From 54e3316ffa46bd81e55216cd5aa5f087e9de9f8f Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Sun, 3 Jun 2018 16:21:27 +1200 Subject: ARM: kirkwood: SBx81LIFKW: Enable network hardware The SBx81LIFKW boards connect to the internal chassis management network via a Marvell 88e6097 L2 switch. The chassis connections are direct serdes on ports 8 and 9 with a RGMII interface on port 10 connected to the CPU MAC. For debugging purposes ports 0 and 1 are also taken out to headers on the board. Because the debug interfaces are sometimes connected to with straight ribbon cables we need to run them at 10Mbps. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- include/configs/SBx81LIFKW.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include') diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index 756eaa47fa9..bcc2c201d22 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -103,15 +103,10 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi over miiphy interface */ -#define CONFIG_PHYLIB #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init switch */ -#define CONFIG_MV88E61XX_SWITCH /* Enable MV88E61XX switch driver */ -#define CONFIG_MV88E61XX_PHY_PORTS 0x303 /* Pt0,1,8,9 */ -#define CONFIG_MV88E61XX_CPU_PORT 10 /* 10(CPU) */ #endif /* CONFIG_CMD_NET */ /* -- cgit v1.2.3