From 158c9c78a50f7f04f4498abe36f8c1be83fafb75 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 1 Apr 2016 21:38:04 -0600 Subject: ARM: rpi: add some missing Kconfig help text Add notes re: enabling the UART to the RPi 3 32-bit help text. Fully describe the RPi 3 64-bit board option. Signed-off-by: Stephen Warren Reviewed-by: Tom Rini --- arch/arm/mach-bcm283x/Kconfig | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-bcm283x/Kconfig') diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index a1ad1a4e0fa..f4c9502b3f1 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -63,7 +63,9 @@ config TARGET_RPI_3_32B This option assumes the VideoCore firmware is configured to use the mini UART (rather than PL011) for the serial console. This is the default on the RPi 3. To enable the UART console, the following non- - default option must be present in config.txt: enable_uart=1. + default option must be present in config.txt: enable_uart=1. This is + required for U-Boot to operate correctly, even if you only care + about the HDMI/usbkbd console. This option creates a build targetting the ARMv7/AArch32 ISA. select ARMV7_LPAE @@ -72,6 +74,30 @@ config TARGET_RPI_3_32B config TARGET_RPI_3 bool "Raspberry Pi 3 64-bit build" + help + Support for all BCM2837-based Raspberry Pi variants, such as + the RPi 3 model B, in AArch64 (64-bit) mode. + + This option assumes the VideoCore firmware is configured to use the + mini UART (rather than PL011) for the serial console. This is the + default on the RPi 3. To enable the UART console, the following non- + default option must be present in config.txt: enable_uart=1. This is + required for U-Boot to operate correctly, even if you only care + about the HDMI/usbkbd console. + + At the time of writing, the VC FW requires a non-default option in + config.txt to request the ARM CPU boot in 64-bit mode: + arm_control=0x200 + + The VC FW typically provides ARM "stub" code to set up the CPU and + quiesce secondary SMP CPUs. This is not currently true in 64-bit + mode. In order to boot U-Boot before the VC FW is enhanced, please + see the commit description for the commit which added RPi3 support + for a workaround. Since the instructions are temporary, they are not + duplicated here. The VC FW enhancement is tracked in + https://github.com/raspberrypi/firmware/issues/579. + + This option creates a build targetting the ARMv8/AArch64 ISA. select ARM64 select BCM2837 -- cgit v1.2.3