| Age | Commit message (Collapse) | Author |
|---|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250310
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/25060
Usb gadget:
- Remove legacy CONFIG_USB_DEVICE
- Remove legacy usbtty driver
|
|
The lone user of the legacy USB device framework have been removed for
some time. Remove the final parts of the code that were missed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250227205101.4127604-1-trini@konsulko.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Structure jmp_buf_data provides the underlying format of jmp_buf, which
we actually don't care about. Clean up existing code to use the standard
jmp_buf type. This introduces no functional change.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Separate setjmp.h into an architecture independent part and an architecture
specific part. This simplifies moving from using struct jmp_buf_data
directly to using type jmp_buf in our code which is the C compliant way.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Add support for multiple efi_net_obj structs in efi_net.c. This comes
in preparation for an EFI network driver supporting multiple network
interfaces. For now the EFI network stack still registers a single ethernet
udevice as an EFI network device even if multiple are present, namely
the one that was the current device at the moment of EFI initialization.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
Add a dhcp cache to store the DHCP ACKs received by the U-Boot network
stack.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
The coomand bootefi calls efi_init_obj_list to do the efi set up
before launching an .efi payload, but efi_init_obj_list is called
only once. There are some initializations which depend on the
environment and should be done each time a payload gets launched and
not only once. A motivation for this changes is the following order
of events:
1. Launch an EFI application (e.g. bootefi hello)
2. Change the ip address
3. Launch another application which uses the pxe protocol
As the EFI pxe protocol was initialized when the handles
for efi net were created in 1., the ip was hardcoded there.
In this example, another possibility would be to make a callback for ip
address changes to go all the way up to efi_net.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
EFI_FILE_PROTOCOL.SetInfo()."
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
|
|
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
|
|
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
|
|
The function is only used in the efi_memory.c module.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <1425075683@qq.com>
Acked-by: Liya Huang <1425075683@qq.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
For EFI runtime services, we manage to preserve string literals
by placing the .efi_runtime section just before .data and preserving
it when marking the runtime memory by marking surrounding boottime
code as runtime. This is ok for now but will break if we update any
linker scripts and decouple .text and .runtime sections.
So let's define the strings we used to compare in the appropriate
section for runtime services
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
|
|
After having been compared to a NULL value at efi_disk.c:426,
pointer 'part_info' is dereferenced at efi_disk.c:534.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Move default eventlog size from efi to tpm for using in both
efi and measured boot.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Finish off the implementation so it is possible to boot an EFI app over
a network.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Rather than setting up the global variables and then making the call,
pass them into function directly. This cleans up the code and makes it
all a bit easier to understand.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This code is only needed if an invalid image/device path is passed in.
Move the code out to a caller where this can be dealt with. The normal
flow will provide these parameters.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This uses a few global variables at present. With the bootflow we have
the required parameters, so add a function which accepts these. Update
the existing function to call the new one with the globals.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Provide these globals as parameters to this function, on the way to
making it possible to start an image without relying on the globals.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
If a board has a strict size limit, disable
* Unicode capitalization and
* HII protocols
by default to reduce the image size.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
The log category should be LOGC_EFI all over the EFI sub-system.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
When logging running an image, e.g. `bootefi hello` the indent is not
correctly reset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Simon Glass <sjg@chromium.org> says:
The current UPL spec[1] has been tidied up and improved over the last
year, since U-Boot's original UPL support was written.
This series includes some prerequisite patches needed for the real UPL
patches. It is split from [2]
[1] https://github.com/UniversalPayload/spec/tree/3f1450d
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=438574&state=*
Link: https://lore.kernel.org/r/20250111000029.245022-1-sjg@chromium.org
|
|
The add_u_boot_and_runtime() function paints with a broad brush,
considering all of the memory from the top of U-Boot stack to
gd->ram_top as EFI_RUNTIME_SERVICES_CODE
This is fine, but we need to make sure we don't add a separate entry for
any ACPI tables in this region (which happens when bloblist is used for
tables). Otherwise the memory map looks strange and we get a test
failure on qemu-x86 (only) for the 'virtual address map' test.
Good map:
Type Start End Attributes
================ ================ ================ ==========
CONVENTIONAL 0000000000000000-00000000000a0000 WB
RESERVED 00000000000a0000-00000000000f0000 WB
RUNTIME DATA 00000000000f0000-00000000000f2000 WB|RT
RESERVED 00000000000f2000-0000000000100000 WB
CONVENTIONAL 0000000000100000-0000000005cc7000 WB
BOOT DATA 0000000005cc7000-0000000005ccc000 WB
RUNTIME DATA 0000000005ccc000-0000000005ccd000 WB|RT
BOOT DATA 0000000005ccd000-0000000005cce000 WB
RUNTIME DATA 0000000005cce000-0000000005cf0000 WB|RT
BOOT DATA 0000000005cf0000-0000000006cf5000 WB
RESERVED 0000000006cf5000-0000000006cfa000 WB
ACPI RECLAIM MEM 0000000006cfa000-0000000006d1c000 WB
RESERVED 0000000006d1c000-0000000006f35000 WB
RUNTIME CODE 0000000006f35000-0000000006f37000 WB|RT
RESERVED 0000000006f37000-0000000008000000 WB
RESERVED 00000000e0000000-00000000f0000000 WB
Bad map: (with BLOBLIST_TABLES but without this patch):
Type Start End Attributes
================ ================ ================ ==========
CONVENTIONAL 0000000000000000-00000000000a0000 WB
RESERVED 00000000000a0000-00000000000f0000 WB
ACPI RECLAIM MEM 00000000000f0000-00000000000f1000 WB
RESERVED 00000000000f1000-0000000000100000 WB
CONVENTIONAL 0000000000100000-0000000005ca5000 WB
BOOT DATA 0000000005ca5000-0000000005caa000 WB
RUNTIME DATA 0000000005caa000-0000000005cab000 WB|RT
BOOT DATA 0000000005cab000-0000000005cac000 WB
RUNTIME DATA 0000000005cac000-0000000005cce000 WB|RT
BOOT DATA 0000000005cce000-0000000006cd3000 WB
RUNTIME DATA 0000000006cd3000-0000000006cd5000 WB|RT
BOOT DATA 0000000006cd5000-0000000006cf4000 WB
RESERVED 0000000006cf4000-0000000006cf9000 WB
ACPI RECLAIM MEM 0000000006cf9000-0000000006ce6000 WB
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In reworking the BLK usage in Kconfig, I found there's a few issues with
EFI_LOADER=y and BLK=n. In general, we can easily say that
lib/efi_loader/efi_file.c also should only be built with CONFIG_BLK.
That however leaves the bootmgr code, eficonfig code and then parts of
efi_device_path.c, efi_boottime.c and efi_setup.c which functionally
depend on BLK. While these calls can be if'd out, I'm unsure if the
result is usable. So rather than leave that buildable and imply that it
is, I'm leaving that combination non-buildable and commenting that
EFI_LOADER depends on BLK in the Kconfig currently.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This function is not called from outside this file and has no entry in
the header file, so mark it static.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Move this code into a function so it can be called from elsewhere.
Note that the recently added network code uses the same
'global variable' approach. It could use a separate clean-up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Except for the architecture specific lines ARM and RISC-V can use the same
linker script. Move the common lines to an include.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
This is done so that the device path protocol interface of the network
device can be changed internally by u-boot when a new bootfile gets
downloaded.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The fix provided by 997fc12ec91 is actually introducing
a buffer overrun, and the overrun is effective if the
memory after the reloc section is not zeroed.
Probably that's why this bug is not always noticeable.
The problem is that 8-bytes 'rel' pointer can be 4-bytes aligned
according to the PE Format, so the actual relocate function can
take values after the reloc section.
One example is the following dump from the reloc section:
bce26000: 3000 0000 000c 0000 0000 0000 0000 0000
bce26010: 7c00 9340 67e0 f900 1c00 0ea1 a400 0f20
This section has two relocations at offset bce26008 and bce2600a,
however the given size (rel_size) for this relocation is 16-bytes
and this is coming form the efi image Misc.VirtualSize, so in this
case the 'reloc' pointer ends at affset bce2600c and is taken as
valid and this is where the overflow is.
In our system we see this problem when we are starting the
Boot Guard efi image.
This patch is fixing the overrun while preserving the fix done
by 997fc12ec91.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
When the TCG2 protocol installation fails, we are trying to remove
all the objects we created in tcg2_uninit().
However, there are cases when this function runs before the config
table was installed. So instead of printing an error unconditionally
check against EFI_NOT_FOUND and don't print anything if the table wasn't
installed to begin with.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We should not write messages in UEFI API functions. This may lead to
incorrect screen layout in UEFI application.
For single statements after if clause we don't need braces.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
lmb_alloc_addr() is just calling lmb_alloc_addr_flags() with LMB_NONE
There's not much we gain from this abstraction, so let's remove the
latter, add a flags argument to lmb_alloc_addr() and make the code a
bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Prepare v2025.01-rc4
|
|
The gen_v5_guid() is a void and does no error checking with pointers
being available etc. Instead it expects all things to be in place to
generate GUIDs. If a board capsule definition is buggy and does not
define the firmware names when enabling capsule updates, the board will
crash trying to bring up the EFI subsystem.
Check for a valid firmware name before generating GUIDs.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Given that OF_LIBFDT is library functionality, the feature of EFI_LOADER
needs to select OF_LIBFDT rather than depend on it being already
enabled.
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/23707
With this pull request support for the EFI_HTTP_PROTOCOL and
EFI_IP4_CONFIG2 protocols are added. This allows EFI applications
to load files via HTTP.
UEFI:
add efi_dp_from_ipv4 function
add efi_net_set_addr, efi_net_get_addr functions
add support for HTTP device path
set EFI bootdevice device path to HTTP when loaded from wget
add support to send http requests and parse http headers
provide EFI_IP4_CONFIG2_PROTOCOL
provide EFI_HTTP_PROTOCOL
support IPv4() in device path to text protocol
provide unit tests for the HTTP and IPv4 Config2 protocols
Network:
zero terminate string with headers in wget_fill_info()
zero terminate string with headers in wget_lwip_fill_info()
pass port and server_name via wget_ctx in lwIP network stack
let wget_with_dns work with dns disabled
Others:
Add HTTP and IPV4 Config II protocols to UUID library functions.
|
|
Add an EFI HTTP driver. This commit implements the
EFI_HTTP_PROTOCOL and the EFI_HTTP_SERVICE_BINDING_PROTOCOL.
The latter is attached to the handle of th efi network
device. This is the same handle where snp, pxe, and ipconfig
are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
Add an implementation of the EFI_IP4_CONFIG2_PROTOCOL. The protocol
is attached to the handle of the efi network device. This is the same
handle where snp and pxe are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
Add network-stack agnostic way to send an http request and
parse http headers from efi drivers. This uses wget as a
backend and communicates with it via efi_wget_info.
The function efi_net_do_request allocates a buffer on behalf of an
efi application using efi_alloc and passes it to wget to receive
the data. If the method is GET and the buffer is too small, it
re-allocates the buffer based on the last received Content-Length
header and tries again. If the method is HEAD it just issues one
request. So issuing a HEAD request (to update Content-Length) and
then a GET request is preferred but not required.
The function efi_net_parse_headers parses a raw buffer containing
an http header into an array of EFI specific 'http_header' structs.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Add efi_dp_from_http to form a device path from HTTP. The
device path is the concatenation of the device path returned
by efi_dp_from_ipv4 together with an URI node and an END node.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
