summaryrefslogtreecommitdiff
path: root/drivers/fpga
AgeCommit message (Collapse)Author
2022-07-26fpga: zynqmp: support loading encrypted bitfilesAdrian Fiergolski
Add supporting new compatible string "u-boot,zynqmp-fpga-enc" to handle loading encrypted bitfiles. This feature requires encrypted FSBL, as according to UG1085: "The CSU automatically locks out the AES key, stored in either BBRAM or eFUSEs, as a key source to the AES engine if the FSBL is not encrypted. This prevents using the BBRAM or eFUSE as the key source to the AES engine during run-time applications." Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-14-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: zynqmp: support loading authenticated imagesOleksandr Suvorov
Add supporting new compatible string "u-boot,zynqmp-fpga-ddrauth" to handle loading authenticated images (DDR). Based on solution by Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Link: https://lore.kernel.org/r/20220722141614.297383-13-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: zynqmp: add bitstream compatible checkingOleksandr Suvorov
Check whether the FPGA ZynqMP driver supports the given bitstream image type. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-12-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: zynqmp: reduce zynqmppl_load() codeOleksandr Suvorov
Reduce the function code by calling xilinx_pm_request() once only. Use the same variable bsize_req to store either bstream size in bytes or an address of bstream size according to a type required by the firmware version. Remove obsolete debug(). Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-11-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: xilinx: pass compatible flags to load() callbackOleksandr Suvorov
These flags may be used to check whether an FPGA driver is able to load a particular FPGA bitstream image. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-10-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: add fpga_compatible2flagOleksandr Suvorov
Add a "compatible" string to binary flag converter, which uses a callback str2flag() of given FPGA driver if available. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-8-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: pass compatible flags to fpga_load()Oleksandr Suvorov
These flags may be used to check whether an FPGA driver is able to load a particular FPGA bitstream image. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-7-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: xilinx: pass compatible flags to xilinx_load()Oleksandr Suvorov
This flag is used to check whether a Xilinx FPGA driver is able to load a particular FPGA bitstream image. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-6-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: zynqmp: add str2flags callOleksandr Suvorov
Add a call to convert FPGA "compatible" string to a binary flag. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-5-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: add option for loading FPGA secure bitstreamsOleksandr Suvorov
It allows using this feature without enabling the "fpga loads" command. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Co-developed-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Tested-by: Ricardo Salveti <ricardo@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-2-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: Convert SYS_FPGA_PROG_FEEDBACK to KconfigAlexander Dahl
This converts the following to Kconfig: SYS_FPGA_PROG_FEEDBACK Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20220721133122.32428-3-ada@thorsis.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: Convert SYS_FPGA_CHECK_CTRLC to KconfigAlexander Dahl
After commit 8cca60a2cbf2 ("Kconfig: Remove some symbols from the whitelist") downstream builds failed for boards setting this in include/configs/… Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20220721133122.32428-2-ada@thorsis.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-11Merge branch 'next'Tom Rini
2022-07-01socfpga: arria10: Wait for fifo empty after writing bitstreamPaweł Anikiel
For some reason, on the Mercury+ AA1 module, calling fpgamgr_wait_early_user_mode immediately after writing the peripheral bitstream leaves the fpga in a broken state (ddr calibration hangs). Adding a delay before the first sync word is written seems to fix this. Inspecting the fpgamgr registers before and after the delay, imgcfg_FifoEmpty is the only bit that changes. Waiting for this bit (instead of a hardcoded delay) also fixes the issue. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-01socfpga: arria10: Improve bitstream loading speedPaweł Anikiel
Apply some optimizations to speed up bitstream loading (both for full and split periph/core bitstreams): * Change the size of the first fs read, so that all the subsequent reads are aligned to a specific value (called MAX_FIRST_LOAD_SIZE). This value was chosen so that in subsequent reads the fat fs driver doesn't have to allocate a temporary buffer in get_contents (assuming 8KiB clusters). * Change the buffer size to a larger value when reading to ddr (but not too large, because large transfers cause a stack overflow in the dwmmc driver). Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28Convert CONFIG_FPGA_STRATIX_V to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FPGA_STRATIX_V Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-17arm: socfpga: arria10: Enable double peripheral RBF configurationTien Fong Chee
Double peripheral RBF configuration are needed on some devices or boards to stabilize the IO configuration system. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-02-23Merge tag 'xilinx-for-v2021.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name
2021-02-23fpga: zynqpl: fix buffer alignmentMichael Walle
Due to pointer arithmetic, "sizeof(u32) * ARCH_DMA_MINALIGN" is subtracted. It seems that the original intention was to just subtract ARCH_DMA_MINALIGN. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-15image: Adjust the workings of fit_check_format()Simon Glass
At present this function does not accept a size for the FIT. This means that it must be read from the FIT itself, introducing potential security risk. Update the function to include a size parameter, which can be invalid, in which case fit_check_format() calculates it. For now no callers pass the size, but this can be updated later. Also adjust the return value to an error code so that all the different types of problems can be distinguished by the user. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Bruce Monroe <bruce.monroe@intel.com> Reported-by: Arie Haenel <arie.haenel@intel.com> Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-15arm: socfpga: soc64: Add ATF support for FPGA reconfig driverChee Hong Ang
In non-secure mode (EL2), FPGA reconfiguration driver calls the SMC/PSCI services provided by ATF to configure the FPGA. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2020-10-09arm: socfpga: agilex: Enable FPGA Full Reconfiguration supportChee Hong Ang
Enable FPGA full reconfiguration support with Intel FPGA SDM Mailbox driver for Agilex. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09fpga: intel_sdm_mb: Add watchdog resetChee Hong Ang
Ensure watchdog reset is not triggered if the fpga reconfiguration is taking too long. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM MailboxChee Hong Ang
Rename Stratix10 FPGA driver to Intel FPGA SDM Mailbox driver because it is using generic SDM (Secure Device Manager) Mailbox interface shared by other platform (e.g. Agilex) as well. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-09-23fpga: zynqmp: Protect zynqmp_loads() for SPLMichal Simek
if conditions should match. Fixes: a18d09ea384f ("fpga: zynqmp: Add secure bitstream loading for ZynqMP") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23fpga: zynqmp: Get rid of ZYNQMP_SIP_SVC* macrosMichal Simek
There is no need to use these macros because enum pm_api_id can be used instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-20xilinx: zynqmp: synchronize firmware call return payloadIbai Erkiaga
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the firmware driver. Additionally fixes payload buffer declarations without macro usage Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-06-24arm64: xilinx: Print fpga error value in hexT Karthik Reddy
Fpga returns error value when fails, error status should be printed in hex format. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Flush dcache only for non-bitstream dataT Karthik Reddy
In case of aes decryption destination address range must be flushed before transferring decrypted data to destination. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Check if aes engine is enabledIbai Erkiaga
AES engine cannot be used if has not been enabled at boot time with an encrypted boot image. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Check fpga config completionT Karthik Reddy
This patch checks fpga config completion when a bitstream is loaded into PL. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24fpga: zynqpl: Correct PL bitstream loading sequence for zynqaesSiva Durga Prasad Paladugu
Correct the PL bitstream loading sequence for zynqaes command by clearing the loaded PL bitstream before loading the new encrypted bitstream using the zynq aes command. This was done by setting the PROG_B same as in case of fpgaload commands. This patch fixes the issue of loading the encrypted PL bitstream onto the PL in which a bitstream has already been loaded successfully. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to udelay()Simon Glass
Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-24arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request()Michal Simek
Remove macros which use PM_SIP_SVC offset and convert invoke_smc() to xilinx_pm_request() which do calculation with PM_SIP_SVC already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: versal: Rename versal_pm_request to xilinx_pm_requestMichal Simek
Use generic name instead of Versal specific because this should be also used on ZynqMP. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: xilinx: Move firmware functions from platform to driverMichal Simek
versal_pm_request() and invoke_smc() are almost the same. Only one difference is that versal_pm_request is adding PM_SIP_SVC offset to api_id. The patch is moving platform implementation to firmware driver code for synchronization. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-28 13:35:26 +0000