From 60dc58f735f173458ebed217cc7fe0c24816f383 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 23 May 2014 12:48:10 -0600 Subject: cmd_mmc: default to HW partition 0 if not specified Currently, "mmc dev 0" does not change the selected HW partition. I think it makes more sense if "mmc dev 0" is an alias for "mmc dev 0 0", i.e. that HW partition 0 (main data area) is always selected by default if the user didn't request a specific partition. Otherwise, the following happens, which feels wrong: Select HW partition 1 (boot0): mmc dev 0 1 Doesn't change the HW partition, so it's still 1 (boot0): mmc dev 0 With this patch, the second command above re-selects the main data area. Note that some MMC devices (i.e. SD cards) don't support HW partitions. However, this patch still works, since mmc_start_init() sets the current partition number to 0, and mmc_select_hwpart() succeeds if the requested partition is already selected. Signed-off-by: Stephen Warren Acked-by: Pantelis Antoniou --- common/cmd_mmc.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'common/cmd_mmc.c') diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index eea337506c..9e6a26fe62 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -403,7 +403,7 @@ static int do_mmc_part(cmd_tbl_t *cmdtp, int flag, static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int dev, part = -1, ret; + int dev, part = 0, ret; struct mmc *mmc; if (argc == 1) { @@ -426,13 +426,12 @@ static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag, if (!mmc) return CMD_RET_FAILURE; - if (part != -1) { - ret = mmc_select_hwpart(dev, part); - printf("switch to partitions #%d, %s\n", - part, (!ret) ? "OK" : "ERROR"); - if (ret) - return 1; - } + ret = mmc_select_hwpart(dev, part); + printf("switch to partitions #%d, %s\n", + part, (!ret) ? "OK" : "ERROR"); + if (ret) + return 1; + curr_device = dev; if (mmc->part_config == MMCPART_NOAVAILABLE) printf("mmc%d is current device\n", curr_device); -- cgit v1.2.3