From 381e4e639720d8d2efb8066c7c48ec9588cb28c7 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 11 Jan 2008 01:12:06 +0100 Subject: Added support for the mgsuvd board from keymile. Signed-off-by: Heiko Schocher --- include/commproc.h | 26 ++++ include/configs/mgsuvd.h | 325 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 351 insertions(+) create mode 100644 include/configs/mgsuvd.h (limited to 'include') diff --git a/include/commproc.h b/include/commproc.h index 12400e3edd..53659c28fd 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1120,6 +1120,32 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x0000003d) #endif /* CONFIG_MBX */ +/*** MGSUVD *********************************************************/ + +/* The MGSUVD Service Module uses SCC3 for Ethernet */ + +#ifdef CONFIG_MGSUVD +#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */ +#define CPM_CR_ENET CPM_CR_CH_SCC3 +#define SCC_ENET 2 +#define PA_ENET_RXD ((ushort)0x0010) /* PA 11 */ +#define PA_ENET_TXD ((ushort)0x0020) /* PA 10 */ +#define PA_ENET_RCLK ((ushort)0x1000) /* PA 3 CLK 5 */ +#define PA_ENET_TCLK ((ushort)0x2000) /* PA 2 CLK 6 */ + +#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */ + +#define PC_ENET_RENA ((ushort)0x0200) /* PC 6 */ +#define PC_ENET_CLSN ((ushort)0x0100) /* PC 7 */ + +/* Control bits in the SICR to route TCLK (CLK6) and RCLK (CLK5) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero. + */ +#define SICR_ENET_MASK ((uint)0x00FF0000) +#define SICR_ENET_CLKRT ((uint)0x00250000) +#endif /* CONFIG_MGSUVD */ + + /*** MHPC ********************************************************/ #if defined(CONFIG_MHPC) diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h new file mode 100644 index 0000000000..13e7a7c07b --- /dev/null +++ b/include/configs/mgsuvd.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC866 1 /* This is a MPC866 CPU */ +#define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */ + +#define CONFIG_8xx_GCLK_FREQ 66000000 + +#define CFG_SMC_UCODE_PATCH 1 /* Relocate SMC1 */ +#define CFG_SMC_DPMEM_OFFSET 0x1fc0 +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "addcon=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/mgsuvd/uImage\0" \ + "fdt_addr=400000\0" \ + "kernel_addr=200000\0" \ + "fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off f0000000 +${filesize};" \ + "erase f0000000 +${filesize};" \ + "cp.b 200000 f0000000 ${filesize};" \ + "protect on f0000000 +${filesize}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ + +#define CONFIG_TIMESTAMP /* but print image timestmps */ + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xf0000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_FLASH_SIZE 32 +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#define CFG_SYPCR 0xffffff89 + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + */ +#define CFG_SIUMCR 0x00610480 + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK 0x01800000 +#define CFG_SCCR 0x01800000 + +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0xf0000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: Default value of OR0 after reset + */ +#define CFG_OR0_PRELIM 0xfe000954 +#define CFG_BR0_PRELIM 0xf0000401 + +/* + * BR1 and OR1 (SDRAM) + * + */ +#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE (64 << 20) /* max 64 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM 0x00000A00 + +#define CFG_OR1_PRELIM 0xfc000800 +#define CFG_BR1_PRELIM (0x000000C0 | 0x01) + +#define CFG_MPTPR 0x0200 +/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used), + 1 Write loop Cycle (not used), 1 Timer Loop Cycle */ +#define CFG_MBMR 0x10964111 +#define CFG_MAR 0x00000088 + +/* + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + */ +#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) +/* HS HS noch zu setzen */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SCC3_ENET +#define CONFIG_ETHPRIME "SCC ETHERNET" +#define CONFIG_HAS_ETH0 + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,866@0" +#define OF_SOC "soc@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc/cpm/serial@a80" + +#endif /* __CONFIG_H */ -- cgit v1.2.3