summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2015-11-12nios2: rename board nios2-generic to 3c120_devboardThomas Chou
Rename board nios2-generic to 3c120_devboard. Since nios2 is converted to driver model and device tree control of u-boot, the nios2-generic board directory is removed. We can rename the board back to a real board name. Now the boards maintained in u-boot mainline are the same as Linux kernel, namely 3c120 and 10m50. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2015-11-12nios2: add 10m50 devboard supportThomas Chou
Add 10m50 devboard support. It is based on the Golden Hardware Reference Design (GHRD), available at, http://rocketboards.org/foswiki/view/Documentation/ AlteraMAX1010M50RevCDevelopmentKitLinuxSetup Though we supported only one nios2-generic board in the past. Now, with the removal of the nios2-generic board dir, adding new nios2 boards to u-boot is easier than before. It should be helpful to add those boards supported in Linux mainline. There are only two such nios2 boards, the 3c120 devboard and 10m50 devboard. The nios2-generic is actually 3c120, and should restore the name. The 10m50 is this one. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12nios2: nios2-generic: do not allocate rx buf in net.cThomas Chou
Do not allocate rx buf in net.c, because altera_tse allocates its own rx buf in driver. This can save 6KB memory. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-12nios2: use cfi flash driver modelThomas Chou
Use cfi flash driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-10ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhereStephen Warren
Now that we have solved the problems that prevented this feature from being enabled, enable it everywhere. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-11-10Revive OpenRD targetsAlbert ARIBAUD
Revert commit 7a2c1b13 which dropped OpenRD boards. Assume maintainership of OpenRD. Remove OpenRD from scrapyard. Switch OpenRD to generic board. Switch to Thumb build. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-10tricorder: switch to CONFIG_SYS_THUMB_BUILDAlbert ARIBAUD
The tricorder and tricorder_flash boards have grown too big. Reduce their size by building them with CONFIG_SYS_THUMB_BUILD. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-10stm32f429-discovery: add CONFIG_SYS_THUMB_BUILDAlbert ARIBAUD
This target is ARMv7-M therefore can only build for Thumb, but it did not #define CONFIG_SYS_THUMB_BUILD, so the U-Boot code did not know it had to build for Thumb(2), not ARM. This patch is binary-invariant: builds of stm32f429-discovery with and without this patch were compared and found to differ only by their U-Boot version strings. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-06nios2: trim CONFIG_SYS_MEMTEST_ENDThomas Chou
Trim CONFIG_SYS_MEMTEST_END location. CONFIG_SYS_MONITOR_LEN Reserving 256k for U-Boot at: d7fc0000 CONFIG_ENV_SIZE CONFIG_SYS_MALLOC_LEN Reserving 256k for malloc() at: d7f80000 0x10000 for the rest Reserving 68 Bytes for Board Info at: d7f7ffbc Reserving 208 Bytes for Global Data at: d7f7feec Reserving 12000 Bytes for FDT at: d7f7d00c Stack Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-06nios2: trim CONFIG_SYS_MALLOC_LENThomas Chou
Trim CONFIG_SYS_MALLOC_LEN size, because CONFIG_ENV_SIZE is included to total memory allocation in common.h, Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06nios2: remove CONFIG_SYS_INIT_SP macroThomas Chou
Remove CONFIG_SYS_INIT_SP macro, as the initial stack is set to below the u-boot code. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06nios2: remove CONFIG_SYS_MALLOC_BASE macroThomas Chou
Remove CONFIG_SYS_MALLOC_BASE macro, as it is not used by the generic board. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06nios2: clean up macros that do not need a value in board headerThomas Chou
Clean up macros that do not need a value as suggested by Marek. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2015-11-06nios2: use dram bank in board infoThomas Chou
Use dram bank in board info, so that it displays correct memory values in bdinfo command. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-11-05Merge git://git.denx.de/u-boot-samsungTom Rini
2015-11-05Merge git://git.denx.de/u-boot-usbTom Rini
2015-11-04Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2015-11-04mpc85xx: Add support for the Varisys Cyrus boardAndy Fleming
This board runs a P5020 or P5040 chip, and utilizes an EEPROM with similar formatting to the Freescale P5020DS. Large amounts of this code were developed by Adrian Cox <adrian at humboldt dot co dot uk> Signed-off-by: Andy Fleming <afleming@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-04arm: zynq: Move serial driver to driver modelSimon Glass
Update this driver to use driver model and change all users. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04arm: zynq: Use separate device tree instead of embeddedSimon Glass
Production boards should not use CONFIG_OF_EMBED. Fix this for the Zybo boards. The image to use now becomes u-boot-dtb.bin. For example, the .bif file should contain a line like: [load = 0x04000000,startup=0x04000000]/path/to/u-boot-dtb.bin instead of: [load = 0x04000000,startup=0x04000000]/path/to/u-boot.bin When device tree is enabled we need to load u-boot-dtb.img. Change the settings so that SPL does the right thing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04zynq-common: Define CONFIG_SYS_I2C_ZYNQ based on board configSiva Durga Prasad Paladugu
Enable CONFIG_SYS_I2C_ZYNQ only if it has either I2C0 or I2C1 enabled in a board config.This fixes the issue of i2c error during board init if board specific doesnt have either I2C0 or I2C1. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-03ARM: dra7xx_evm: Add DFU support for qspi flashVignesh R
This adds support to update firmware on qspi flash using DFU. On device: => setenv dfu_alt_info ${dfu_alt_info_qspi} => dfu 0 sf 0:0 On host: $ sudo dfu-util -l $ sudo dfu-util -D MLO -a MLO $ sudo dfu-util -D u-boot.img -a u-boot.img Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-03arm: at91: reworked meesc board supportDaniel Gorsulowski
Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
2015-11-02T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3Codrin Ciubotariu
On T1040D4RDB board, u-boot fails to connect port FM1@DTSEC3 to the Ethernet PHY because the wrong PHY address is used. Also, T1040D4RDB supports SGMII on one port only. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02powerpc/t1040qds: enable peripheral clock for eSDHCYangbo Lu
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02powerpc/t1040qds: enable adapter card type identification supportYangbo Lu
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.Przemyslaw Marczak
This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-01ARM: at91: sama5: change the environment address to 0x6000Josh Wu
As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5 boards is bigger than 16k (0x4000). That will overlap the U-Boot environment. So I move environment to 0x6000. And reduce its size as well. Following shows the size of the spl binaries (v2015.04 vs v2015.07): % ls v2015.04/*spi*spl.bin -l | awk '{print $5,$(NF)}' 15540 v2015.04/at91sam9n12ek_spiflash_defconfig_u-boot-spl.bin 15704 v2015.04/at91sam9x5ek_spiflash_defconfig_u-boot-spl.bin 16064 v2015.04/sama5d3xek_spiflash_defconfig_u-boot-spl.bin 16304 v2015.04/sama5d4ek_spiflash_defconfig_u-boot-spl.bin 16304 v2015.04/sama5d4_xplained_spiflash_defconfig_u-boot-spl.bin % ls v2015.07/*spi*spl.bin -l | awk '{print $5,$(NF)}' 16136 v2015.07/at91sam9n12ek_spiflash_defconfig_u-boot-spl.bin 16300 v2015.07/at91sam9x5ek_spiflash_defconfig_u-boot-spl.bin 16664 v2015.07/sama5d3xek_spiflash_defconfig_u-boot-spl.bin 16904 v2015.07/sama5d4ek_spiflash_defconfig_u-boot-spl.bin 16904 v2015.07/sama5d4_xplained_spiflash_defconfig_u-boot-spl.bin The gcc version is: gcc 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Bo Shen <voice.shen@gmail.com>
2015-10-30Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2015-10-30ls102xa: Adjust some macros for SD boot on LS1021A QDS boardAlison Wang
As more features are added for SD boot on LS1021A QDS board, the size of U-Boot is larger. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS needs to be adjusted to a suitable value. Starting address of the malloc pool used in SPL needs to be adjusted too, or it will occupy the address u-boot loads. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30configs: ls1021atwr: Enable ID EEPROM for SD bootYao Yuan
I2C1 can work on ls102xa rev2.0 SD boot, so add ID EEPROM for SD boot. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffffAlison Wang
As 3G/1G user/kernel memory split is used on LS1021A, the Linux kernel fails to access the device tree blob on boot. The reason is that u-boot relocates the device tree blob into high memory when booting the kernel and the kernel is unable to access the blob. To avoid this issue, fdt_high is set to the value of 0xffffffff. The device tree blob will not get relocated and is still in low memory to make it accessible to the kernel. For the same reason, initrd_high is set to the value of 0xffffffff too. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043a: Enable secondary coresHou Zhiqiang
After the secondary cores enter U-Boot, use CONFIG_ARMV8_MULTIENTRY to make secondary cores excute in spin loop. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043ardb: Add sd boot supportGong Qianyu
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardbYangbo Lu
This patch adds esdhc support for ls1043ardb. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043a: Add Fman supportShaohui Xie
Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043ardb: Add nand boot supportGong Qianyu
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8/ls1043ardb: Add LS1043ARDB board supportMingkai Hu
LS1043ARDB Specification: ------------------------- Memory subsystem: * 2GByte DDR4 SDRAM (32bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * XFI 10G port * QSGMII with 4x 1G ports * Two RGMII ports PCIe: * PCIe2 (Lanes C) to mini-PCIe slot * PCIe3 (Lanes D) to PCIe slot USB 3.0: two super speed USB 3.0 type A ports UART: supports two UARTs up to 115200 bps for console Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
2015-10-29armv8/fsl_lsch3: Change arch to fsl-layerscapeMingkai Hu
There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv7/ls1021a: move ns_access to common fileMingkai Hu
Config Security Level Register is different between different SoCs, so put the CSL register definition into the arch specific directory. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29common/board_f.c: change the macro name and remove it for PPC platformsGong Qianyu
For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIAShaohui Xie
To support on board Aquantia's PHY AQR405. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-28Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2015-10-27ocotea: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27taishan: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27ebony: DropTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-27taihu: RemoveTom Rini
This board has not compiled for me for quite some time due to size constraints, remove. Cc: John Otken <jotken@softadvances.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2015-10-26arm: ls1021a: Add QSPI or IFC support in SD bootAlison Wang
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26QE: modify the address of qe ucodeZhao Qiang
The address of uboot changed, so change qe ucode Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIASScott Wood
This will allow OF-based earlycon to be used once the appropriate aliases are added to the device tree and kernel support is fixed. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 02:14:12 +0000