| Age | Commit message (Collapse) | Author |
|---|
|
test_extension.py assumes that no extension is known at test start.
This assumption is wrong because we do not come out of reboot.
A prior test may have already hunted for the extension bootdev.
Remove the invalid assert.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Jerome Forissier <jerome.forissier@linaro.org> says:
This short series adds the 'trace wipe' command which clears the trace
buffer, allowing to re-start a capture from scratch.
Link: https://lore.kernel.org/r/cover.1734093566.git.jerome.forissier@linaro.org
|
|
Test the newly added 'trace wipe' command.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Prepare v2025.01-rc5
|
|
The logic in get_details() retrieves the default source directory from
the Labgrid settings. This is convenient for interactive use, since it
allows pytests to be run from any directory and still find the source
tree.
However, it is not actually correct.
Gitlab sets the current directory to the source tree and expects that to
be used. At present it is ignored. The result is that Gitlab builds
whatever happens to be in the default source directory, ignoring the
tree it is supposed to be building.
Fix this by using the directory of the source tree, always. This is
obtained by looking at the grandparent of the conftest.py file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: bf89a8f1fc2 ("test: Introduce the concept of a role")
Tested-by: Tom Rini <trini@konsulko.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2025.04-rc1
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
|
|
Tom Rini <trini@konsulko.com> says:
Hey all,
This is picking up Simon's v5 of the above-named series and making a few
more changes so that the follow-up series I have leads to arm64 being
supported for almost all jobs. To quote Simon's cover letter:
All gitlab runners are currently amd64 machines. This series attempts to
create a docker image which can also support arm64 so that sandbox tests
can be run on it.
The TARGET_... environment variables for grub could perhaps be adjusted,
using the new variables, but I have not done that for now.
Adding to what Simon said, we now build grub for all architectures as
the reason to install it was to be able to use the binaries in QEMU.
That won't provide us with amd64 binaries on arm64 hosts so we can't use
that shortcut anymore.
Link: https://lore.kernel.org/r/20241127172247.1488685-1-trini@konsulko.com
|
|
When a timeout occurs while executing a command a 'Boot fail' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Boot fail: Marking connection bad - no other tests will run !
Add the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
When a timeout occurs while executing a command a 'Lab failure' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Lab failure: Marking connection bad - no other tests will run !
Add the word 'Timeout' and the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Simon Glass <sjg@chromium.org> says:
This series rebases and tidies up a series sent by Richard Weinberger
to use unprivileged code to build the test images.
Link: https://patchwork.ozlabs.org/project/uboot/list/?series=417786&state=*
Link: https://lore.kernel.org/r/20241121223217.330117-1-sjg@chromium.org
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
These are no-longer used. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The mkimage tool is not present in the docker image. Use the one in the
build directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Like for test_fs, no need to mess with loop mounts.
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Update the tcminit value to string and number both as per commit
342ccba5586a ("arm64: zynqmp: Fix tcminit mode value based on argv") and
also adds negative cases based on invalid command sequences.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Link: https://lore.kernel.org/r/48f75577f6735a0d14105658e89b625d45537bb1.1731672024.git.love.kumar@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
These are no-longer used. Drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The mkimage tool is not present in the docker image. Use the one in the
build directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Like for test_fs, no need to mess with loop mounts.
Signed-off-by: Richard Weinberger <richard@nod.at>
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Rename actual android bootmethod test to specify it's for boot image
version 4.
Add a unit test for testing the Android bootmethod with boot image
version 2.
This requires another mmc image (mmc8) to contain the following
partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
we can test this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc8.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-5-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Prepare v2025.01-rc3
|
|
Currently, MMC test runs on default mmc modes, adding a provision to
support multiple mmc modes through user defined parameters.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
'usb part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
'mmc part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Rephrasing the error and warning messages to be more meaningful and
clear.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Use an 'r' string to avoid a warning:
test/py/tests/test_spi.py:698: DeprecationWarning: invalid escape
sequence '\s'
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The Beagleplay board uses an SoC from the TI K3 family. This has both a
Cortex-R core and a Cortex-A core and the R core needs to come up before
the A core. In both cases we have U-Boot SPL then U-Boot proper being
used.
In practice this means we need two entirely separate builds to produce
an image.
Handle this in test.py by adding more parameters.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This can take a while and involve multiple steps (e.g. turning the board
back off). Add a section for it and show the output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Send the Labgrid quit characters to ask it to exit gracefully. This
typically allows it to power off the board being used. Only do this when
labgrid is being used (detected with an env var).
If that doesn't work, try the less graceful approach.
The normal approach for pytest is to simply kill the child process. This
makes Labgrid exit immediately. Thus it does not get a chance to execute
the 'off' part of strategy (which may power it off) and release the
device.
Without this, every board disconnect leaves the board in a bad state,
requiring separate steps to recover the board, then power it off.
The action is conditional on since USE_LABGRID_SJG being set, so only
affects operation if the Labgrid-sjg integration is being used.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There is a very annoying bug at present where the terminal echos part
of the first command sent to the board. This happens because the
terminal is still set to echo for a period until Labgrid starts up and
can change this.
Fix this by disabling echo (and other terminal features) as soon as the
spawn happens.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We expect commands to be echoed and this should happen quite quickly,
since U-Boot is sitting at the prompt waiting for a command.
Reduce the timeout for this situation. Try to produce a more useful
error message when something goes wrong. Also handle the case where the
connection has gone away since the last command was issued.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
There is quite a bit of code in pytest to try to start up U-Boot on a
board, with timeouts, expects, etc.
This is tedious to maintain and is peripheral to the test system's
purpose. It seems better to put this logic in the lab itself, where is
can provide such support.
With Labgrid we can use the UbootStrategy class to get the board into a
useful state, however it needs to do it. Then it can report to pytest
by writing a suitable string along with the U-Boot version it detected.
Add support for detecting 'lab mode' and simply assume that all is well
in that case. Collect the version string when Labgrid says it is ready.
This is only used with the Labgrid-sjg integration. When Labgrid starts
the UbootStrategy it checks if U_BOOT_SOURCE_DIR is set. If so it emits
a string '{lab mode}' that tells test.py to simply wait for an
indication that the board is ready. All banner-checking is skipped. The
indication comes in the form of another string 'Lab: Board is ready'
which Labgrid sends once the board is sitting at a prompt ready to run
tests. Then test.py emits 'U-Boot is ready' and continues with testing.
Note that Labgrid has the same kind of "check for a string" logic that
is in test.py, except it's not caring about the correct number / order
of banner prints. This checking could be added, however. If something
fails, the complete output is shown, so it is possible to see what went
wrong.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In Labgrid there is the concept of a 'role', which is similar to the
U-Boot board ID in U-Boot's pytest subsystem.
The role indicates both the target and information about the U-Boot
build to use. It can also provide any amount of other configuration.
The information is obtained using the 'labgrid-client query' operation.
Using this role, all required configuration for the board is stored
within the Labgrid environment, with pytest simply querying it. This
allows connecting to boards using an interactive console, something that
isn't possible without some kind of mapping. It also means that we don't
need to replicate the pytest functionality in tbot, since Labgrid can
handle the console and kick off builds as needed.
Make use of this in tests, so that only the role is required in gitlab
and other situations. The board type and other things can be queried
as needed.
Use a new 'u-boot-test-getrole' script to obtain the requested
information.
With this it is possible to run lab tests in gitlab with just a single
'ROLE' variable for each board.
Note that, without this feature:
- interactive use of boards with Labgrid-sjg would require repeating the
id/board in a separate configuration file
- Gitlab yaml file would need to specify both the id and board
This feature is entirely optional, however, with the code gracefully
falling back to using a separate ID and board.
Link: https://tbot.tools
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sometimes we know that the board is already running the right software,
so provide an option to allow running of tests directly, without first
resetting the board.
This saves time when re-running a test where only the Python code is
changing.
Note that this feature is open to errors, since the user must know that
the board is in a fit state to execute tests. It is useful for repeated
iteration on a particular test, where it can save quite a bit of time.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When a board is finished with, the lab may want to power it off, or
perform some other function. Add a new script which is called when tests
are complete.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
When Labgrid is used, it can get U-Boot ready for running tests. It
prints a message when it has done so.
Add logic to detect this message and accept it.
Note that this does not change pytest, which still (also) looks for the
U-Boot banner. This change merely makes it possible for pytest to
believe Labgrid when it says that the board is ready for use.
In several cases, the board starts up and Labgrid receives some initial
output, then pytest starts and misses some of that output, because it
came in while Labgrid had the console open. Then pytest fails because
it doesn't see the expected banners.
With this change, Labgrid handles getting U-Boot to a prompt, in a
fully reliable manner. Then pytest starts up and can simply start
running its tests.
But, again, this does not prevent pytest from handling a banner if one
is provided (e.g. if not using the Labgrid integration).
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Create a new disk for use with tests, which contains the new 'testapp'
EFI app specifically intended for testing the EFI loader.
Attach it to the USB device, since most testing is currently done with
mmc.
Initially this image will be used to test the EFI bootmeth.
Fix a stale comment in prep_mmc_bootdev() while we are here.
For now this uses sudo and a compressed fallback file, like all the
other bootstd tests. Once this series is in, the patch which moves
this to use user-space tools will be cleaned up and re-submitted.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The tests test_usb_ext4load_ext4write, test_usb_ext2load and
test_usb_load depend on the command ext4write being present not just
the feature of being able to write to an ext4 file system. So update
their dependencies to include the ext4write command itself. This will
prevent spurious test failures when running the USB tests against USB
storage with an ext2/ext4 partition but no ext4write command available.
Fixes: 1c5b6edad381 ("test/py: usb: Add tests for USB device")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
|
|
When test_usb_load finds multiple partitions of the same type then
it will cause a test failure. The call to write the test file will
write a different test file to each partition but only return the
name and size of the last one written. So the test then fails to
load the test file from the first partition as it uses the name of
a file on a different partition.
Refactor the code so that only one test file is written at a time
and is written to only the partition being tested at that time. This
allows the correct file name to always be available to the code that
runs the load command. This reduces the number of files written and
also the number of calls to crc32 needed.
Fixes: 1c5b6edad381 ("test/py: usb: Add tests for USB device")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Love Kumar <love.kumar@amd.com>
|
|
The mkimage call is done twice. Remove the duplicate.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
With this series opendir, readdir, closedir are implemented for ext4.
These functions are needed for the UEFI sub-system to interact with
the ext4 file system.
To reduce code growth the functions are reused to implement the ls
command for ext4.
A memory leak in ext4fs_exists is resolved.
ext4fs_iterate_dir is simplified by removing a redundant pointer copy.
Link: https://lore.kernel.org/r/20241026064048.370062-1-heinrich.schuchardt@canonical.com
|
|
Now that opendir, readir, closedir are implemented for ext4 we can use
fs_ls_generic() for implementing the ls command.
Adjust the unit tests:
* fs_ls_generic() produces more spaces between file size and name.
* The ext4 specific message "** Can not find directory. **\n" is not
written anymore.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
