| Age | Commit message (Collapse) | Author |
|---|
|
The issue described in https://github.com/psf/requests/pull/6655 has
been assigned as a security issue. While unlikely to be exploited in our
usage, update to the current release to fix it. Furthermore, upstream
has now moved on to v2.23.2 as the release to use which has all of the
issues resolved.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
According to UEFI v2.10 spec section 8.2.6, if a caller invokes the
SetVariables() service, it will produce a digest from hash(VariableName,
VendorGuid, Attributes, TimeStamp, DataNew_variable_content), then the
firmware that implements the SetVariable() service will compare the
digest with the result of applying the signer’s public key to the
signature. For EFI variable append write, efitools sign-efi-sig-list has
an option "-a" to add EFI_VARIABLE_APPEND_WRITE attr, and u-boot will
drop this attribute in efi_set_variable_int(). So if a caller uses
"sign-efi-sig-list -a" to create the authenticated variable, this append
write will fail in the u-boot due to "hash check failed".
This patch resumes writing the EFI_VARIABLE_APPEND_WRITE attr to ensure
that the hash check is correct. And also update the "test_efi_secboot"
test case to compliance with the change.
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
|
|
For pcr_read and pcr_extend commands allow the digest algorithm to be
specified by an additional argument. If not specified it will default to
SHA256 for backwards compatibility.
Additionally update test_tpm2.py for the changes in output in pcr_read
which now shows the algo and algo length in the output.
A follow-on to this could be to extend all PCR banks with the detected
algo when the <digest_algo> argument is 'auto'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Currently we have the option to tell the console code that we should
ignore the SPL banner. We also have an option to say that we can see it
a second time, and ignore it. However, some platforms such as TI AM64x
will have us see the SPL banner three times. Rather than add an
"spl3_skipped" option, rework the code. By default we expect to see the
banner once, but boards can specify seeing it as many times as they
expect to.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The image is not unloaded if a security violation occurs.
If efi_set_load_options() fails, we do not free the memory allocated for
the optional data. We do not unload the image.
* Unload the image if a security violation occurs.
* Free load_options if efi_set_load_options() fails.
* Unload the image if efi_set_load_options() fails.
Fixes: 53f6a5aa8626 ("efi_loader: Replace config option for initrd loading")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add read/write tests for optee_rpmb cmd.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Fix typos in test_eficonfig.py: %s/curren/current/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
|
|
Using uclass_get_name() reduces the code size.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
load_entry_point is not used.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Currently, all the capsules for the sandbox platform are generated at
the time of running the capsule tests. To showcase generation of
capsules through binman, generate all raw(non FIT payload) capsules
needed for the sandbox platform as part of the build. This acts as an
illustrative example for generating capsules as part of a platform's
build.
Make corresponding change in the capsule test's configuration to get
these capsules from the build directory.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
|
|
Add a test for reset commands which performs resetting of CPU, It does
COLD reset by default and WARM reset with -w option.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add test case for saveenv command in non-JTAG bootmode which saves the
u-boot environment variables in persistent storage.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
[1] https://www.kernel.org/doc/Documentation/process/license-rules.rst
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Link: https://lore.kernel.org/r/20240209192045.3961832-3-igor.opaniuk@foundries.io
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add test cases to verify the different type of secure boot images loaded
at DDR location for AMD's ZynqMP SoC. It also adds tests authentication
and decryption functionality using AES and RSA features for Zynq.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add gpio pins generic test for the set of gpio pin list to test various
gpio related functionality, such as the input, set, clear, and toggle,
it also tests the input and output functionality for shorted gpio pins.
This test depends on boardenv* configuration to define gpio pins names.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Update pygit2 and py to their latest versions. Even in the venv pygit2
still links against the system libgit2 library which is failing on
latest Arch Linux.
The py library also needs updating to fix a KeyNotFound exception during
test initialisation.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Provide a unit test for the smbios command.
Provide different test functions for QEMU, sandbox, and other systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add test cases for bootstage command to print the bootstage report, to
stash the data into memory and to unstash the data from memory.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
With commit 42c0e5bb054d ("test: Find leftovers after clean/mrproper")
we assume that we are performing out of tree builds. test_clean and
test_mrproper fail if the assumption isn't met.
However there are valid scenarios where tests run with in source builds
(i.e., test.py --build-dir=.).
Automatically skip cleanup tests in such scenarios to prevent false
positives.
Signed-off-by: Tobias Deiminger <tdmg@linutronix.de>
Reviewed-by: Harald Seiler <u-boot@rahix.de>
|
|
In practice, as this test defaults to enabled rather than disabled, too
many platforms now fail.
This reverts commit d8364738623ff47dd2321dd68da310abb58fe861.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
With newer versions of trace-cmd the report subcommand will have
different output from before if we do or do not pass -l. However, with
the -l flag passed our put is consistent here. This updates our regular
expressions and comments for this as well now.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Update packaging to be version 23.2 to match our Sphinx requirements.
This will let us build a pip cache out of both of our requirements.txt
files.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The version of pycryptodomex that we use is vulnerable to this CVE.
While not likely an issue for us, let us upgrade to be on the safe side.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add the following memory tests:
memtest_negative - To test mtest command by providing incorrect inputs
memtest_ddr - To test memory write-read-comparision for DDR memory
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add below test cases for i2c commands:
i2c_bus - To show i2c bus info,
i2c_dev - To set or show the current bus,
i2c_probe - To probe the i2c device,
i2c_eeprom - To test i2c eeprom device,
i2c_probe_all_buses - To list down all the buses and probes it
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Add below test cases for mii commands:
mii_info -To display MII PHY info
mii_list - To list MII devices
mii_set_device - To set MII device
mii_read - To reads register from MII PHY address
mii_dump - To display data from MII PHY address
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Add below test cases for mdio commands:
mdio_list - To list MDIO buses
mdio_read - To read PHY's register at <devad>.<reg>
mdio_write - To write PHY's register at <devad>.<reg>
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Maxim Uvarov <maxim.uvarov@linaro.org> says:
Add small net fixes prior lwip patches.
|
|
Printing net list is useful in CI log files.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Verifies shell variables are replaced by their values.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
5804ebfeb1ce ("test: hush: Test hush if/else") translated this test to a C test,
so this python file is no more needed.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Commit 51bb33846ad2 ("bootm: Support string substitution in
bootargs") introduced a feature of bootargs string substitution
and changed a flag used in bootm_process_cmdline_env() call
to be either true or false. With this flag value,
condition in bootm_process_cmdline()
`if (flags & BOOTM_CL_SUBST)` is never true
and process_subst() is never called.
Add a simple test to verify if substitution works OK.
Signed-off-by: Piotr Kubik <piotr.kubik@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Recently pylint has started to complain about:
No name 'fs_helper' in module 'tests' (no-name-in-module)
Due to:
from tests import fs_helper
However, we have:
test/py/tests/fs_helper.py
And since we do not want to add a dummy test/py/tests/__init__.py to
silence this warning we instead just disable it as needed.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Recently pylint has started to complain about:
No name 'fs_helper' in module 'tests' (no-name-in-module)
Due to:
from tests import fs_helper
However, we have:
test/py/tests/fs_helper.py
And since we do not want to add a dummy test/py/tests/__init__.py to
silence this warning we instead just disable it as needed.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Execute tftpput command for uploading files to a server and validate its
size & CRC32.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
To quote the author:
This series fixes an issue where the FAT type (FAT12, FAT16) is not
correctly detected, e.g. when the BPB field BS_FilSysType contains the
valid value "FAT ".
This issue occures, for example, if a partition is formatted by
swupdate using its diskformat handler. swupdate uses the FAT library
from http://elm-chan.org/fsw/ff/ internally.
See https://groups.google.com/g/swupdate/c/7Yc3NupjXx8 for a
discussion in the swupdate mailing list.
Please refer to the commit messages for more details.
1. Added bootsector checks
Most tests from https://www.win.tue.nl/~aeb/linux/fs/fat/fat-2.html
are added in the commit 'fs: fat: add bootsector validity check'.
Only the tests VIII, IX and X are not implemented.
I also checked the Linux kernel code (v6.6) and did not find any
checks on 'vistart->fs_type'. This is the reason why is skipped them
here.
See section '2. Size comparisons' for the impact on the binary size.
2. Size comparisons
I executed bloat-o-meter from the Linux kernel for an arm64
target (config xilinx_zynqmp_mini_emmc0_defconfig):
Comparison of the binary spl/u-boot-spl between master (rev
e17d174773e9ba9447596708e702b7382e47a6cf) and this patch
series (including the added validity checks of the boot sector):
add/remove: 0/0 grow/shrink: 1/1 up/down: 100/-12 (88)
Function old new delta
read_bootsectandvi 308 408 +100
fat_itr_root 444 432 -12
Total: Before=67977, After=68065, chg +0.13%
When compare the size of the binary spl/u-boot-spl between master this
series without the the validity checks of the boot sector:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-24 (-24)
Function old new delta
read_bootsectandvi 308 296 -12
fat_itr_root 444 432 -12
Total: Before=67977, After=67953, chg -0.04%
So the size of the spl on this arm64 target increases by 88 bytes for
this series. When i remove the validity check the size decreases by 24 bytes.
|
|
Ensure that a large FAT12 filesystem and a small FAT16 filesystem are
detected correctly.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
Without this commit it is only possible to create filesystem images
with a size granularity of 1MB.
This commit adds the option to create file systems with different
sizes, e.g 8.5MB.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
The tests fs_ext, fs_mkdir and fs_unlink support fat12 without
modifications.
The fs_basic test uses a partition that is too large for fat12, so it
is omitted here.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
This enables to implement tests for fat12 filesystem.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
Changes for complying to EFI spec §3.5.1.1
'Removable Media Boot Behavior'.
Boot variables can be automatically generated during a removable
media is probed. At the same time, unused boot variables will be
detected and removed.
Please note that currently the function 'efi_disk_remove' has no
ability to distinguish below two scenarios
a) Unplugging of a removable media under U-Boot
b) U-Boot exiting and booting an OS
Thus currently the boot variables management is not added into
'efi_disk_remove' to avoid boot options being added/erased
repeatedly under scenario b) during power cycles
See TODO comments under function 'efi_disk_remove' for more details
The original efi_secboot tests expect that BootOrder EFI variable
is not defined. With this commit, the BootOrder EFI variable is
automatically added when the disk is detected. The original
efi_secboot tests end up with unexpected failure.
The efi_secboot tests need to be modified to explicitly set
the BootOrder EFI variable.
squashfs and erofs ls tests are also affected by this modification,
need to clear the previous state before squashfs ls test starts.
Co-developed-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
