| Age | Commit message (Collapse) | Author |
|---|
|
Building sandbox_defconfig with
CONFIG_BOOTSTD=n
CONFIG_UT_BOOTSTD=y
leads to an error
/usr/bin/ld: test/cmd_ut.o:(.data.rel.cmd_ut_sub+0xc0):
undefined reference to `do_ut_bootstd'
Add the missing dependency.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Building sandbox_defconfig with
CONFIG_UT_BOOTSTD=n
CONFIG_MEASURMENT=y
results in an error:
/usr/bin/ld: test/cmd_ut.o:(.data.rel.cmd_ut_sub+0x408):
undefined reference to `do_ut_measurement'
Fixes: 5999ea20fa42 ("test: Add sandbox TPM boot measurement")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Maxim Uvarov <maxim.uvarov@linaro.org> says:
Add small net fixes prior lwip patches.
|
|
Printing net list is useful in CI log files.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With
lib: membuff: fix readline not returning line in case of overflow
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
ut_assert_console_end();
Same thing should be done with the if block mentioned above that calls
console_record_reset_enable().
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240105072212.6615-8-clamor95@gmail.com
[mkorpershoek: reworded commit title]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Sandbox uses an API to map between addresses and pointers. This allows
it to have (emulated) memory at zero and avoid arch-specific addressing
details. It also allows memory-mapped peripherals to work.
As an example, on many machines sandbox maps address 100 to pointer
value 10000000.
However this is not correct for ACPI, if sandbox starts another program
(e.g EFI app) and passes it the tables. That app has no knowledge of
sandbox's address mapping. So to make this work we want to store
10000000 as the value in the table.
Add two new 'nomap' functions which clearly make this exeption to how
sandbox works.
This should allow EFI apps to access ACPI tables with sandbox, e.g. for
testing purposes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Use the word 'acpi' in this test so that it runs along with all the
other ACPI tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Allow the alignment to be specified when creating a bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The v0.9 spec provides for a 24-byte header. Update the implementation
to match this.
Rename the fields of the bloblist header to align to the spec.
Adds an alignment field into the bloblist header.
Update the related bloblist APIs and UT testcases.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The v0.9 spec provides for an 8-byte header for each blob, with fewer
fields.
The blob data start address should be aligned to the alignment specified
by the bloblist header.
Update the implementation to match this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Use a sinple 8-bit checksum for bloblist, as specified by the spec
version 0.9.
Spec v0.9 specifies that the entire bloblist area is checksummed,
including unused portions. Update the code to follow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The updated bloblist structure stores the alignment as a power-of-two
value in its structures. Adjust the API to use this, to avoid needing to
calling ilog2().
Update the bloblist alignment from 16 bytes to 8 bytes.
Drop a stale comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Align bloblist tags with the FW handoff spec v0.9.
The most common ones are from 0.
TF related ones are from 0x100.
All non-standard ones from 0xfff000.
Added new defined tags:
BLOBLISTT_OPTEE_PAGABLE_PART for TF.
BLOBLISTT_TPM_EVLOG and BLOBLISTT_TPM_CRB_BASE for TPM.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Francis Laniel <francis.laniel@amarulasolutions.com> says:
During 2021 summer, Sean Anderson wrote a contribution to add a new shell, based
on LIL, to U-Boot [1, 2].
While one of the goals of this contribution was to address the fact actual
U-Boot shell, which is based on Busybox hush, is old there was a discussion
about adding a new shell versus updating the actual one [3, 4].
So, in this series, with Harald Seiler, we updated the actual U-Boot shell to
reflect what is currently in Busybox source code.
Basically, this contribution is about taking a snapshot of Busybox shell/hush.c
file (as it exists in commit 37460f5da) and adapt it to suit U-Boot needs.
This contribution was written to be as backward-compatible as possible to avoid
breaking the existing.
So, the modern hush flavor offers the same as the actual, that is to say:
1. Variable expansion.
2. Instruction lists (;, && and ||).
3. If, then and else.
4. Loops (for, while and until).
No new features offered by Busybox hush were implemented (e.g. functions).
It is possible to change the parser at runtime using the "cli" command:
=> cli print
old
=> cli set modern
=> cli print
modern
=> cli set old
The default parser is the old one.
Note that to use both parser, you would need to set both
CONFIG_HUSH_MODERN_PARSER and CONFIG_HUSH_OLD_PARSER.
In terms of testing, new unit tests were added to ut to ensure the new behavior
is the same as the old one and it does not add regression.
Nonetheless, if old behavior was buggy and fixed upstream, the fix is then added
to U-Boot [5].
In sandbox, all of these tests pass smoothly:
=> printenv board
board=sandbox
=> ut hush
Running 20 hush tests
...
Failures: 0
=> cli set modern
=> ut hush
Running 20 hush tests
...
Failures: 0
Thanks to the effort of Harald Seiler, I was successful booting a board:
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> cli get
old
=> boot
...
root@lepotato:~#
root@lepotato:~# reboot
...
=> cli set modern
=> cli get
modern
=> printenv fdtfile
fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb
=> boot
...
root@lepotato:~#
This contribution indeed adds a lot of code and there were concern about its
size [6, 7].
With regard to the amount of code added, the cli_hush_upstream.c is 13030 lines
long but it seems a smaller subset is really used:
gcc -D__U_BOOT__ -E common/cli_hush_upstream.c | wc -l
2870
Despite this, it is better to still have the whole upstream code for the sake of
easing maintenance.
With regard to memory size, I conducted some experiments for version 8 of this
series and for a subset of arm64 boards and found the worst case to be 4K [8].
Tom Rini conducted more research on this and also found the increase to be
acceptable [9].
If you want to review it - your review will really be appreciated - here are
some information regarding the commits:
* commits marked as "test:" deal with unit tests.
* commit "cli: Add Busybox upstream hush.c file." copies Busybox shell/hush.c
into U-Boot tree, this explain why this commit contains around 12000 additions.
* commit "cli: Port Busybox 2021 hush to U-Boot." modifies previously added file
to permit us to use this as new shell.
The really good idea of #include'ing Busybox code into a wrapper file to define
some particular functions while minimizing modifications to upstream code comes
from Harald Seiler.
* commit "cmd: Add new parser command" adds a new command which permits
selecting parser at runtime.
I am not really satisfied with the fact it calls cli_init() and cli_loop() each
time the parser is set, so your reviews would be welcomed.
* Other commits focus on enabling features we need (e.g. if).
|
|
Modifies return code got from while loop as modern hush always returns 0 from
while loop.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Modifies the expected result for modern hush.
Indeed, there were bugs in actual U-Boot hush which were fixed in upstream
Busybox.
As modern hush is based on upstream Busybox, these bugs no longer exist.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Modifies the expected result for modern hush.
Indeed, there were bugs in actual U-Boot hush which were fixed in upstream
Busybox.
As modern hush is based on upstream Busybox, these bugs no longer exist.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
Enables using, in code, modern hush as parser for run_command function family.
It also enables the command run to be used by CLI user of modern hush.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
The added tests verifies correct behavior of for, while and until loops.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Verifies behavior of commands separated by ';', '&&' and '||'.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Verifies shell variables are replaced by their values.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
5804ebfeb1ce ("test: hush: Test hush if/else") translated this test to a C test,
so this python file is no more needed.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
As asked in commit 9c6bf1715f6a ("test/py: hush_if_test: Add tests to cover
octal/hex values"), this commit translates test_hush_if_test.py to a C test.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Introduce a new subcommand to ut: ut hush.
For the moment, this command does nothing, future commits will add tests which
will be run on command call.
Note that CONFIG_HUSH_PARSER must be defined to compile this new subcommand.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
In general terms, we -include include/linux/kconfig.h and so normal
U-Boot code does not need to also #include it. However, for code which
is shared with userspace we may need to add it so that either our full
config is available or so that macros such as CONFIG_IS_ENABLED() can be
evaluated. In this case make sure that we guard these includes with a
test for USE_HOSTCC so that it clear as to why we're doing this.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This is supposed to be supported by the 'bootflow cmd' command, at
least according to the help. There is a 'bootflow cmd clear' but it is
often more intuitive to use 'bootcmd cmd set' with an empty value.
Update the command to pass BOOTFLOWCL_EMPTY in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Commit 51bb33846ad2 ("bootm: Support string substitution in
bootargs") introduced a feature of bootargs string substitution
and changed a flag used in bootm_process_cmdline_env() call
to be either true or false. With this flag value,
condition in bootm_process_cmdline()
`if (flags & BOOTM_CL_SUBST)` is never true
and process_subst() is never called.
Add a simple test to verify if substitution works OK.
Signed-off-by: Piotr Kubik <piotr.kubik@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Prepare v2024.01-rc5
|
|
Now that efi_loader subsystem provides interfaces that are equivalent
with bootefi command, we can replace command invocations with APIs.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
|
|
Fix unused variable error produced by building tests
Fixes: d3061824 (test: dm: clk_ccf: test ccf_clk_ops)
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231216-b4-fix_build-v1-1-b8e79c94744f@outlook.com
|
|
Assign ccf_clk_ops to .ops of clk_ccf driver so that it can act as an
clk provider. Also add "#clock-cells=<1>" to its device tree node.
Add "i2c_root" to clk_test in the device tree and driver for testing.
Get "i2c_root" clock in CCF unit tests and add tests for it.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231111-enable_count-v3-2-08a821892fa9@outlook.com
|
|
Add a simple test case which sets clock rate to its current value.
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231205232334.2931-3-ivprusov@salutedevices.com
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
old_dtb can only be assumed initialized in the finally block
if it is assigned a value before the try statement.
Avoid a pylint error reported by current pylint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
ACPI tables may comprise either RSDT, XSDT, or both. The current code fails
to check the presence of the RSDT table before accessing it. This leads to
an exception if the RSDT table is not provided.
The XSDT table takes precedence over the RSDT table.
The return values of list_rsdt() and list_rsdp() are always zero and not
checked. Remove the return values.
Addresses in the XSDT table are 64-bit. Adjust the output accordingly.
As the RSDT table has to be ignored if the XSDT command is present there is
no need to compare the tables in a display command. Anyway the
specification does not require that the sequence of addresses in the RSDT
and XSDT table are the same.
The FACS table header does not provide revision information. Correct the
description of dump_hdr().
Adjust the ACPI test to match the changed output format of the 'acpi list'
command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The size of the ACPI table header is not a multiple of 8. We have to mark
struct acpi_xsdt as packed to correctly access field Entry.
Add a unit test for the offsets of field Entry in the RSDT and XSDT tables.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Provide a unit test for acpi_find_table()
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Allow showing a menu and automatically booting, with 'bootflow scan'.
This is more convenient than using a script.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These tests cannot work on x86 machines as memory at address zero is
not writable. Add a condition to skip these.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These tests are marked as driver model tests, but have nothing to do
with driver model. As a result, they are run as part of 'ut dm' which
only exists for sandbox.
Move them to the 'lib' suite and drop the requirement for initing
devices, since they don't use devices.
Also put the lib_test_lmb_max_regions() macro inside the same #ifdef
as its function, to avoid a build error if the condition is false.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This needs test devices which are only present on sandbox. Add a check
for this and skip just this test if running on a real board.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The font test needs two fonts. If one is not available, skip out early,
to avoid an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The error that this test checks for is only shown on sandbox. For real
boards, there is normally no error. Add a special case to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Calling into sub-test functions should be done using ut_assertok() so
that the test exits immediately on failure. Add those which are
missing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This test assumes that the stack pointer is the same across two calls
to lmb_init_and_reserve() but this is not the case on x86, for example.
Add a special case to handle this, along with a detailed comment.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These make use of disk images which are not available on reak boards.
Add a new Kconfig to ensure these tests only run where they are valid.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This doesn't seem to work on a real board, so use the test on sandbox
only.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sometimes we need to skip to a line but it includes addresses or other
information which can vary depending on the runtime conditions.
Add a new ut_assert_skip_to_linen() which is similar to the existing
ut_assert_skip_to_line() function but only checks that the console line
matches up to the length of the provided string.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a new suite for 'cmd' tests, used for testing commands. These are
kept in the test/cmd directory.
For now it is empty, but it will be used for coreboot-command tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
To quote the author:
It would be useful to be able to boot an OS when CONFIG_CMDLINE is
disabled. This could allow reduced code size.
Standard boot provides a way to handle programmatic boot, without
scripts, so such a feature is possible. The main impediment is the
inability to use the booting features of U-Boot without a command line.
So the solution is to avoid passing command arguments and the like to
code in boot/
A similar process has taken place with filesystems, for example, where
we have (somewhat) separate Kconfig options for the filesystem commands
and the filesystems themselves.
This series starts the process of refactoring the bootm logic so that
it can be called from standard boot without using the command line.
Mostly it removes the use of argc, argv and cmdtbl from the internal
logic.
Some limited tidy-up is included, but this is kept to smaller patches,
rather than trying to remove all #ifdefs etc. Some function comments
are added, however.
A simple programmatic boot is provided as a starting point.
This work will likely take many series, so this is just the start.
Size growth with this series for firefly-rk3288 (Thumb2) is:
arm: (for 1/1 boards) all +23.0 rodata -49.0 text +72.0
This should be removed by:
https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/11
but it is not included in this series as it is already large enough.
No functional change is intended in this series.
Changes in v3:
- Add a panic if programmatic boot fails
- Drop RFC tag
Changes in v2:
- Add new patch to adjust position of unmap_sysmem() in boot_get_kernel()
- Add new patch to obtain command arguments
- Fix 'boot_find_os' typo
- Pass in the command name
- Use the command table to provide the command name, instead of "bootm"
|
