From 31f0941821d315435348f7ee00ef79b94cf9daec Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 11 Oct 2012 17:10:00 +0800 Subject: ENGR00228238 i.mx6/i.mx6dl: sabresd: add solo-ddr32bit support This patch adds the solo-ddr32bit config support. The DDR script got from: http://compass.freescale.net/livelink/livelink/227589697/ MX6DL_init_DDR3_400MHz_32bit_For_SD_1.0.inc.txt?func=doc.Fetch&nodeid=227589697 Signed-off-by: Jason Liu --- Makefile | 1 + board/freescale/mx6q_sabresd/flash_header.S | 127 +++++++++- include/configs/mx6solo_sabresd.h | 352 ++++++++++++++++++++++++++++ 3 files changed, 478 insertions(+), 2 deletions(-) create mode 100644 include/configs/mx6solo_sabresd.h diff --git a/Makefile b/Makefile index 26a47910b70..07022feca3f 100644 --- a/Makefile +++ b/Makefile @@ -3322,6 +3322,7 @@ mx6q_arm2_iram_config : unconfig } @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx6q_arm2 freescale mx6 +mx6solo_sabresd__config \ mx6dl_sabresd_config \ mx6dl_sabresd_mfg_config \ mx6dl_sabresd_android_config \ diff --git a/board/freescale/mx6q_sabresd/flash_header.S b/board/freescale/mx6q_sabresd/flash_header.S index 502544680af..206415908a3 100644 --- a/board/freescale/mx6q_sabresd/flash_header.S +++ b/board/freescale/mx6q_sabresd/flash_header.S @@ -54,6 +54,129 @@ image_len: .word _end_of_copy - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET plugin: .word 0x0 #if defined CONFIG_MX6DL_DDR3 +#if defined CONFIG_DDR_32BIT +dcd_hdr: .word 0x406802D2 /* Tag=0xD2, Len=76*8 + 4 + 4, Ver=0x40 */ +write_dcd_cmd: .word 0x046402CC /* Tag=0xCC, Len=76*8 + 4, Param=0x04 */ + +# IOMUXC_BASE_ADDR = 0x20e0000 +# DDR IO TYPE +MXC_DCD_ITEM(1, IOMUXC_BASE_ADDR + 0x774, 0x000c0000) +MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x754, 0x00000000) +# Clock +MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x4ac, 0x00000030) +MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x4b0, 0x00000030) +# Address +MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x464, 0x00000030) +MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x490, 0x00000030) +MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x74c, 0x00000030) +# Control +MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x494, 0x00000030) +MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x4a4, 0x00003000) +MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x4a8, 0x00003000) +MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x4a0, 0x00000000) +MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x4b4, 0x00003030) +MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x4b8, 0x00003030) +MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x76c, 0x00000030) +# Data Strobe: IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL - DDR_INPUT=0, CMOS, +# CMOS mode saves power, but have less timing margin in case of DDR +# timing issue on your board you can try DDR_MODE: [= 0x00020000] +MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x750, 0x00000000) + +MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x4bc, 0x00000030) +MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x4c0, 0x00000030) +MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x4c4, 0x00000030) +MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x4c8, 0x00000030) +MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x4cc, 0x00000000) +MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x4d0, 0x00000000) +MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x4d4, 0x00000000) +MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x4d8, 0x00000000) +# DATA:IOMUXC_SW_PAD_CTL_GRP_DDRMODE - DDR_INPUT=0, CMOS, +# CMOS mode saves power, but have less timing margin in case of DDR +# timing issue on your board you can try DDR_MODE: [= 0x00020000] + +MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x760, 0x00000000) + +MXC_DCD_ITEM(25, IOMUXC_BASE_ADDR + 0x764, 0x00000030) +MXC_DCD_ITEM(26, IOMUXC_BASE_ADDR + 0x770, 0x00000030) +MXC_DCD_ITEM(27, IOMUXC_BASE_ADDR + 0x778, 0x00000030) +MXC_DCD_ITEM(28, IOMUXC_BASE_ADDR + 0x77c, 0x00000030) +MXC_DCD_ITEM(29, IOMUXC_BASE_ADDR + 0x780, 0x00000000) +MXC_DCD_ITEM(30, IOMUXC_BASE_ADDR + 0x784, 0x00000000) +MXC_DCD_ITEM(31, IOMUXC_BASE_ADDR + 0x78c, 0x00000000) +MXC_DCD_ITEM(32, IOMUXC_BASE_ADDR + 0x748, 0x00000000) + +MXC_DCD_ITEM(33, IOMUXC_BASE_ADDR + 0x470, 0x00000030) +MXC_DCD_ITEM(34, IOMUXC_BASE_ADDR + 0x474, 0x00000030) +MXC_DCD_ITEM(35, IOMUXC_BASE_ADDR + 0x478, 0x00000030) +MXC_DCD_ITEM(36, IOMUXC_BASE_ADDR + 0x47c, 0x00000030) +MXC_DCD_ITEM(37, IOMUXC_BASE_ADDR + 0x480, 0x00000000) +MXC_DCD_ITEM(38, IOMUXC_BASE_ADDR + 0x484, 0x00000000) +MXC_DCD_ITEM(39, IOMUXC_BASE_ADDR + 0x488, 0x00000000) +MXC_DCD_ITEM(40, IOMUXC_BASE_ADDR + 0x48c, 0x00000000) + +# MMDC_P0_BASE_ADDR = 0x021b0000 +# MMDC_P1_BASE_ADDR = 0x021b4000 +# Calibrations +# ZQ +MXC_DCD_ITEM(41, MMDC_P0_BASE_ADDR + 0x800, 0xa1390003) +MXC_DCD_ITEM(42, MMDC_P1_BASE_ADDR + 0x800, 0xa1390003) +# write leveling +MXC_DCD_ITEM(43, MMDC_P0_BASE_ADDR + 0x80c, 0x00450049) +MXC_DCD_ITEM(44, MMDC_P0_BASE_ADDR + 0x810, 0x00390043) +# DQS gating, read delay, write delay calibration values +# based on calibration compare of 0x00ffff00 +MXC_DCD_ITEM(45, MMDC_P0_BASE_ADDR + 0x83c, 0x42240229) +MXC_DCD_ITEM(46, MMDC_P0_BASE_ADDR + 0x840, 0x021a0219) +MXC_DCD_ITEM(47, MMDC_P0_BASE_ADDR + 0x848, 0x4e4f5150) +MXC_DCD_ITEM(48, MMDC_P0_BASE_ADDR + 0x850, 0x35363136) +# read data bit delay +MXC_DCD_ITEM(49, MMDC_P0_BASE_ADDR + 0x81c, 0x33333333) +MXC_DCD_ITEM(50, MMDC_P0_BASE_ADDR + 0x820, 0x33333333) +MXC_DCD_ITEM(51, MMDC_P0_BASE_ADDR + 0x824, 0x33333333) +MXC_DCD_ITEM(52, MMDC_P0_BASE_ADDR + 0x828, 0x33333333) +# Complete calibration by forced measurment +MXC_DCD_ITEM(53, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800) +MXC_DCD_ITEM(54, MMDC_P1_BASE_ADDR + 0x8b8, 0x00000800) +# MMDC init: +# in DDR3, 32-bit mode, only MMDC0 is initiated: +MXC_DCD_ITEM(55, MMDC_P0_BASE_ADDR + 0x004, 0x0002002d) +MXC_DCD_ITEM(56, MMDC_P0_BASE_ADDR + 0x008, 0x00333030) + +MXC_DCD_ITEM(57, MMDC_P0_BASE_ADDR + 0x00c, 0x40445323) +MXC_DCD_ITEM(58, MMDC_P0_BASE_ADDR + 0x010, 0xb66e8c63) + +MXC_DCD_ITEM(59, MMDC_P0_BASE_ADDR + 0x014, 0x01ff00db) +MXC_DCD_ITEM(60, MMDC_P0_BASE_ADDR + 0x018, 0x00001740) +MXC_DCD_ITEM(61, MMDC_P0_BASE_ADDR + 0x01c, 0x00008000) +MXC_DCD_ITEM(62, MMDC_P0_BASE_ADDR + 0x02c, 0x000026d2) +MXC_DCD_ITEM(63, MMDC_P0_BASE_ADDR + 0x030, 0x00440e21) +/* CS0_END - 0x2fffffff, 512M */ +MXC_DCD_ITEM(64, MMDC_P0_BASE_ADDR + 0x040, 0x00000017) + +/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */ +MXC_DCD_ITEM(65, MMDC_P0_BASE_ADDR + 0x400, 0x11420000) + +/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */ +MXC_DCD_ITEM(66, MMDC_P0_BASE_ADDR + 0x000, 0x83190000) + +# Initialize 2GB DDR3 - Micron MT41J128M +# MR2 +MXC_DCD_ITEM(67, MMDC_P0_BASE_ADDR + 0x01c, 0x04008032) +# MR3 +MXC_DCD_ITEM(68, MMDC_P0_BASE_ADDR + 0x01c, 0x00008033) +# MR1 +MXC_DCD_ITEM(69, MMDC_P0_BASE_ADDR + 0x01c, 0x00428031) +# MR0 +MXC_DCD_ITEM(70, MMDC_P0_BASE_ADDR + 0x01c, 0x07208030) +# ZQ calibration +MXC_DCD_ITEM(71, MMDC_P0_BASE_ADDR + 0x01c, 0x04008040) +# final DDR setup +MXC_DCD_ITEM(72, MMDC_P0_BASE_ADDR + 0x020, 0x00005800) +MXC_DCD_ITEM(73, MMDC_P0_BASE_ADDR + 0x818, 0x00000007) +MXC_DCD_ITEM(74, MMDC_P0_BASE_ADDR + 0x004, 0x0002556d) +MXC_DCD_ITEM(75, MMDC_P0_BASE_ADDR + 0x404, 0x00011006) +MXC_DCD_ITEM(76, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000) +#else /* i.MX6DL 64BIT-DDR */ dcd_hdr: .word 0x40E002D2 /* Tag=0xD2, Len=91*8 + 4 + 4, Ver=0x40 */ write_dcd_cmd: .word 0x04DC02CC /* Tag=0xCC, Len=91*8 + 4, Param=0x04 */ @@ -180,8 +303,8 @@ MXC_DCD_ITEM(88, MMDC_P1_BASE_ADDR + 0x818, 0x00000007) MXC_DCD_ITEM(89, MMDC_P0_BASE_ADDR + 0x004, 0x0002556d) MXC_DCD_ITEM(90, MMDC_P1_BASE_ADDR + 0x404, 0x00011006) MXC_DCD_ITEM(91, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000) - -#else +#endif +#else /* i.MX6Q */ dcd_hdr: .word 0x40D802D2 /* Tag=0xD2, Len=90*8 + 4 + 4, Ver=0x40 */ write_dcd_cmd: .word 0x04D402CC /* Tag=0xCC, Len=90*8 + 4, Param=0x04 */ diff --git a/include/configs/mx6solo_sabresd.h b/include/configs/mx6solo_sabresd.h new file mode 100644 index 00000000000..a317189e0e2 --- /dev/null +++ b/include/configs/mx6solo_sabresd.h @@ -0,0 +1,352 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX6DL SabreSD Freescale board. + * The board is configured with SOLO and 32-bit DDR bus-width. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */ +#define CONFIG_MXC +#define CONFIG_MX6DL +#define CONFIG_MX6DL_DDR3 +#define CONFIG_MX6DL_SABRESD +#define CONFIG_DDR_32BIT /* for DDR 32bit */ +#define CONFIG_FLASH_HEADER +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_MX6_CLK32 32768 + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_ARCH_MMU /* disable MMU first */ +#define CONFIG_L2_OFF /* disable L2 cache first*/ + +#define CONFIG_MX6_HCLK_FREQ 24000000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SYS_64BIT_VSPRINTF + +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SERIAL_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MXC_GPIO +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_UART_BASE_ADDR UART1_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_NET_MULTI 1 +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_SPI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMXOTP + +/* Enable below configure when supporting nand */ +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_ENV +#define CONFIG_CMD_REGUL + +#define CONFIG_CMD_CLOCK +#define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ + +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_IMX_DOWNLOAD_MODE + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x10800000 /* loadaddr env var */ +#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200 nosmp\0" \ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + "bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp " \ + "root=/dev/mmcblk0p1 rootwait\0" \ + "bootcmd_mmc=run bootargs_base bootargs_mmc; " \ + "mmc dev 3; " \ + "mmc read ${loadaddr} 0x800 0x2000; bootm\0" \ + "bootcmd=run bootcmd_net\0" \ + + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "MX6SDL SABRESD U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10010000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_FEC0_IOBASE ENET_BASE_ADDR +#define CONFIG_FEC0_PINMUX -1 +#define CONFIG_FEC0_MIIBASE -1 +#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM +#define CONFIG_MXC_FEC +#define CONFIG_FEC0_PHY_ADDR 1 +#define CONFIG_ETH_PRIME +#define CONFIG_RMII +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_IPADDR 192.168.1.103 +#define CONFIG_SERVERIP 192.168.1.101 +#define CONFIG_NETMASK 255.255.255.0 + +/* + * OCOTP Configs + */ +#ifdef CONFIG_CMD_IMXOTP + #define CONFIG_IMX_OTP + #define IMX_OTP_BASE OCOTP_BASE_ADDR + #define IMX_OTP_ADDR_MAX 0x7F + #define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#endif + +/* + * I2C Configs + */ +#ifdef CONFIG_CMD_I2C + #define CONFIG_HARD_I2C + #define CONFIG_I2C_MXC 1 + #define CONFIG_SYS_I2C_PORT I2C2_BASE_ADDR + #define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_SYS_I2C_SLAVE 0x8 + #define CONFIG_MX6_INTER_LDO_BYPASS 0 +#endif + +/* + * SPI Configs + */ +#ifdef CONFIG_CMD_SF + #define CONFIG_FSL_SF + #define CONFIG_SPI_FLASH_IMX_M25PXX + #define CONFIG_SPI_FLASH_CS 0 + #define CONFIG_IMX_ECSPI + #define IMX_CSPI_VER_2_3 1 + #define MAX_SPI_BYTES (64 * 4) +#endif + +/* Regulator Configs */ +#ifdef CONFIG_CMD_REGUL + #define CONFIG_ANATOP_REGULATOR + #define CONFIG_CORE_REGULATOR_NAME "vdd1p1" + #define CONFIG_PERIPH_REGULATOR_NAME "vdd1p1" +#endif + +/* + * MMC Configs + */ +#ifdef CONFIG_CMD_MMC + #define CONFIG_MMC + #define CONFIG_GENERIC_MMC + #define CONFIG_IMX_MMC + #define CONFIG_SYS_FSL_USDHC_NUM 4 + #define CONFIG_SYS_FSL_ESDHC_ADDR 0 + #define CONFIG_SYS_MMC_ENV_DEV 2 + #define CONFIG_DOS_PARTITION + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 + + /* detect whether SD1, 2, 3, or 4 is boot device */ + #define CONFIG_DYNAMIC_MMC_DEVNO + + /* SD3 and SD4 are 8 bit */ + #define CONFIG_MMC_8BIT_PORTS 0xC + /* Setup target delay in DDR mode for each SD port */ + #define CONFIG_GET_DDR_TARGET_DELAY +#endif + +/* + * GPMI Nand Configs + */ +/* #define CONFIG_CMD_NAND */ + +#ifdef CONFIG_CMD_NAND + #define CONFIG_NAND_GPMI + #define CONFIG_GPMI_NFC_SWAP_BLOCK_MARK + #define CONFIG_GPMI_NFC_V2 + + #define CONFIG_GPMI_REG_BASE GPMI_BASE_ADDR + #define CONFIG_BCH_REG_BASE BCH_BASE_ADDR + + #define NAND_MAX_CHIPS 8 + #define CONFIG_SYS_NAND_BASE 0x40000000 + #define CONFIG_SYS_MAX_NAND_DEVICE 1 + + /* NAND is the unique module invoke APBH-DMA */ + #define CONFIG_APBH_DMA + #define CONFIG_APBH_DMA_V2 + #define CONFIG_MXS_DMA_REG_BASE ABPHDMA_BASE_ADDR +#endif + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_DDR_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define iomem_valid_addr(addr, size) \ + (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#define CONFIG_FSL_ENV_IN_MMC +/* #define CONFIG_FSL_ENV_IN_NAND */ + +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_NAND) + #define CONFIG_ENV_IS_IN_NAND 1 + #define CONFIG_ENV_OFFSET 0x100000 +#elif defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif + +/* #define CONFIG_SPLASH_SCREEN */ +/* #define CONFIG_MXC_EPDC */ + +/* + * SPLASH SCREEN Configs + */ +#define CONFIG_SPLASH_SCREEN +#ifdef CONFIG_SPLASH_SCREEN + /* + * Framebuffer and LCD + */ + #define CONFIG_LCD + #define CONFIG_FB_BASE (TEXT_BASE + 0x300000) + #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#ifdef CONFIG_MXC_EPDC + #undef LCD_TEST_PATTERN + /* #define CONFIG_SPLASH_IS_IN_MMC 1 */ + #define LCD_BPP LCD_MONOCHROME + /* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ + + #define CONFIG_MXC_EPDC 1 + + #define CONFIG_WORKING_BUF_ADDR (TEXT_BASE + 0x100000) + #define CONFIG_WAVEFORM_BUF_ADDR (TEXT_BASE + 0x200000) + #define CONFIG_WAVEFORM_FILE_OFFSET 0x600000 + #define CONFIG_WAVEFORM_FILE_SIZE 0xF0A00 + #define CONFIG_WAVEFORM_FILE_IN_MMC + +#ifdef CONFIG_SPLASH_IS_IN_MMC + #define CONFIG_SPLASH_IMG_OFFSET 0x4c000 + #define CONFIG_SPLASH_IMG_SIZE 0x19000 +#endif +#else /* !CONFIG_MXC_EPDC */ + #define CONFIG_IPU_V3H + #define CONFIG_VIDEO_MX5 + #define CONFIG_IPU_CLKRATE 260000000 + #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE + #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + #define LCD_BPP LCD_COLOR16 + #define CONFIG_CMD_BMP + #define CONFIG_BMP_8BPP + #define CONFIG_SPLASH_SCREEN_ALIGN + #define CONFIG_SYS_WHITE_ON_BLACK +#endif +#endif /* CONFIG_SPLASH_SCREEN */ +#endif /* __CONFIG_H */ -- cgit v1.2.3