| Age | Commit message (Collapse) | Author |
|---|
|
i.MX95 B0 uses image container format v2 and needs DUMMY_DDR so that
update imximage.cfg and container.cfg for it.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
|
|
Use the @mailbox.org mail address also for community work.
Signed-off-by: Stefan Roese <stefan.roese@mailbox.org>
|
|
This series from Ilias Apalodimas <ilias.apalodimas@linaro.org> largely
finishes the re-sync with the Linux Kernel v5.1 kbuild system.
Link: https://lore.kernel.org/r/20250627185723.342553-1-ilias.apalodimas@linaro.org
|
|
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
|
|
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This option is very useful for A/B boot setups with read-only
filesystems: Letting U-Boot fill in the rootfs (and possibly related
parameters) allows keeping all boot parameters except the actual slot
selection in the extlinux.conf file, where they can be updated easily.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
|
|
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The LMB module has a bunch for API's which are used for allocating
memory. There are a couple of API's for requesting memory, and two
more for reserving regions of memory. Replace these different API's
with a single one, lmb_alloc_mem(). The type of allocation to be made
is specified through one of the parameters to the function.
Additionally, the two API's for reserving regions of memory,
lmb_reserve() and lmb_alloc_addr() are the same with one
difference. One can reserve any memory region with lmb_reserve(),
while lmb_alloc_addr() actually checks that the memory region being
requested is part of the LMB memory map. Reserving memory that is not
part of the LMB memory map is pretty futile -- the allocation
functions do not allocate memory which has not been added to the LMB
memory map.
This series also removes the functionality allowing for reserving
memory regions outside the LMB memory map. Any request for reserving a
region of memory outside the LMB memory map now returns an -EINVAL
error.
Certain places in the common code using the LMB API's were not
checking the return value of the functions. Checks have been added for
them. There are some calls being made from the architecture/platform
specific code which too do not check the return value. Those have been
kept the same, as I do not have the platform with me to check if it
causes any issues on those platforms.
In addition, there is a patch which refactors code in
lmb_overlaps_region() and lmb_can_reserve_region() so that both
functionalities can be put in a single function, lmb_overlap_checks().
Finally, a new patch has been added which checks the return value of
the lmb allocation function before copying the device-tree to the
allocated address.
Link: https://lore.kernel.org/r/20250617104346.1379981-1-sughosh.ganu@linaro.org
[trini: Rework arch/arm/mach-snapdragon/board.c merge]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The LMB module has undergone significant changes in the recent
past. Add a document which briefly describes what the LMB module does,
and the changes that have been made to it's design since the 2025.01
release.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next
This PR introduces 3 new platforms, two from the new Dragonwing IQx
series (QCS615 and QCS8300) as well as the IPQ5424.
Additionally:
* Support for booting downstream Android boot images on some phones is
added
* Capsule update support is expanded to be more generic, determining
which partition U-Boot was flashed to automatically and supporting
many more boards.
* Minor capsule update bugs are fixed
* A watchdog driver is added and gets timeout support
* Autoboot now requires pressing "space" specifically to stop booting as
a workaround for some boards getting rogue key presses which would
cause autoboot to fail
* Documentation is added for the Dragonwing boards
* The RB1/2 now use USB gadget mode rather than host
* A bug is fixed where GPIO reads could return incorrect values
|
|
The mkmbn tool isn't available yet, so it's still necessary to use
qtestsign for signing.
Update the docs to describe it, this can be reverted once mkmbn and the
associated tooling is merged.
Link: https://lore.kernel.org/u-boot/20250616162626.247802-1-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
As required e.g. on Fairphone 5, add an example how to use boot image
with header version 2.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-3-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
This command does not work as described in this doc, so replace it with
a regular make with qcom_defconfig, as already used for other
defconfigs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-2-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
One needs to set CROSS_COMPILE also for the actual compilation, not just
for the kconfig step, otherwise the host arch compiler would be used.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-1-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
Introducing documentation support for Qualcomm Dragonwing series
boards. Documents the build and flashing steps.
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250529154931.1879976-2-quic_bselvana@quicinc.com
[Casey: add dragonwing to board/qualcomm/index.rst]
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
Prepare v2025.07-rc5
With this merge, tighten up the LTO_FLAGS removal we added to not
trigger on ARMv7 (which is Thumb-2 and should be fine).
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
IPQ5424 expects U-Boot to have MBN version 7 header. The qtestsign tool
presently documented doesn't support v7. Hence update the instructions
to use a different tool that can support both v6 and v7.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250304110105.2762124-4-quic_varada@quicinc.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Marek Vasut <marek.vasut+renesas@mailbox.org> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Link: https://lore.kernel.org/r/20250609192701.20260-1-marek.vasut+renesas@mailbox.org
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_SW_PARTITION to clarify this is the SD/MMC software
partition table entry selector. Update the help text accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
This will allow arch(s) that use device tree blobs to pad the end of the
device tree so they can be modified by board files at run time. This will
help prevent errors such as FDT_ERR_NOSPACE from occurring.
Signed-off-by: Eric Schikschneit <eric.schikschneit@novatechautomation.com>
[trini: Change default order so that X86 && EFI_APP works correctly]
|
|
Martin Schwan <m.schwan@phytec.de> says:
This series implements a new bootmeth for RAUC A/B systems. RAUC (Robust
Auto Update Controller) is a lightweight update client, providing "Safe
and Secure OTA Updates for Embedded Linux". See the following links for
more information about RAUC:
https://rauc.io/
https://rauc.readthedocs.io/en/latest/
PHYTEC uses RAUC in its Yocto based distribution "Ampliphy" as the
default way of updating embedded devices based on PHYTEC hardware. So
far, the logic selecting the correct partitions and files to boot was
being implemented in the U-Boot environment. While this is a
straightforward way to do it, adding and supporting new platforms became
somewhat tedious and is platform-specific. The introduction of U-Boot's
"Standard Boot" provided a convincing alternative, promising a simpler
and more portable way of booting, even for RAUC systems. This led me to
implement a new bootmeth supporting RAUC A/B systems. Note, that this
new bootmeth is not proprietary to PHYTEC products and is designed to
work on other hardware with a RAUC A/B system, too.
The bootmeth currently only supports symmetric A/B partitioning layouts.
E.g. A/rescue is not (yet) supported. The partition indexes and default
slot tries can be specified via configuration options.
For now, the bootmeth_rauc uses a similar approach for loading the
Kernel and device tree as the bootmeth_script, in that it requires a FIT
containing a U-Boot script loading the desired distro. It could be
possible to support booting without a script and load the Kernel and DT
directly with this bootmeth, but I found the script method to be very
flexible for now, in letting the distro decide what to load.
The bootmeth_rauc was tested on a phyBOARD-Pollux i.MX8M Plus [1] with
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 [2].
Supported boot devices are currently only MMC devices, but it should be
possible to add SPI flashes in the future.
To test this patch stack with PHYTEC's phyBOARD-Pollux i.MX8M Plus
board, you need to adjust the boot files to include the boot.scr.uimg
containing the distro's boot script and set "optargs" to "${raucargs}"
in it. Also disable any legacyboot in the U-Boot environment and simply
boot with Standard Boot:
bootmeth order rauc
bootflow scan -lb
[1]: https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/
[2]: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2/
Link: https://lore.kernel.org/r/20250604-wip-bootmeth-rauc-v3-0-f9fad913c57e@phytec.de
[trini: Don't enable by default]
|
|
Add documentation for the bootmeth "rauc", which boots an A/B system
with RAUC from MMC.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
|
|
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26728
- Add support for imx28 BTT boards.
|
|
The btt[c3] devices are based on imx287 SoC.
U-Boot SPL 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
Trying to boot from MMC1
U-Boot 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200)
CPU: Freescale i.MX28 rev1.2 at 454 MHz
BOOT: SSP SPI #3, master, 3V3 NOR
Model: BTT3
Board: LWE BTT SoM HW rev 0
DRAM: 256 MiB
Core: 86 devices, 15 uclasses, devicetree: separate
MMC: MXS MMC: 0
Loading Environment from SPIFlash... SF: Detected is25lp128 with page
size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In: serial@80074000
Out: serial@80074000
Err: serial@80074000
Net: eth0: ethernet@800f0000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Prepare v2025.07-rc4
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Proper U-Boot for Lichee Pi 4A now runs in S mode instead of M mode,
which means the extra firmware, OpenSBI, must be built and integrated
in the image, and the vendor U-Boot cannot chainload the result image
anymore as it runs in M mode.
Remove redundant information about chainloading and update build steps
to mention OpenSBI firmware.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Fix a typo error in gcc.rst, changing "out-out-tree" to
"out-of-tree" in the Out-of-tree section.
Signed-off-by: BehradElmi <behradelmi1@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The details of the sysfw.itb from the R5 build that
also needs to be copied as part of the target images
is missing, but is included in the image formats a
little further down, so add it to the instructions.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
|
|
This adds initial support for the Toradex Verdin AM62P module.
The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a
Gigabit Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC,
an I2C EEPROM, an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module.
These specific changes adds support for Toradex Verdin AM62P Quad 2GB WB
IT module.
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
|
|
It is useful to be able to edit text, e.g. to allow the user to edit the
environment or the command-line arguments for the OS.
Add the beginnings of an implementation. Future work is needed to finish
this: keypress handling and scrolling. For now it just displays the
text.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add support for left, right and centred alignment for text, in the
horizontal dimension.
Also support top, bottom and centred in the vertical dimension, for the
text object as a whole.
Alignment is not yet implemented for images. It has no meaning for
menus. A textline object uses a text object internally, so alignment
is supported there.
Provide some documentation to explain how objects are positioned.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is useful to be able to draw a box around elements in the menu. Add
support for an unfilled box with a selectable thickness.
Note that there is no support for selecting the colour for any expo
objects yet.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rasmus Villemoes <ravi@prevas.dk> says:
This started as a rather simple patch, 1/12, adding the ability to
more conveniently do regex matching in shell.
But with that, it became very easy to see what the slre library can
and especially what it cannot do, and that way I found both outright
bugs and a "wow, doesn't it support that syntax" gotcha. I couldn't
find any tests ('git grep slre -- test/' was empty), so I added a
small test suite and tweaked slre.c.
Link: https://lore.kernel.org/r/20250513084034.654865-1-ravi@prevas.dk
|
|
Add documentation for the test command, including the newly added =~
operator and some gotchas wrt. the numeric comparisons.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
Describe the new subcommands and how they should be used in a normal
workflow.
Note that the naming of branches is very rigid, or 'opinionated' in
marketing terms. Patman can track a single branch for each version of a
series and they must all be named the same, except for the
version-number suffix. Version 1 series have no suffix.
This description is fairly bare-bones but should be enough for some
initial testing and comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function is sometimes useful outside tests. Also it can affect how
terminal output is done, e.g. whether ANSI characters should be emitted
or not.
Move it out of the test_util package and into terminal.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
The last platform to enable this driver was removed in 2019. Remove this
unused code and documentation now.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Include these function so they can be browsed in the API docs. Exclude
END since it causes a warning, which becomes an error:
./include/efi_device_path.h:22: warning: cannot understand function
prototype: 'const struct efi_device_path END; '
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
