From 7a0bbe64d8ec87e07179fe6124dc8a177b5abd3e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Aug 2015 16:19:34 +0200 Subject: sunxi: axp221: Allow specifying dcdc2 voltage via Kconfig Allow specifying the axp221 dcdc2 voltage via Kconfig, this is necessary because on some boards the 1.2V default does not work reliable. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- drivers/power/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/power') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 23cdd714ae6..df5e3734b05 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -22,6 +22,15 @@ config AXP221_DCDC1_VOLT things like GPIO-s, sdcard interfaces, etc. On most boards this is undervolted to 3.0V to safe battery. +config AXP221_DCDC2_VOLT + int "axp221 dcdc2 voltage" + depends on AXP221_POWER + default 1200 + ---help--- + Set the voltage (mV) to program the axp221 dcdc2 at, set to 0 to + disable dcdc2. On A31 boards this is typically used for VDD-GPU, + on A23/A33 for VDD-SYS, this should normally be set to 1.2V. + config AXP221_DLDO1_VOLT int "axp221 dldo1 voltage" depends on AXP221_POWER -- cgit v1.2.3