| Age | Commit message (Collapse) | Author |
|---|
|
Check wget_info->buffer_size for overflow and do not clean the wget_info struct
on failure, let the owner of the struct handle the error. The latter is necesary
, e.g., for when a request fails because the provided buffer was too small.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
|
|
Changes:
* Fix initial send sequence always zero issue
* Use state machine close to RFC 9293. This should make TCP
transfers more reliable (now we can upload a huge array
of data from the board to external server)
* Improve TCP framework a lot. This should make tcp client
code much more simple.
* rewrite wget with new tcp stack
* rewrite fastboot_tcp with new tcp stack
It's quite hard to fix the initial send sequence (ISS) issue
with the separate patch. A naive attempt to fix an issue
inside the tcp_set_tcp_header() function will break tcp packet
retransmit logic in wget and other clients.
Example:
Wget stores tcp_seq_num value before tcp_set_tcp_header() will
be called and (on failure) retransmit the packet with the stored
tcp_seq_num value. Thus:
* the same ISS must allways be used (current case)
* or tcp clients needs to generate a proper ISS when
required.
A proper ISS fix will require a big redesing comparable with
a this one.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Changes:
* Avoid use net_server_ip in tcp code, use tcp_stream data instead
* Ignore packets from other connections if connection already created.
This prevents us from connection break caused by other tcp stream.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
no functional changes
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
This was marked as TODO in the code:
- Enable use of wget_with_dns even if CMD_DNS is disabled if
the given uri has the ip address for the http server.
- Move the check for CMD_DNS inside wget_with_dns.
- Rename wget_with_dns to wget_do_request
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
|
|
Commit 2dd076a9c1b4 ("net: wget: integrate struct wget_info into legacy
wget code") introduced function wget_fill_info() which retrieves the
headers from the HTTP server response. As we want to parse the string in
later patches we need to ensure that it is NUL terminated.
We must further check that wget_info->headers in not NULL.
Otherwise a crash occurs.
Fixes: 2dd076a9c1b4 ("net: wget: integrate struct wget_info into legacy wget code")
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
There are two wget_with_dns functions, one in the legacy network
stack and one in lwip, but the return values are not compatible.
This commit modifies the legacy version of wget_with_dns so that
the return values are compatible: 0 on success, otherwise a negative
error. This way wget_with_dns can be called in a network stack
agnostic way.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
Each wget request now fills the struct wget_info. The efi
bootdevice is now set conditionally to the set_bootdevice
variable in wget_info, and the same holds for lmb memory check.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
|
|
* Remove duplicate debug message in wget_connected()
* Correct typo 'Connctd'
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
After downloading a file with wget the file size may be needed in follow up
actions, e.g.
* write file to device
* calculate hash
Let wget set the environment variable filesize.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Jerome Forissier <jerome.forissier@linaro.org> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
|
|
wget followed by bootefi currently fails as follows:
U-Boot> wget 200000 192.168.0.30:helloworld.efi
Waiting for Ethernet connection... done.
HTTP/1.0 200 OK
Packets received 13, Transfer Successful
Bytes transferred = 12720 (31b0 hex)
U-Boot> bootefi 200000
No UEFI binary known at 200000
U-Boot>
Fix the problem by adding the missing efi_set_bootdev() call.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
wget_success() is used nowhere so remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from the wget command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
|
|
With the changes to make the LMB reservations persistent, the common
memory regions are being added during board init. Remove the
now superfluous lmb_init_and_reserve() function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
With the introduction of separate config symbols for the SPL phase of
U-Boot, the condition checks need to be tweaked so that platforms that
enable the LMB module in SPL are also able to call the LMB API's. Use
the appropriate condition checks to achieve this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
|
|
Enable this so that the tests run.
Fix a few warnings in the code so that CI passes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from all "net/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
If tcp_seq_num is wrap around, tcp_seq_num >= initial_data_seq_num
isn't satisfied and store_block() isn't called.
The condition has a wrap around issue, so it is fixed in this patch.
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reported-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Fabio Estevam <festevam@denx.de>
|
|
The server sends multiple packets without waiting for an ACK
by window control and if some packets are dropped,
wget will return an ACK including the dropped packets.
Following log indicates this issue.
wget_handler() wget: Transferring, seq=97bbdd4a, ack=30,len=580
wget_handler() wget: Transferring, seq=97bbedca, ack=30,len=580
First packet of TCP sequence number is 0x97bbdd4a.
Second packet of TCP sequence number should be 0x97bbe2ca,
however it is 0x97bbedca and returns its ACK, so the server
suppose that 0x97bbe2ca and 0x97bbedca are received appropriately.
In this case, 0x97bbe2ca was lost and the data of wget was broken.
In this patch, next_data_seq_num holds the next expected
TCP sequence number.
If the TCP sequence number different from next_data_seq_num,
trying to retransmit the packet.
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
|
|
Prepare v2024.01-rc6
|
|
Currently the wget command is hard wired to HTTP port 80. This is
inconvenient, as it is extremely easy to start trivial HTTP server
as an unprivileged user using e.g. python http module to serve the
files, but such a server has to run on one of the higher ports:
"
$ python3 -m http.server -d $(pwd) 8080
"
Make it possible to configure HTTP server port the same way it is
possible to configure TFTP server port, using environment variable
'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default
fallback port. This way, users can start their own trivial server
and conveniently download whatever files they need into U-Boot.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
|
|
This adds the URI device path option for 'boot add' subcommand.
User can add the URI load option for downloading ISO image file
or EFI application through network. Currently HTTP is only supported.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Current wget takes the target uri in this format:
"<http server ip>:<file path>" e.g.) 192.168.1.1:/bar
The http server ip address must be resolved before
calling wget.
This commit adds the utility function runs wget with dhs.
User can call wget with the uri like "http://foo/bar".
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
This introduces the valid range check to store the received
blocks using lmb. The same logic is implemented in tftp.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Make sure to stay within bounds, as a misbehaving HTTP server
can trigger a buffer overflow if not properly handled.
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Make following changes to unblock TCP fastboot support:
1. Implement being a TCP server support
2. Introduce dedicated TCP traffic handler (get rid of UDP signature)
3. Ensure seq_num and ack_num are respected in net_send_tcp_packet
function (make sure existing wget_cmd code is reflected with the fix)
Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
|
|
The compiler complains about the missing declaration of print_size():
net/wget.c:415:3: warning: implicit declaration of function ‘print_size’ [-Wimplicit-function-declaration]
Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
|
|
This commit adds a simple wget command that can download files
from http server.
The command syntax is
wget ${loadaddr} <path of the file from server>
Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
|
