| Age | Commit message (Collapse) | Author |
|---|
|
Now that am335x_evm boots OK on the Beaglebone black, drop the latter
and update the docs to cover the change.
Also add a few updates about 'make fit' and drop the note about the
security review, as U-Boot's verified boot has had quite extensive
review now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Add better logging for power init so that CONFIG_LOG_ERROR_RETURN can
be enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Padmarao is leaving Microchip soon, and suggested that I should take
over maintaining the Icicle in U-Boot in his stead.
Suggested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Unfortunately when enabling FDT fixups for the AM62x family of SoCs and
moving TF-A to the bottom of RAM we missed the BeaglePlay. This is
causing Linux's memory allocator to clobber TF-A and break its boot.
Enable OF_SYSTEM_SETUP to fixup the kernel's FDT to inform it of the
actual location of the firmware
CC: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/21111
- pmic fix for rk8xx;
- pinctrl fix for rk3188/rv1126/rk3588;
- mkimage fix for rockcihp "-l" option;
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21125
- Update imx8mn_s2 DDR initialization to fix USB boot.
|
|
The timing upstream was wrong corresponding to the production.
This come evident after commit b614ddb5d33
(ddr: imx: Save the FW loading if it hasn't changed). This
change fix booting from usb
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
Unlike fdt_node_check_compatible() which returns 0 if node is compatible,
ofnode_device_is_compatible() return true which is non-zero if node is
compatible. The intention of the code is to exit from the function in
case the node is not compatible with "micrel,ks8851-mll". Add the missing
invert into the conditional to reinstate original behavior.
This exposes a follow up problem caused by conversion to DM based FMC2 EBI
driver, where the FMC2 EBI is not configured when accessed by this code.
Probe the KS8851 MAC, which also configures the FMC2 EBI as a dependency,
so that the KS8851 MAC CCR register can be accessed over the FMC2 EBI bus
and checked for EEPROM present bit.
Fixes: 5a605b7c8615 ("board: dhelectronics: stm32mp1: convert to livetree")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
This reverts commit 41a60d0e5cef54a59596a58940fa7c9cf071034b.
On some of the supported devices the adc detect code always returns
that the button has been pushed, and as a result the device will
not boot normally.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-sh
|
|
Since any changes to the RZ/G2 family go through Marek's tree,
update the MAINTAINER file to automatically show his name
when running get_maintainer.pl. Without this, he is not
copied.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
- board: fix support for icicle
- board: support Star64 board
- andes: minor fixes
- riscv: deprecate cache enablement in start.S
|
|
boards support"
Javier Martinez Canillas <javier@dowhile0.org> says:
Hello,
I noticed that the IGEPv2 board did not boot anymore with mainline U-Boot.
This was caused by a driver change to allocate its platform data before
relocation and U-Boot not having enough pre-relocation heap size for this.
This series fixes this issue and also makes the board support more modern,
by enabling DM for SPL and migrating the IGEP boards to use upstream DTBs.
|
|
This change is heavily based on commit e0cc7df9fdf2 ("omap3_beagle: Update
for DM SPL support"), that did the same update for the OMAP3 Beagle board.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Enric Balletbo i Serra <eballetbo@gmail.com>
|
|
Similar to the Milk-V Mars, The Star64 board contains few differences to the
VisionFive 2 boards, so can be part of the same U-boot build.
Signed-off-by: Henry Bell <dmoo_dv@protonmail.com>
Cc: ycliang@andestech.com
Cc: heinrich.schuchardt@canonical.com
Reviewed-by: E Shattow <lucent@gmail.com>
|
|
A given AMP configuration for a board may make either one, or neither
of, the ethernet ports available to U-Boot. The Icicle's init code will
fail if mac1 is not present, so move it to the optional approach taken
for mac0.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Node offsets returned by libfdt can contain negative error numbers, so
the variable type should be "int". As things stand, if the ethernet
nodes are not found in the early init callback, the if (node < 0) tests
pass and the code errors out while trying to set the local-mac-address
for a non-existent node.
Fixes: 64413e1b7c ("riscv: Add Microchip MPFS Icicle Kit support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
|
|
Most of the current URLs should be redirected but some aren't already,
so let's anticipate more IT hiccups by migrating to new URLs.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
See
https://embedded.cherry.de/theobroma-systems-is-now-officially-part-of-cherry-se/
While the mail addresses on the theobroma-systems.com domain should be
redirect to cherry.de, let's anticipate IT hiccups and avoid important
mails not reaching us by swapping the domain name wherever appropriate
for the newer one.
Christoph Mueller isn't working at ~Theobroma~ CHERRY Embedded Solutions
anymore, but I don't know his new mail address so mails destined to him
will keep bouncing.
Cc: Heiko Stuebner <heiko.stuebner@cherry.de> <heiko.stuebner@theobroma-systems.com>
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Cc: Klaus Goger <klaus.goger@cherry.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Marcel is leaving Toradex and the email will start bouncing in a few
weeks, move maintainership to myself.
Cc: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Use upstream device tree files and bindings. To do so:
- imply (enable) OF_UPSTREAM option for E850-96 target
- point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts
- remove now not needed local dts files, binding docs and headers
- update MAINTAINERS and board/samsung/e850-96/MAINTAINERS
correspondingly
Upstream device tree files for Exynos850 SoC and E850-96 board are
pretty much the same as local (removed) ones, so the conversion is
rather straightforward and painless in this case. The appended dts file
(arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged.
The only remaining local dt-bindings doc for E850-96 board is
exynos-pmu.yaml. It wasn't removed as it's quite different from Linux
kernel version. Particularly U-Boot local version of exynos-pmu.yaml
describes "samsung,uart-debug-1" property, which is not present in Linux
kernel binding. Later it might be upstreamed to Linux kernel, and once
it's done the U-Boot exynos-pmu.yaml binding can be removed.
No functional change.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
The Indiedroid Nova is a Rockchip RK3588S based SBC from Indiedroid.
Specifications:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
4/8/16GB memory LPDDR4x
Mali G610MC4 GPU
Optional eMMC
2x USB 2.0, 2x USB 3.0, 1x USB 3.0 C port with DP Alt
1x MIPI-CSI Port (4-lane or 2x 2-lane)
1x MIPI-DSI 4-lane connector
1x Micro HDMI 2.1 output, 1x DP 1.4 output
Gigabit Ethernet
Realtek RTL8821CS WiFi
4 pin debug UART connector
40 pin GPIO header
Size: 85mm x 56mm (Raspberry Pi Form Factor)
Kernel commit:
3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device.
UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this
successfully boots mainline Linux.
Kernel commit:
e99adc97e21a ("arm64: dts: rockchip: Add Powkiddy X55")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
As boards from multiple vendors (Milk-V, StarFive, Pine64) use the mac
command provide a sub-command to set the vendor string.
Reported-by: E. Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
We already support the VisionFive 2 and the Milk-V Mars board by
patching the VisionFive 2 device tree. With this patch the same
is done for the Milk-V Mars CM.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: E. Shattow <lucent@gmail.com>
Reviewed-by: E. Shattow <lucent@gmail.com>
|
|
The EEPROM provides information about the size of the eMMC.
Provide a new function get_mmc_size_from_eeprom() to read it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E. Shattow <lucent@gmail.com>
|
|
Wadim Egorov <w.egorov@phytec.de> says:
Factor out code that we can reuse across all our K3 based SoMs.
2nd patch of this series require patch [1] to be applied first.
[1] https://lists.denx.de/pipermail/u-boot/2024-April/552021.html
|
|
Environment handling code can be reused across all our K3 based SoMs.
Instead of adding the same code for every new SoM, move it to a common
board.c file.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Tony Dinh <mibodhi@gmail.com> # on Zyxel NSA310s
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
