| Age | Commit message (Collapse) | Author |
|---|
|
ESS clock is the Ethernet Subsystem clock, so lets add it as its
already configured by SBL1.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Add Kconfig and Makefile entries for this driver now that it can build
for U-Boot.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Refactor initialization to use U-Boot's driver model and API.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Port over the regulator ops to U-Boot's regulator API. Add back the
pmic5 mode map using U-Boot dm_regulator_mode API and adjust the
pmic5_pldo and pmic5_pldo_lv definitions. No functional changes.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Initially just include the few regulators needed for the RB5 board.
Others can be added back as-needed.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Switch to our linear_range helpers and remove unused/unsupported
linux-isms.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import struct linear_range() and builder macro from Linux regulator
core.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Remove unused/unsupported Linux headers and add necessary U-Boot ones.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import the driver from Linux 6.10-rc6.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add Kconfig / Makefiles to build rpmh and cmd-db drivers.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Fix build errors, add some debug logging.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
A lot of the features in here are only relevant when running
multi-threaded with interrupts. Drop everything except what we need to
run single-threaded with a single TCS (which is all the rpmh-rsc
framework in U-Boot supports).
Keep rpmh_write_async() for simplicity and make it wrap the regular
rpmh_write().
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Drop unused/unsupported Linux headers and add dm/device.h for U-Boot.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Minor adjustments to fix building with U-Boot and work correctly as a
synchronous driver without interrupts. RPMh is fast enough that we can
get away with just firing off requests and assuming they complete.
U-Boot behaviour changes are annotated with a "U-Boot:" comment.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Rework the rpmh-rsc initialization to use U-Boot's driver model and
initialize cmd-db.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Remove unsupported / unused Linux headers and add those needed for
U-Boot.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Since U-Boot is single threaded, we can avoid most of the complexity
that comes with handling more than one in-flight TCS. Drop all the rpmh
code associated with multi-threading as we'll instead wait for a
response on each TCS.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Keep the header pointer in the .data section so we don't initialize it
again after relocation, adjust cmd_db_get_header() to work with the
U-Boot API, and skip validating the header since all cmd-db users are
children of the rpmh-rsc and those children will only probe if cmd-db
initializes successfully.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Integrate cmd-db into the U-Boot driver model.
This is just a wrapper around an in-memory database, so we just need to
get the address and validate that cmd-db is there.
Since cmd_db_header will be stored in the .data section we can skip
bind if it's already set.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Due to our simpler rpmh-rsc driver and lack of debugfs, we don't need
quite a few cmd-db functions, just drop them.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Replace unused/unsupported Linux headers with appropriate U-Boot
alternatives.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Import RPMh and cmd-db framework from Linux 6.10-rc6.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Qualcomm platforms may have drivers that bind to reserved memory nodes
(cmd-db [1] and smem [2]) which are relevant to U-Boot. Include
/reserved-memory in dm_extended_scan() so that these will be handled
correctly.
[1]: https://www.kernel.org/doc/Documentation/devicetree/bindings/reserved-memory/qcom%2Ccmd-db.yaml
[2]: https://www.kernel.org/doc/Documentation/devicetree/bindings/soc/qcom/qcom%2Csmem.yaml
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21728
- Conversions to DM_I2C and DM_SERIAL.
- Support for I2C3 and PWM1 for the imx6q clock driver.
- Improvements for udoo-neo
- Describe the i.MX93 CPU clocks in the devicetree to fix CPU clock printing
- Fix for SPI and NANC clk-imx8mn clock driver
|
|
Enabling CONFIG_CMD_PWM, and consequently CONFIG_DM_PWM, causes the pwm
command to fail due to a missing clock.
=> pwm enable 0 0
Enable clock-controller@20c4000 failed
Failed to enable per_clk
pwm: '0' not found
Command 'pwm' failed: Error -2
Note that it is trivial to also add the clocks for PWM2, PWM3, and PWM4.
However, I only tested PWM1 and thus only added the clock for that
signal.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
|
|
Commit 727fa4539ca2 ("clk: Add support for I2C clocks on NXP's imx6q SoC
which use CCF") added I2C clocks for I2C1 and I2C2, but not I2C3.
Consequently, devices using I2C3 fail after enabling CONFIG_CLK_IMX6Q
and thus CONFIG_CLK. Therefore, this commit adds the last I2C clock.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
|
|
The arrays containing the mux selectors need to be of const pointer
to const char.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
The arrays containing the mux selectors need to be of const pointer
to const char.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
The arrays containing the mux selectors need to be of const pointer
to const char.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
The osc_24m is the clock-output-name and not the one that
is used as internal name reference from the strcmp. The clock
that use osc_24m, will not be able to reparent it as they should.
We need anyway register the osc_24m clock fixed factor in the clock
tree.
Fixes: 710c4ffb890 ("clk: imx: clk-imx8mn add gpmi nand clocks")
Fixes: 85b1c11989c ("clk: imx: Add ECSPI to iMX8MN")
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
