From 5c0d38f655cedee8a4dba9e14f8b8e93fdd94880 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 8 Oct 2016 18:00:24 +0530 Subject: arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki --- board/engicam/icorem6/README | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'board/engicam') diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README index c264a9443b4..12d1e2180c8 100644 --- a/board/engicam/icorem6/README +++ b/board/engicam/icorem6/README @@ -1,12 +1,19 @@ How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit: ----------------------------------------------------------------------------- -- Build U-Boot for Engicam i.CoreM6 QDL: +- Configure U-Boot for Engicam i.CoreM6 QDL: $ make mrproper $ make icorem6qdl_mmc_defconfig + +- Build for i.CoreM6 DualLite/Solo + $ make +- Build for i.CoreM6 Quad/Dual + +$ make DEVICE_TREE=imx6q-icore + This will generate the SPL image called SPL and the u-boot-dtb.img. - Flash the SPL image into the micro SD card: -- cgit v1.2.3