| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
This gives a fast basic ram test.
While at it clean up whitespace
|
|
|
|
|
|
|
|
Adds the patch_ddr_size cmd which patches the DCD data structure
settings for the DDR memory controller optimized for the module.
Currently this is only the bus width which is changed from 32bit
to 64bit on DL modules.
This allows to use a unified U-Boot for S and DL modules. Right after
flashing the U-Boot to eMMC this cmd will be run to complete the
update.
|
|
|
|
|
|
|
|
|
|
|
|
Prepare for additional SKU's
|
|
Since we use the same UART to download U-Boot and get the U-Boot
prompt, it is quite hard to switch between the download program
and the terminal emulator within the boot delay. This patch
disables the automatic boot by setting the bootdelay to -1 when
using the recovery mode (serial downloader).
|
|
On migration from 2011.11 to 2014.04 U-Boot the initialization
code also switched the source of the DRAM clock to system clock.
However, since Colibri VF61 runs on 500MHz system clock, we
should use PLL2 as DRAM clock.
This also broke suspend on resume: The system switches to 24MHz
FIRC as system clock when entering suspend mode while still
running from DRAM. However, DRAM seems not to work on 24MHz,
which then lead to a system freeze during entering suspend mode.
|
|
|
|
Enable the SCSC (Slow Clock Source Controller) and select the
external 32KHz oscillator. This improves accuracy of the RTC.
|
|
Apalis iMX6+ 1GB V1.0A V1.0B are wired for DCE, now that the code is prepared
for DTE switch back to DCE.
|
|
|
|
The Apalis standart uses the UART in DTE mode.
This commit uses UART1 in DTE mode for the U-Boot console and
configures all used UARTs to start in DTE mode.
Note that for this to work module version V1.0A requires TXD/RXD to be crossed
between the Apalis iMX6 and the RS232 transceiver.
|
|
Change to a Toradex email address.
Properly handle malloc return value.
Re-implement memory kernel argument passing in order to properly use
all available memory even on our currently used kernel.
Re-integrate U-Boot board size limit checking.
Re-add CMD_ASKENV and CMD_EXT2 but disable CMD_FLASH and CMD_LOADB/S
again.
Get rid of spurious double CMD_BOOTZ define.
Enable VERSION_VARIABLE in order to be able to check U-Boot version
from our update scripts.
Change boot delay to zero and enable ZERO_BOOTDELAY_CHECK to be more
in-line with our other BSPs.
Re-integrate vidargs environment handling.
Added setupdate command introduced on Apalis iMX6 to ease update
procedure from SD card.
While at it ran it through checkpatch.pl and cleaned it up.
|
|
follow 10fda48779fc86e74e4482cbc7667431237cf60c
i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
follow 164d98466103a46b7c881149e92ec2a28a6375be
Move setup_sata to common part
|
|
follow commit a79854a90f7297ddfda2114c867fd62643fa6e3a
|
|
2014.04-colibri_vf
Conflicts:
boards.cfg
|
|
Detect Colibri VF50 modules by read L2 cache configuration of the
running CPU. Colibri VF50 modules come without L2 cache. Configure
CPU clock accordingly.
|
|
Add support for Toardex specific config block. This data structure
is available on NAND and written at production time. Get MAC
address as well as serial number and board revision from this
structure.
|
|
This enables NAND for Colibri VF61/VF50. The environment is now
taken from NAND. The first block, the boot control block, is
definied as a seperate partition in order for easier erasing.
|
|
This adds initial support for Colibri VF61 based on Freescale
Vybrid Tower System TWR-VF65GS10:
- New Machine ID
- Default UART_A on SCI0
- FEC1
- Enabled command line editing
- PLL5 based RMII clocking (e.g. no external crystal)
- UART_A and UART_C I/O muxing
- Boot from OCRAM gfxRAM
Tested on Colibri VF61 V1.1 booting using serial loader over
UART.
|
|
Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves DDR3
issues with newer silicon (1.1). This register was added in revision
4 of the Vybrid Reference Manual.
|
|
Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and
board detection but faild to return a valid tricorder_eeprom struct for backup
case. When pressing S200 while reading EEPROM we ignore the value. We
returned falsely a tricorder_eeprom struct with uninitialized data which is
just garbage.
Initialize it by zeroing the whole structure.
Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
Cc: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
|
During switch to device tree, commit 1ecab0f has removed this code.
INFORM4 and INFORM5 registers are used by TRATS2 first stage bootloader for
providing recovery. For normal operation, those two must be cleared out.
This error emerges when one force reset from u-boot's command line for
three times.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
include/configs/trats.h
include/configs/trats2.h
include/mmc.h
|
|
Get rid of double VF610_PAD_DDR_A15__DDR_A_15 iomux configuration.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
|
|
Avoids "could not find output section .gnu.hash" ld.bfd errors on openSUSE.
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
|
|
Clock Manager driver will be called to reconfigure all the
clocks setting based on user input. The input are passed to
Preloader through handoff files
Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
|
|
Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg
Signed-off-by: Stefano Babic <sbabic@denx.de>
|
|
i.MX6 uses the 'standard' board revision for things, i.e.
video decoding no longer works.
so don't interfere with the Apalis iMX6 HW Revision */
|
|
Some eMMC chips may need the RST_n_FUNCTION bit set to a non-zero value
in order for warm reset of the system to work. Details on this being
required will be part of the eMMC datasheet. Also add using this
command to the dra7xx README.
* Whitespace fix by panto
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
|
|
|
|
while at it remove warnings
|
|
We decided to have the MAC addr only in the configblock
|
|
The DRAM size can be easily detected at runtime on i.MX53. Implement
such detection on M53EVK and adjust the rest of the macros accordingly
to use the detected values.
An important thing to note here is that we had to override the function
for trimming the effective DRAM address, get_effective_memsize(). That
is because the function uses CONFIG_MAX_MEM_MAPPED as the upper bound of
the available DRAM and we don't have gd->bd->bi_dram[0].size set up at
the time the function is called, thus we cannot put this into the macro
CONFIG_MAX_MEM_MAPPED . Instead, we use custom override where we use the
size of the first DRAM block which we just detected.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
|
|
The DRAM size can be easily detected at runtime on i.MX53. Implement
such detection on MX53QSB and adjust the rest of the macros accordingly
to use the detected values.
An important thing to note here is that we had to override the function
for trimming the effective DRAM address, get_effective_memsize(). That
is because the function uses CONFIG_MAX_MEM_MAPPED as the upper bound of
the available DRAM and we don't have gd->bd->bi_dram[0].size set up at
the time the function is called, thus we cannot put this into the macro
CONFIG_MAX_MEM_MAPPED . Instead, we use custom override where we use the
size of the first DRAM block which we just detected.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
|
|
Add support for PCIe on MX6 SabreSDP board and enable the support
in the config file.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Liu Ying <Ying.Liu@freescale.com>
|
|
Enable USB0 clock by resetting bit 20 of MSTPCR2. Leave other bits unchanged.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
All pins should be output.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
If we build this function in cases where we would be discarding it
anyhow we still end up with maybe unused warnings. Rather than litter
the function with __maybe_unused, just spell out when to build it.
Signed-off-by: Tom Rini <trini@ti.com>
|
