| Age | Commit message (Collapse) | Author |
|---|
|
The patch implement new property 'fit,sign' that can be declared
at the top-level 'fit' node. If that option is declared, fit tryies
to detect private keys directory among binman include directories.
That directory than passed to mkimage using '-k' flag and that enable
signing of FIT.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Renumbered files, moved new tests to end:
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This patch is for Marek, to provide a starting point.
To try it, use 'binman test -T' and see the missing coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Some images do not have an image_pos value, for example an image which
is part of a compressed section and therefore cannot be accessed
directly.
Handle this case, returning None as the value.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The base address of the ELF containing symbols is normally added to
any symbols written, so that the value points to the correct address in
memory when everything is loaded. When the binary resides on disk, a
different offset may be needed, typically 0. Provide a way to specify
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add a clarification to the documentation and add a missing comment. Also
update the test so that when it fails it is easier to see what is going
on, rather than having to decode hex strings.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
With OF_UPSTREAM the dts files are in an SoC-specific subdirectory,
meaning that the resulting dtb files all end up in a similar
subdirectory.
We don't want the subdirectory name to appear as a node name in the FIT,
so handle this as a special case.
Also the default devicetree may have a directory-name prefix, so handle
that when searching through the available devicetree files.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Since the files are known to be in the provided directory, use that
instead of requiring it to be added to the list of input directories.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add tests for missing tools to complete the test coverage for this
etype.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This function has strange indentation. Fix it.
Fixes: 8c1fbd1f607 ("binman: ftest: Add test for u_boot_spl_pubkey_dtb")
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix a minor typo in this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Binman has a the useful feature of handling missing external blobs
gracefully, including allowing them to be missing, deciding whether the
resulting image is functional or not and faking blobs when this is
necessary for particular tools (e.g. mkimage).
This feature is widely used in CI. One drawback is that if U-Boot grows
too large to fit along with the required blobs, then this is not
discovered until someone does a 'real' build which includes the blobs.
Add a 'assume-size' property to entries to allow Binman to reserve a
given size for missing external blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
The methods `unittest.assertEquals()` and
`unittest.assertRegexpMatches()` are marked deprecated[1].
In Python 3.12 these aliases have been removed, so do a sed to replace
them with their new names.
[1] https://docs.python.org/3.11/library/unittest.html#deprecated-aliases
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
CC: Simon Glass <sjg@chromium.org>
CC: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Use yamllint for checking whether YAML configuration files are adhering
to default yamllint rules.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Suggested-by: Nishanth Menon <nm@ti.com>
|
|
Manorit Chawdhry <m-chawdhry@ti.com> says:
K3 devices have firewalls that are used to prevent illegal accesses to
memory regions that are deemed secure. The series prevents the illegal
accesses to ATF and OP-TEE regions that are present in different K3
devices.
AM62X, AM62AX and AM64X are currently in hold due to some firewall
configurations that our System Controller (TIFS) needs to handle.
The devices that are not configured with the firewalling nodes will not
be affected and can continue to work fine until the firewall nodes are
added so will be a non-blocking merge.
Test Logs: https://gist.github.com/manorit2001/4cead2fb3a19eb5d19005b3f54682627
CICD Run: https://github.com/u-boot/u-boot/pull/442
|
|
Add test for TI firewalling node in ti-secure.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
|
|
Pytest 7.4.3 complains if a variable is used in a finally clause without
having been initialized before the try clause.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
K3 devices introduces the concept of centralized power, resource and
security management to System Firmware. This is to overcome challenges
by the traditional approach that implements system control functions on
each of the processing units.
The software interface for System Firmware is split into TIFS and DM. DM
(Device Manager) is responsible for resource and power management from
secure and non-secure hosts. This additional binary is necessary for
specific platforms' ROM boot images and is to be packaged into tispl.bin
Add an entry for DM. The entry can be used for the packaging of
tispl.bin by binman along with ATF and TEE.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
cbfsutil changed to 4-byte alignment for filenames instead of 16.
Adjust the binman implementation to do the same.
This mirrors commit 5779ca718c in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
cbfsutil changed to skip adding a compression attribute if there is no
compression. Adjust the binman implementation to do the same.
This mirrors commit 105cdf5625 in coreboot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Add support in binman for generating EFI empty capsules. These
capsules are used in the FWU A/B update feature. Also add test cases
in binman for the corresponding code coverage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The various fields of a generated capsule are currently verified
through hard-coded offsets. Use the dump-capsule feature for dumping
the capsule header contents and use those for capsule verification.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add support in binman for generating EFI capsules. The capsule
parameters can be specified through the capsule binman entry. Also add
test cases in binman for testing capsule generation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add test for the 'xilinx-bootgen' etype
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow missing bootgen tool; comment testXilinxBootgenMissing() comment:
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This provides support for phandles to be copied over from templates. This
is not quite safe, since if the template is instantiated twice (i.e. in
two different nodes), then duplicate phandles will be found. This will
result in an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
It is not necessary to keep templates around after they have been
processed. They can cause confusion and potentially duplicate phandles.
Remove them.
Use the same means of detecting a template node in _ReadImageDesc so that
the two places are consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This file aids debugging when binman fails to get far enough to write out
the final devicetree file. Write it immediate after template processing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Show the filename next to the node path in missing blob help messages,
also show a generic missing blob message when there was no help message
for the help tag.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Missing optional blobs was not reported for generated entries, e.g.
tee-os on rockchip targets. Implement a CheckOptional to fix this.
After this the following can be shown:
Image 'simple-bin' is missing optional external blobs but is still functional: tee-os
/binman/simple-bin/fit/images/@tee-SEQ/tee-os (tee-os):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Make it more clear that the missing external blob is optional in the
printed warning message.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add test for u_boot_spl_pubkey_dtb. The test adds a public key to the
dtb and checks if the required nodes will be added to the images dtb.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add tests to reach 100% code coverage for the added etype encrypted.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
These have ended up with the same numbers as earlier files. Fix them.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Drop the use of a numbered key file since numbering is just for the test
devicetree files. Also adjust the tests to avoid putting a hard-coded
path to binman in the file, using the entry arg instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Without this re-building will fail with an error when trying to create
the symlink for the second time with an already exists error.
Signed-off-by: Andrew Davis <afd@ti.com>
[n-francis@ti.com: Added support for test output dir and testcase]
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
The ti-secure entry contains certificate for binaries that will be
loaded or booted by system firmware whereas the ti-secure-rom entry
contains certificate for binaries that will be booted by ROM. Support
for both these types of certificates is necessary for booting of K3
devices.
Reviewed-by: Simon Glass <sjg@chromium.org>
[vigneshr@ti.com: fixed inconsist cert generation by multiple packing]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
The ti-board-config entry loads and validates a given YAML config file
against a given schema, and generates the board config binary. K3
devices require these binaries to be packed into the final system
firmware images.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
|
|
Add support for writing symbols and determining the assumed position of
binaries inside a mkimage image. This is useful as an example for other
entry types which might want to do the same thing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Allow templates to be used inside a section, not just in the top-level
/binman node.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Add this as a separate test case.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Allow a template to appear in the top level description when using
multiple images.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Collections can used to collect the contents of other entries into a
single entry, but they result in a single entry, with the original entries
'left behind' in their old place.
It is useful to be able to specific a set of entries ones and have it used
in multiple images, or parts of an image.
Implement this mechanism.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Fix the check for the __bss_size symbol, since it may be 0. Unfortunately
there was no test coverage for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Sometimes multiple boards are built with binman and it is useful to
specify a different FDT list for each. At present this is not possible
without providing multiple values of the of-list entryarg (which is not
supported in the U-Boot build system).
Allow a fit,fdt-list-val string-list property to be used instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
