From 4d86dd022e771d7bb5f3a8ba9a8cb6954678bd7f Mon Sep 17 00:00:00 2001 From: Helmut Raiger Date: Thu, 27 Oct 2011 01:31:15 +0000 Subject: mx31: Add board support for HALE TT-01 This adds basic board support for TT-01 based on the Bluetechnix i.MX31 SOM. Currently only NOR-Flash boot is implemented. Signed-off-by: Helmut Raiger Acked-by: Stefano Babic --- board/hale/tt01/Makefile | 51 ++++++++++ board/hale/tt01/lowlevel_init.S | 32 +++++++ board/hale/tt01/tt01.c | 200 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 283 insertions(+) create mode 100644 board/hale/tt01/Makefile create mode 100644 board/hale/tt01/lowlevel_init.S create mode 100644 board/hale/tt01/tt01.c (limited to 'board/hale') diff --git a/board/hale/tt01/Makefile b/board/hale/tt01/Makefile new file mode 100644 index 00000000000..f6b28541e19 --- /dev/null +++ b/board/hale/tt01/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 HALE electronic +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o +COBJS := tt01.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/hale/tt01/lowlevel_init.S b/board/hale/tt01/lowlevel_init.S new file mode 100644 index 00000000000..6e9dc80ef69 --- /dev/null +++ b/board/hale/tt01/lowlevel_init.S @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2009 Magnus Lilja + * (C) Copyright 2011 Helmut Raiger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include + +.globl lowlevel_init +lowlevel_init: + /* Also setup the Peripheral Port Remap register inside the core */ + ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + mov pc, lr diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c new file mode 100644 index 00000000000..2995c8f1050 --- /dev/null +++ b/board/hale/tt01/tt01.c @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2011 HALE electronic + * (C) Copyright 2009 Magnus Lilja + * (c) 2007 Pengutronix, Sascha Hauer + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define BOARD_STRING "Board: HALE TT-01" + +/* Clock configuration */ +#define CCM_CCMR_SETUP 0x074B0BF5 + +static void board_setup_clocks(void) +{ + struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE; + volatile int wait = 0x10000; + + writel(CCM_CCMR_SETUP, &ccm->ccmr); + while (wait--) + ; + + writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr); + writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr); + + /* Set up clock to 532MHz */ + writel(PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | + PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | + PDR0_MCU_PODF(0), &ccm->pdr0); + writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12), + &ccm->mpctl); + writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1), + &ccm->spctl); +} + +/* DRAM configuration */ + +#define ESDMISC_MDDR_SETUP 0x00000004 +#define ESDMISC_MDDR_RESET_DL 0x0000000c +/* + * decoding magic 0x6ac73a = 0b 0110 1010 1100 0111 0011 1010 below: + * tXP = 11, tWTR = 0, tRP = 10, tMRD = 10 + * tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11 + * tRCD = 011, tRC = 010 + * note: all but tWTR (1), tRC (111) are reset defaults, + * the same values work in the jtag configuration + * + * Bluetechnix setup has 0x75e73a (for 128MB) = + * 0b 0111 0101 1110 0111 0011 1010 + * tXP = 11, tWTR = 1, tRP = 01, tMRD = 01 + * tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11 + * tRCD = 011, tRC = 010 + */ +#define ESDCFG0_MDDR_SETUP 0x006ac73a +#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) +#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ + ESDCTL_DSIZ(2) | ESDCTL_BL(1)) +#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) +#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) +#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) +#define ESDCTL_RW ESDCTL_SETTINGS + +static void board_setup_sdram(void) +{ + u32 *pad; + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + + /* + * setup pad control for the controller pins + * no loopback, no pull, no keeper, no open drain, + * standard input, standard drive, slow slew rate + */ + for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B; + pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++) + *pad = 0; + + /* set up MX31 DDR Memory Controller */ + writel(ESDMISC_MDDR_SETUP, &esdc->misc); + writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0); + + /* perform DDR init sequence for CSD0 */ + writel(ESDCTL_PRECHARGE, &esdc->ctl0); + writel(0x12344321, CSD0_BASE+0x0f00); + writel(ESDCTL_AUTOREFRESH, &esdc->ctl0); + writel(0x12344321, CSD0_BASE); + writel(0x12344321, CSD0_BASE); + writel(ESDCTL_LOADMODEREG, &esdc->ctl0); + writeb(0xda, CSD0_BASE+0x33); + writeb(0xff, CSD0_BASE+0x1000000); + writel(ESDCTL_RW, &esdc->ctl0); + writel(0xDEADBEEF, CSD0_BASE); + writel(ESDMISC_MDDR_RESET_DL, &esdc->misc); +} + +static void tt01_spi3_hw_init(void) +{ + /* CSPI3 */ + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC)); + /* CSPI3, SS0 = Atlas */ + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1)); + + /* start CSPI3 clock (3 = always on except if PLL off) */ + setbits_le32(CCM_CGR0, 3 << 16); +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +int board_early_init_f(void) +{ + /* CS4: FPGA incl. network controller */ + struct mxc_weimcs cs4 = { + /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ + CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), + /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ + CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), + /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ + CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) + }; + + /* this seems essential, won't start without, but why? */ + writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF); + + board_setup_clocks(); + board_setup_sdram(); + mxc_setup_weimcs(4, &cs4); + + /* Setup UART2 and SPI3 pins */ + mx31_uart2_hw_init(); + tt01_spi3_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + return 0; +} + +int board_late_init(void) +{ + pmic_init(); + +#ifdef CONFIG_HW_WATCHDOG + mxc_hw_watchdog_enable(); +#endif + + return 0; +} + +int checkboard(void) +{ + puts(BOARD_STRING "\n"); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} -- cgit v1.2.3