From 52affe04fa5493597d8a5f6202507190950a32e6 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Tue, 9 Mar 2010 19:17:52 -0600 Subject: ColdFire: Update processors' serial port configuration Provide parameter passing to uart_port_config(). Update port configuration - un-mask it before enable the bits. Signed-off-by: TsiChung Liew --- cpu/mcf523x/cpu_init.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'cpu/mcf523x/cpu_init.c') diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 3c04fd41346..0f299f0c3c5 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -130,21 +130,32 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart |= (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); break; case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + gpio->par_uart &= + ~(GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK); + gpio->par_uart |= + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); break; case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_uart &= ~(GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + gpio->par_uart |= (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + gpio->feci2c |= + (GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD); +#endif break; } } @@ -156,7 +167,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (setclear) { gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + (GPIO_PAR_FECI2C_EMDC_FECEMDC | + GPIO_PAR_FECI2C_EMDIO_FECEMDIO); } else { gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); -- cgit v1.2.3