| Age | Commit message (Collapse) | Author |
|---|
|
The function getchar() returns an 'int' and not a 'char'. Coverity notes
that "Assigning the return value of getchar to char ... truncates its value."
and so for the most part we can resolve this easily by using 'int' as
intended, and often used throughout the codebase. A few places are not
so simple and would require further re-architecting of the code in order
to change this, so we leave them be.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Just check that the length is at least 2. This allows passing strings
like ".b", which can be convenient when constructing
tests (i.e. parametrizing the suffix used).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
|
|
This function obviously does not and must not modify "arg". Change the
prototype to allow passing an argument of type "const char*" without
requiring a cast.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
|
|
If line overflows readline it will not be returned, fix this behavior,
make it optional and documented properly.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20240105072212.6615-6-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Set flag to enable console record on console_record_init
and not only on console_record_reset_enable. This fixes
missing start of U-Boot log for fastboot oem console
command.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-5-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Add console_record_isempty to check if console record buffer
contains any data.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-4-clamor95@gmail.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
This is extending commit 6516c9b349b3 ("spl: binman: Disable u_boot_any
symbols for i.MX8M boards") to i.MX93 boards.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
|
|
Allow the alignment to be specified when creating a bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The v0.9 spec provides for a 24-byte header. Update the implementation
to match this.
Rename the fields of the bloblist header to align to the spec.
Adds an alignment field into the bloblist header.
Update the related bloblist APIs and UT testcases.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The v0.9 spec provides for an 8-byte header for each blob, with fewer
fields.
The blob data start address should be aligned to the alignment specified
by the bloblist header.
Update the implementation to match this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Rather than setting the alignment using the header size, add an entirely
new entry to cover the gap left by the alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Use a sinple 8-bit checksum for bloblist, as specified by the spec
version 0.9.
Spec v0.9 specifies that the entire bloblist area is checksummed,
including unused portions. Update the code to follow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Drop spare value from bloblist record header.
For now it is still present in the header, with an underscore, so that
tests continue to pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Convert accesses to tag and hdr_size via function for grouping tag and
hdr_size together later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The updated bloblist structure stores the alignment as a power-of-two
value in its structures. Adjust the API to use this, to avoid needing to
calling ilog2().
Update the bloblist alignment from 16 bytes to 8 bytes.
Drop a stale comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Align bloblist tags with the FW handoff spec v0.9.
The most common ones are from 0.
TF related ones are from 0x100.
All non-standard ones from 0xfff000.
Added new defined tags:
BLOBLISTT_OPTEE_PAGABLE_PART for TF.
BLOBLISTT_TPM_EVLOG and BLOBLISTT_TPM_CRB_BASE for TPM.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Francis Laniel <francis.laniel@amarulasolutions.com> says:
During 2021 summer, Sean Anderson wrote a contribution to add a new shell, based
on LIL, to U-Boot [1, 2].
While one of the goals of this contribution was to address the fact actual
U-Boot shell, which is based on Busybox hush, is old there was a discussion
about adding a new shell versus updating the actual one [3, 4].
So, in this series, with Harald Seiler, we updated the actual U-Boot shell to
reflect what is currently in Busybox source code.
Basically, this contribution is about taking a snapshot of Busybox shell/hush.c
file (as it exists in commit 37460f5da) and adapt it to suit U-Boot needs.
This contribution was written to be as backward-compatible as possible to avoid
breaking the existing.
So, the modern hush flavor offers the same as the actual, that is to say:
1. Variable expansion.
2. Instruction lists (;, && and ||).
3. If, then and else.
4. Loops (for, while and until).
No new features offered by Busybox hush were implemented (e.g. functions).
It is possible to change the parser at runtime using the "cli" command:
=> cli print
old
=> cli set modern
=> cli print
modern
=> cli set old
The default parser is the old one.
Note that to use both parser, you would need to set both
CONFIG_HUSH_MODERN_PARSER and CONFIG_HUSH_OLD_PARSER.
In terms of testing, new unit tests were added to ut to ensure the new behavior
is the same as the old one and it does not add regression.
Nonetheless, if old behavior was buggy and fixed upstream, the fix is then added
to U-Boot [5].
In sandbox, all of these tests pass smoothly:
=> printenv board
board=sandbox
=> ut hush
Running 20 hush tests
...
Failures: 0
=> cli set modern
=> ut hush
Running 20 hush tests
...
Failures: 0
Thanks to the effort of Harald Seiler, I was successful booting a board:
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> cli get
old
=> boot
...
root@lepotato:~#
root@lepotato:~# reboot
...
=> cli set modern
=> cli get
modern
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> boot
...
root@lepotato:~#
This contribution indeed adds a lot of code and there were concern about its
size [6, 7].
With regard to the amount of code added, the cli_hush_upstream.c is 13030 lines
long but it seems a smaller subset is really used:
gcc -D__U_BOOT__ -E common/cli_hush_upstream.c | wc -l
2870
Despite this, it is better to still have the whole upstream code for the sake of
easing maintenance.
With regard to memory size, I conducted some experiments for version 8 of this
series and for a subset of arm64 boards and found the worst case to be 4K [8].
Tom Rini conducted more research on this and also found the increase to be
acceptable [9].
If you want to review it - your review will really be appreciated - here are
some information regarding the commits:
* commits marked as "test:" deal with unit tests.
* commit "cli: Add Busybox upstream hush.c file." copies Busybox shell/hush.c
into U-Boot tree, this explain why this commit contains around 12000 additions.
* commit "cli: Port Busybox 2021 hush to U-Boot." modifies previously added file
to permit us to use this as new shell.
The really good idea of #include'ing Busybox code into a wrapper file to define
some particular functions while minimizing modifications to upstream code comes
from Harald Seiler.
* commit "cmd: Add new parser command" adds a new command which permits
selecting parser at runtime.
I am not really satisfied with the fact it calls cli_init() and cli_loop() each
time the parser is set, so your reviews would be welcomed.
* Other commits focus on enabling features we need (e.g. if).
|
|
This commit adds the following hush busybox upstream commits:
791b222dd55d ("sleep: fix "sleep -- ARGS"")
5353df91cba7 ("Update applet size estimates")
e41e481fd571 ("hush: fix a compile failure")
07a95cfcabb0 ("ash: disable check for "good" function name, bash does not check this")
e5692e2342c6 ("hush: quote values in "readonly" output")
96769486e20f ("shell: move varcmp() to shell_common.h and use it in hush")
bab8828b0dad ("hush: fix expansion of space in "a=${a:+$a }c" construct")
b5be8da350b5 ("hush: make "false" built-in")
6824298ab4d3 ("hush: fix ELIF cmd1;cmd2 THEN ... not executing cmd2, closes 15571")
3a7f00eadcf4 ("hush: add comment about abort on syntax error %{^}")
acae889dd972 ("ash,hush: tab completion of functions and aliases")
90b607d79a13 ("hush: quote variable values printed by "set" (match ash behavior)")
6748e6494c22 ("hush (NOMMU): fix LINENO in execed children")
fd5fb2d2b596 ("hush: speed up "big heredoc" code")
1409432d072e ("hush: add TODO comment")
93ae7464e6e4 ("hush: restore SIGHUP handling, this time explain why we do what we do")
1fdb33bd07e5 ("hush: restore tty pgrp on SIGHUP")
6101b6d3eaa0 ("hush: remove special handling of SIGHUP")
93e0898c663a ("shell: fix SIGWINCH and SIGCHLD (in hush) interrupting line input, closes 15256")
969e00816835 ("hush: code shrink")
27be0e8cfeb6 ("shell: fix compile failures in some configs")
7d1c7d833785 ("ash,hush: use HOME for tab completion and prompts")
21afddefd258 ("hush: fix "error: invalid preprocessing directive ##"")
e53c7dbafc78 ("hush: fix set -n to act immediately, not just after run_list()")
574b9c446da1 ("hush: fix var_LINENO3.tests failure")
49bcf9f40cff ("hush: speed up ${x//\*/|} too")
53b2fdcdba4c ("*: add NOINLINEs where code noticeably shrinks")
7c3e96d4b3d4 ("shell: use more compact SHELL_ASH / HUSH config defines. no code changes")
62f1eed1e191 ("hush: in a comment, document what -i might be doing")
aaf3d5ba74c5 ("shell: tweak --help")
db5546ca1018 ("libbb: code shrink: introduce and use [_]exit_SUCCESS()")
931c55f9e2b4 ("libbb: invert the meaning of SETUP_ENV_NO_CHDIR -> SETUP_ENV_CHDIR")
12566e7f9b5e ("ash,hush: fix handling of SIGINT while waiting for interactive input")
987be932ed3c ("*: slap on a few ALIGN_PTR where appropriate")
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Enables the use of for, while and until loops for command line as
well as with run_command().
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Adds support for "if then else" construct both for command line interface and
through run_command().
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
In Busybox hush, '<' and '>' are used as redirection operators.
For example, cat foo > bar will write content of file foo inside file bar.
In U-Boot, we do not have file system, so we can hardly redirect command output
inside a file.
But, in actual U-Boot hush, these operators ('<' and '>') are used as string
compare operators.
For example, test aaa < bbb returns 0 as aaa is before bbb in the dictionary.
Busybox hush also permits this, but operators need to be escaped ('\<' and
'\>').
Indeed, if escaping is needed it permits the developer to think about its code,
as in a lot of case, we want to compare integers (using '-lt' or '-gt') rather
than strings.
As testing in U-Boot is handled by the test command, we will stick with the
original behaviour and not adapt to Busybox one.
Nonetheless, if one day we decide to implement test with '[[ ]]', we will then
stick to upstream Busybox behavior.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Enables using, in code, modern hush as parser for run_command function family.
It also enables the command run to be used by CLI user of modern hush.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
run_command() is called internally by the command run and it can also be called
directly from U-Boot code, e.g. to do unit tests.
This commit adds this path to go to modern hush.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Enables variables expansion for modern hush, both for local and environment
variables.
So the following commands:
foo=bar
echo $foo
setenv bar foo
echo $bar
leads to "bar" and "foo" being printed on console output.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
If one defines HUSH_MODERN_PARSER, it is then possible to use modern parser with:
=> cli get
old
=> cli set modern
=> cli get
modern
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
This command can be used to print the current parser with 'cli get'.
It can also be used to set the current parser with 'cli set'.
For the moment, only one value is valid for set: old.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
This flag is used to indicate we are using the hush parser.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
For the moment, the menu contains only entry: HUSH_OLD_PARSER which is the
default.
The goal is to prepare the field to add a new hush parser which guarantees
actual behavior is still correct.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Adds new file cli_hush_upstream.c, it is a copy of Busybox hush file as it was of
time to commit 37460f5da.
This commit modifies Busybox hush to not compile some part specific to Busybox
and adds some code needed by U-Boot.
The modifications consists mainly on adding code #if(n)def guards.
For the moment, this refurbished flavor of hush only permits running command
without any keywords (i.e., if and for are not recognized) or variable expansion
(i.e., echo $foo prints foo and not value stored in variable foo).
A new file was also added to define some functions specific to U-Boot.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Signed-off-by: Harald Seiler <hws@denx.de>
|
|
This commit adds new file cli_hush_upstream.c, it is a copy of Busybox hush
file it was of time to Busybox commit 37460f5da.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The command completion temporary buffer seems to be only
used by the argv tokenizer, move it to stack. This saves
2 kiB from the binary size (depends on configuration) per:
$ aarch64-linux-gnu-readelf -s u-boot | sort -n -k 3
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The history buffer is currently a static array which can be some
10-40 kiB depending on configuration, and so adds considerably to
the U-Boot binary size. Allocate it dynamically instead to reduce
the U-Boot binary size.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Prepare v2024.01-rc5
|
|
Move the code from the 'cls' command into the console file, so it can
be called from elsewhere.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
To quote the author:
It would be useful to be able to boot an OS when CONFIG_CMDLINE is
disabled. This could allow reduced code size.
Standard boot provides a way to handle programmatic boot, without
scripts, so such a feature is possible. The main impediment is the
inability to use the booting features of U-Boot without a command line.
So the solution is to avoid passing command arguments and the like to
code in boot/
A similar process has taken place with filesystems, for example, where
we have (somewhat) separate Kconfig options for the filesystem commands
and the filesystems themselves.
This series starts the process of refactoring the bootm logic so that
it can be called from standard boot without using the command line.
Mostly it removes the use of argc, argv and cmdtbl from the internal
logic.
Some limited tidy-up is included, but this is kept to smaller patches,
rather than trying to remove all #ifdefs etc. Some function comments
are added, however.
A simple programmatic boot is provided as a starting point.
This work will likely take many series, so this is just the start.
Size growth with this series for firefly-rk3288 (Thumb2) is:
arm: (for 1/1 boards) all +23.0 rodata -49.0 text +72.0
This should be removed by:
https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/11
but it is not included in this series as it is already large enough.
No functional change is intended in this series.
Changes in v3:
- Add a panic if programmatic boot fails
- Drop RFC tag
Changes in v2:
- Add new patch to adjust position of unmap_sysmem() in boot_get_kernel()
- Add new patch to obtain command arguments
- Fix 'boot_find_os' typo
- Pass in the command name
- Use the command table to provide the command name, instead of "bootm"
|
|
At present bootstd requires CONFIG_CMDLINE to operate. Add a new
'programmatic' boot which can be used when no command line is available.
For now it does almost nothing, since most bootmeths require the
command line.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When using the USB OTG FEL mode on the Allwinner H616, the BootROM
stores some data at the end of SRAM C. This is also the location where
we place the initial SPL stack, so it will overwrite this data.
We still need the BROM code after running the SPL, so should leave that
area alone.
Interestingly this does not seem to have an adverse effect, I guess on
the "way out" (when we return to FEL after the SPL has run), this data
is not needed by the BROM, for just the trailing end of the USB operation.
However this is still wrong, and we should not clobber BROM data.
Lower the SPL stack address to be situated right below the swap buffers
we use in sunxi-fel: that should be out of the way of everyone else.
This obsoletes a previous commit (eb53e7743c8f) with the same name:
that one was changing the address in an *unused* macro in sunxi_common.h,
so the previous patch didn't have any effect at all.
Fixes: eb53e7743c8f ("sunxi: h616: lower SPL stack address to avoid BROM data")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
|
|
Prepare v2024.01-rc4
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVuHrwACgkQFHw5/5Y0
# tyy3Tgv+LB/X0ZR3IHnu1mvQ7kpOFvAjjKr0BUpcEEzsrDZeJnS6sy06m+REez2E
# UmuLeKFj5NUCYXNKtxn2+gVnJt8Tk6ftxhMTiZHmR4Y4NVc5aPtqYmVsv6Q29j0U
# mcg7AGcZTniu9/naNM+ZcDeHzLDAB0whmE9eVfixXVgyitILoLHNdFiQ7W4oR7Kh
# /mBgdMDBS3rqiRi6CuqKUnl4ADX8T3AXaSfi3hqOC5Pj+HPkZSUfyWx31mu9mN1D
# wXTHASZX06Dop25fm/ZSdWk1blBw29WqRiJBdwNatvyC5pqMsotTvAfH2AcHBEYg
# tpoper+WDOBAipt6b6Y1B7q4VPvJ97L9dFCAYqN0nGCe+rkdi+k+cly7M6Ye9xLt
# e7rVUfnKgIMP8jkLcVBYoWkFY5FiJ82O5qjoF5N3dAuHeWacDFsB5TugDTOQvblH
# LWCmcIyU1N9Ma/Ib0rTvNduvpBUYBKXYlD1+rjPZUbTUnfc79mf+ReFpcoW6Kxh+
# bkz81p8P
# =ebIZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Dec 2023 01:47:24 PM EST
# gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]
|
|
USB UFI uses fixed 12-byte commands (as does RBC, which is not
supported), but SCSI does not have this limitation. Use the correct
command block lengths depending on the subclass.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
Some devices like YubiKeys need more time before SET_ADDRESS. The spec
says we need to wait 10ms.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
On powerpc, stack protector expects a function called
__stack_chk_fail_local() instead of __stack_chk_fail()
And some versions of GCC for powerpc default to TLS canary
instead of global canary, so always force GCC to use global
canary with -mstack-protector-guard=global
Cc: Joel Peshkin <joel.peshkin@broadcom.com>
Fixes: 4e9bce12432 ("Add support for stack-protector")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
To quote the author:
The show_board_info() function was adjusted to weak so that it could be
entirely replaced with a board-specific implementation.
The intended way for boards to provide their own information is via a
sysinfo driver. But currently there is no way to show anything other
than the model name.
This series adds support for showing a few more items, in a way that is
easy for boards to extend.
Since there is already a weak checkboard() function, we don't need to
have two levels of weak function here. So this series drops the weak
attribute from show_board_info()
Existing boards will see a slight change in output, in that the model
name will appear first, before any custom output. If that is a problem,
then the solution is to implement a sysinfo driver for the board.
|
|
At present only the model name is shown on start. Some boards want to
display more information. Add some more options to allow display of the
manufacturer as well as the version and date of any prior-stage
firmware.
This is useful for coreboot, at least. If other boards have more
information to display, it is easy to add it, now.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We already have:
- a sysinfo driver-interface which can obtain the model
- a weak function called checkboard() for showing board info
The current implementation has a weak function on top of a weak
function. Now that all boards have been updated to use checkboard()
instead, drop the __weak on show_board_info()
This reverts commit f7637cc01414b9c87b6b0f861f34d83c19bfaaaf.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Move this comment to its prototype and tidy it up a bit.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Prepare v2024.01-rc3
|
|
- squashfs improvements, remove common.h in some places, assorted code
fixes, fix a few CONFIG symbol names in Kconfig files, bring in
linux's <linux/time.h> conversion functions, poplar updates, bcb
improvements.
|
|
The part_length parameter is not used. Remove it.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
If we don't DMA-align buffers we pass to FAT, it will align them itself.
This behaviour likely should be deprecated in favor of
CONFIG_BOUNCE_BUFFER, but that's a task for another series. For the
meantime, don't bother aligning the buffer unless we had been doing so in
the past.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
spi_load_image_os performs almost the same steps as the non-falcon-boot
path of spl_spi_load_image. The load address is different, and it also
loads a device tree, but that's it. Refactor the boot process so that
they can both use the same load function.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
