the newly added headersStefan Roese
With the newly added headers and their restructuring (which macro is defined where), some changes in the already existing Octeon files are necessary. This patch makes the necessary changes. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add misc remaining header filesAaron Williams
Import misc remaining header files from 2013 U-Boot. These will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: Add cvmx-sso-defs.h header fileAaron Williams
Import cvmx-sso-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-sriox-defs.h header fileAaron Williams
Import cvmx-sriox-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-sriomaintx-defs.h header fileAaron Williams
Import cvmx-sriomaintx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-smix-defs.h header fileAaron Williams
Import cvmx-smix-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-sli-defs.h header fileAaron Williams
Import cvmx-sli-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-sata-defs.h header fileAaron Williams
Import cvmx-sata-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-rst-defs.h header fileAaron Williams
Import cvmx-rst-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pow-defs.h header fileAaron Williams
Import cvmx-pow-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pko-defs.h header fileAaron Williams
Import cvmx-pko-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pki-defs.h header fileAaron Williams
Import cvmx-pki-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pip-defs.h header fileAaron Williams
Import cvmx-pip-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pepx-defs.h header fileAaron Williams
Import cvmx-pepx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pemx-defs.h header fileAaron Williams
Import cvmx-pemx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pcsx-defs.h header fileAaron Williams
Import cvmx-pcsx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pciercx-defs.h header fileAaron Williams
Import cvmx-pciercx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-pcieepx-defs.h header fileAaron Williams
Import cvmx-pcieepx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-npi-defs.h header fileAaron Williams
Import cvmx-npi-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-mio-defs.h header fileAaron Williams
Import cvmx-mio-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-l2c-defs.h header fileAaron Williams
Import cvmx-l2c-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-ipd-defs.h header fileAaron Williams
Import cvmx-ipd-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-gserx-defs.h header fileAaron Williams
Import cvmx-gserx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-gmxx-defs.h header fileAaron Williams
Import cvmx-gmxx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-fpa-defs.h header fileAaron Williams
Import cvmx-fpa-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-dtx-defs.h header fileAaron Williams
Import cvmx-dtx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: Add cvmx-dpi-defs.h header fileAaron Williams
Import cvmx-dpi-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-20 18:11:12 +0000