| Age | Commit message (Collapse) | Author |
|---|
|
Add tests for LED boot and activity feature and add required property in
sandbox test DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
In case a regulator DT node contains regulator-always-on or regulator-boot-on
property, make sure the regulator gets correctly configured by U-Boot on start
up. Unconditionally probe such regulator drivers. This is a preparatory patch
for introduction of .regulator_post_probe() which would trigger the regulator
configuration.
Parsing of regulator-always-on and regulator-boot-on DT property has been
moved to regulator_post_bind() as the information is required early, the
rest of the DT parsing has been kept in regulator_pre_probe() to avoid
slowing down the boot process.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Jerome Forissier <jerome.forissier@linaro.org> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
|
|
Add a test to test_efi_loader.py similar to the TFTP test but for HTTP
with the wget command.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
test_efi_helloworld_net() and test_efi_grub_net() depend on
cmd_tftpboot so add the missing annotations.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
If env__pxe_boot_test_skip is not present, it defaults to True not
False. Therefore fix the comment.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
When running the bootstage tests currently we get a warning like:
tests/test_bootstage.py::test_bootstage_stash
...PytestReturnNotNoneWarning: Expected None, but tests/test_bootstage.py::test_bootstage_stash returned (37748736, 4096), which will be an error in a future version of pytest. Did you mean to use `assert` in stead of `return`?
This is because the unstash test will run the stash test and fetch the
addr / size from that. Rework the test to be stash and unstash and then
run the unstash command at the end of the current stash test.
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Simon Glass <sjg@chromium.org> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
|
|
The test currently runs twice as it is declared twice. Unwind this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The normal approach with sandbox is to use a fixed memory address in the
RAM, to avoid needing to create a map for transient local variables.
Update this test to use this approach.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It isn't that important to factor out constants in tests, but in this
case we have 0x200 and 512 used. The commands don't use the constant
as they use a block count ('1'). It doesn't create more code to use a
constant, so create one.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This tests maps some local variables into sandbox's address space. Make
sure to unmap them afterwards.
Note that the normal approach with sandbox is to use a fixed memory
address in the RAM, to avoid needing to create a map for transient local
variables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 04291ee0aba ("cmd: mbr: Allow 4 MBR partitions without need...")
|
|
U-Boot commands typically don't need 0x to specify hex, since they use
hex by default. Adding 0x in this test is confusing since it suggests
that it is necessary. Drop it from the file.
Also use the %#x construct to get the 0x when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Switch to lower-case hex which is more commonly used in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Clear any USB-keyboard devices before running a unit test, to avoid
using a stale udevice pointer in stdio. Add a long comment to explain
this situation and why this solution seems best, at least for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set up a function for this, since it needs to be used from multiple test
files.
This test file is only used on sandbox, where USB is enabled, so drop
the local declaration of usb_started
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Tidy up most of these warnings. Remaining are four of these:
R0914: Too many local variables
which can only by fixed by splitting things into functions, so that is
left for another time.
Part of this change was done by the flynt tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Francis Laniel <francis.laniel@amarulasolutions.com> says:
Hi!
With this series, I bumped the new hush to get the latest commits from upstream.
Also, I added back a reverted commit which goal was to fix a bad behavior in
old hush test.
I had to tweak a bit this commit, but everything worked both locally and in the
CI.
|
|
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
This was done to keep compatibility with the existing behavior.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With e58bafc35fe3 ("lib: membuff: fix readline not returning line in case of overflow")
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_skipline();
}
ut_assert_console_end();
The if block mentioned above that calls console_record_reset_enable() is
completely removed as fixed by e58bafc35fe3.
[flaniel: adapt second if]
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
[flaniel: remove console_record_reset_enable() if]
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Add a test to check the version/variant bits of v4 and v5 UUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add some basic unit tests to validate that the UUID generation behaves
as expected. This matches the implementation in efi_loader for sandbox
and a Qualcomm board and should catch any regressions.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
If erase/write/read size is 0 then it throws the mentioned error message
when debug message ie enabled as per 899fb5aa8bec ("cmd: sf/nand: Print
and return failure when 0 length is passed"), setting it to None as
debug message is not enabled by default for testing.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Implement trivial extension to the sandbox PHY, which makes it pretend
to support selecting USB Host mode and nothing else. Any other mode is
rejected with -EINVAL. Any submode except for default submode 0 is
rejected with -EOPNOTSUPP . The implementation behaves in this trivial
way to permit easy unit testing using test which is also added in this
commit.
To run the test, use e.g. sandbox64_defconfig and run U-Boot as follows:
$ ./u-boot -Tc 'ut dm phy_setup'
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
|
|
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
|
|
Prepare v2024.10-rc4
|
|
Use the API function list_count_nodes() to count the number of list
entries.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add test cases for sf commands to verify various SPI flash operations
such as erase, write and read. It also adds qspi lock unlock cases.
This test relies on boardenv_* configurations to run it for different
SPI flash family such as single SPI, QSPI, and OSPI.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
Simon Glass <sjg@chromium.org> says:
This series started as a small fix for checking for an empty line,
but in the process several other problems were found and fixed:
- fix tests which use console recording but don't set the flag
- drop unnecessary resetting of the console in tests
- drop unnecessary blank line before MMC output
- update the docs a little
- fix buildman test failure on newer Pythons
- a few other minor things
This series also renames the confusing flag names, so that they are
easier to remember - just a UTF_ (unit-test flags) prefix.
|
|
Use the ut_assert_console_end() function provided, rather than doing it
separately.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is seldom necessary to call this function. Drop its use in the
command tests.
Add a few extra checks to the wget test so that resetting is not
needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Quite a lot of tests have the same two lines of code at the start. Move
this into the two setup functions to reduce redundancy.
Add a line to check the output from set_working_fdt_addr() since this is
always emitted.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Some functions are using asserts but the result of the functions
themselves is not checked. This means that if a test fails, the result
is not noticed until later, which can be confusing to debug.
Add the missing asserts.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Set this flag rather than doing things manually in the test.
Drop unnecessary calls to console_record_reset_enable()
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Set this flag rather than doing things manually in the test.
Drop the code which is now unnecessary.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Write out the tests in full to allow the test to be found more easily
when there is a failure. We could use a single test function with a
for() loop but this would stop at the first failure, and some variations
might while other pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The _REC suffix doesn't add much. Really what we want to know is whether
the test uses the console, so rename this flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Most tests don't have this. It helps to keep the test declaration
clearly associated with the function it relates to, rather than the next
one in the file. Remove the extra blank line and mention this in the
docs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The existing implementation of ut_assert_nextline_empty() cannot
distinguish between an empty line and no line at all. It can in fact be
called at the end of the recorded output and will happily return
success.
Adjust the logic so that this condition is detected. Show a failure
message in this case.
Fix the one test which falls foul of this fix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 400175b0a7d ("test: Add a way to check each line of console...")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Some of the logging fields are larger than they need to be. Shrink them
and adjust the ordering to improve alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This value is only really used before relocation. There is not much use
to showing its value in bdinfo, so drop it. Move it to the new boardf
struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
