From 38254f45b0b412332726c90d3184ad47479fcffb Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 15 Apr 2008 14:14:25 +0200 Subject: New i.MX31 SPI driver This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far only implemented and tested on i.MX31, can with a modified register layout and definitions be used for i.MX27, I think, MXC CPUs have similar SPI controllers too. Signed-off-by: Guennadi Liakhovetski --- include/asm-arm/arch-mx31/mx31-regs.h | 7 ++++++- include/spi.h | 16 +++++++++++++++- 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h index 380b401a421..d04072e6727 100644 --- a/include/asm-arm/arch-mx31/mx31-regs.h +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -37,6 +37,9 @@ #define CCM_UPCTL (CCM_BASE + 0x10) #define CCM_SPCTL (CCM_BASE + 0x18) #define CCM_COSR (CCM_BASE + 0x1C) +#define CCM_CGR0 (CCM_BASE + 0x20) +#define CCM_CGR1 (CCM_BASE + 0x24) +#define CCM_CGR2 (CCM_BASE + 0x28) #define CCMR_MDS (1 << 7) #define CCMR_SBYCS (1 << 4) @@ -118,7 +121,9 @@ #define MUX_CTL_RXD1 0x82 #define MUX_CTL_TXD1 0x83 #define MUX_CTL_CSPI2_MISO 0x84 -/* 0x85 .. 0x8a */ +#define MUX_CTL_CSPI2_SS0 0x85 +#define MUX_CTL_CSPI2_SS1 0x86 +#define MUX_CTL_CSPI2_SS2 0x87 #define MUX_CTL_CSPI2_MOSI 0x8b /* The modes a specific pin can be in diff --git a/include/spi.h b/include/spi.h index 03dc5bc0368..3a55a68c4d1 100644 --- a/include/spi.h +++ b/include/spi.h @@ -24,6 +24,18 @@ #ifndef _SPI_H_ #define _SPI_H_ +/* SPI mode flags */ +#define SPI_CPHA 0x01 /* clock phase */ +#define SPI_CPOL 0x02 /* clock polarity */ +#define SPI_MODE_0 (0|0) /* (original MicroWire) */ +#define SPI_MODE_1 (0|SPI_CPHA) +#define SPI_MODE_2 (SPI_CPOL|0) +#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_CS_HIGH 0x04 /* chipselect active high? */ +#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ +#define SPI_3WIRE 0x10 /* SI/SO signals shared */ +#define SPI_LOOP 0x20 /* loopback mode */ + /* * The function call pointer type used to drive the chip select. */ @@ -68,6 +80,8 @@ void spi_init(void); * * Returns: 0 on success, not 0 on failure */ -int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din); +int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din); + +int spi_select(unsigned int bus, unsigned int dev, unsigned long mode); #endif /* _SPI_H_ */ -- cgit v1.2.3