From d4ca31c40e8888b36635967522ec7ea03fd7e70b Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 2 Jan 2004 14:00:00 +0000 Subject: * Cleanup lowboot code for MPC5200 * Minor code cleanup (coding style) * Patch by Reinhard Meyer, 30 Dec 2003: - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, - added CONFIG_PHY_ADDR to include/configs/IceCube.h, - turned debug print of PHY registers into a function (called in two places) - added support for EMK MPC5200 based modules * Fix MPC8xx PLPRCR_MFD_SHIFT typo * Add support for TQM866M modules * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) * Fix a few compiler warnings --- include/asm-m68k/ptrace.h | 1 - include/asm-m68k/u-boot.h | 8 +- include/asm-mips/addrspace.h | 38 ++-- include/common.h | 14 +- include/commproc.h | 8 +- include/configs/IceCube.h | 1 + include/configs/MVBLUE.h | 60 ++--- include/configs/QS860T.h | 4 - include/configs/TOP5200.h | 160 +++++++------ include/configs/TQM855M.h | 36 ++- include/configs/TQM866M.h | 526 +++++++++++++++++++++++++++++++++++++++++++ include/configs/dbau1x00.h | 14 +- include/dataflash.h | 1 - include/flash.h | 23 +- include/mpc8xx.h | 26 +-- include/pci_ids.h | 1 - 16 files changed, 758 insertions(+), 163 deletions(-) create mode 100644 include/configs/TQM866M.h (limited to 'include') diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h index 343a9f497d..820551856d 100644 --- a/include/asm-m68k/ptrace.h +++ b/include/asm-m68k/ptrace.h @@ -105,4 +105,3 @@ struct pt_regs { #define PT_FPSCR (PT_FPR0 + 2*32 + 1) #endif - diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index eaf1de74e6..b4144900e8 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -39,9 +39,9 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ @@ -56,11 +56,11 @@ typedef struct bd_info { * * Keep it *SMALL* and remember to set CFG_INIT_DATA_SIZE > sizeof(init_data_t) */ -typedef struct init_data { +typedef struct init_data { unsigned long cpu_clk; /* VCOOUT = CPU clock in Hz! */ unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ - unsigned long relocated; /* Relocat. offset when running in RAM */ + unsigned long relocated; /* Relocat. offset when running in RAM */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_LCD unsigned long lcd_base; /* Base address of LCD frambuffer mem */ diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index 1fd00ccba9..845dd7c946 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -14,21 +14,21 @@ /* * Memory segments (32bit kernel mode addresses) */ -#define KUSEG 0x00000000 -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 -#define KSEG2 0xc0000000 -#define KSEG3 0xe0000000 +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 -#define K0BASE KSEG0 +#define K0BASE KSEG0 /* * Returns the kernel segment base of a given address */ #ifndef __ASSEMBLY__ -#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) +#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) #else -#define KSEGX(a) ((a) & 0xe0000000) +#define KSEGX(a) ((a) & 0xe0000000) #endif /* @@ -40,8 +40,8 @@ #define PHYSADDR(a) ((a) & 0x1fffffff) #endif -/* - * Returns the uncached address of a sdram address +/* + * Returns the uncached address of a sdram address */ #ifndef __ASSEMBLY__ #ifdef CONFIG_AU1X00 @@ -49,7 +49,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ -#define UNCACHED_SDRAM(a) PHYSADDR(a) +#define UNCACHED_SDRAM(a) PHYSADDR(a) #endif /* CONFIG_AU1X00 */ #endif /* __ASSEMBLY__ */ /* @@ -70,13 +70,13 @@ /* * Memory segments (64bit kernel mode addresses) */ -#define XKUSEG 0x0000000000000000 -#define XKSSEG 0x4000000000000000 -#define XKPHYS 0x8000000000000000 -#define XKSEG 0xc000000000000000 -#define CKSEG0 0xffffffff80000000 -#define CKSEG1 0xffffffffa0000000 -#define CKSSEG 0xffffffffc0000000 -#define CKSEG3 0xffffffffe0000000 +#define XKUSEG 0x0000000000000000 +#define XKSSEG 0x4000000000000000 +#define XKPHYS 0x8000000000000000 +#define XKSEG 0xc000000000000000 +#define CKSEG0 0xffffffff80000000 +#define CKSEG1 0xffffffffa0000000 +#define CKSSEG 0xffffffffc0000000 +#define CKSEG3 0xffffffffe0000000 #endif /* __ASM_MIPS_ADDRSPACE_H */ diff --git a/include/common.h b/include/common.h index ece5d64cf3..73a5a2e880 100644 --- a/include/common.h +++ b/include/common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -49,11 +49,11 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_MPC860T #define CONFIG_MPC86x 1 #endif -#if defined(CONFIG_MPC866P) || \ - defined(CONFIG_MPC866T) || \ - defined(CONFIG_MPC859T) || \ - defined(CONFIG_MPC859DSL) || \ - defined(CONFIG_MPC852T) +#if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \ + defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ + defined(CONFIG_MPC859DSL) || \ + defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \ + defined(CONFIG_MPC866P) #define CONFIG_MPC866_et_al 1 #define CONFIG_MPC86x 1 #endif @@ -100,7 +100,7 @@ typedef void (interrupt_handler_t)(void *); */ #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) + defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) # ifndef CONFIG_TQM8xxM # define CONFIG_TQM8xxM # endif diff --git a/include/commproc.h b/include/commproc.h index 3da804fe43..8bab5225c2 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -2,6 +2,9 @@ * MPC8xx Communication Processor Module. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * * This file contains structures and information for the communication * processor channels. Some CPM control and status is available * throught the MPC8xx internal memory map. See immap.h for details. @@ -1430,11 +1433,12 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */ -/*** TQM855L/M, TQM860L/M, TQM862L/M ********************************/ +/*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/ #if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \ defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) + defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \ + defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M) # ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 2f0a875838..194f62faf2 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -215,6 +215,7 @@ */ #define CONFIG_MPC5XXX_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x00 /* * GPIO configuration diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 6965e1cdb7..32f9e91c3b 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -53,7 +53,7 @@ #define ERR_LED(code) #endif -#undef DEBUG +#undef DEBUG #define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 @@ -71,14 +71,14 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n\0" -#define CONFIG_AUTOBOOT_STOP_STR "s\0" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n" +#define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 #define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \ - CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ - CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) + CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ + CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) #define CONFIG_BOOTP_MASK ( 0xffffffff ) @@ -103,19 +103,19 @@ #define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console_nr=0\0" \ - "dhcp_client_id=mvBOX-XP\0" \ - "dhcp_vendor-class-identifier=mvBOX\0" \ - "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ - "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ - "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "dhcp_client_id=mvBOX-XP\0" \ + "dhcp_vendor-class-identifier=mvBOX\0" \ + "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ + "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ + "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ + "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ + "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \ "mv_version=" MV_VERSION "\0" \ - "bootretry=30\0" + "bootretry=30\0" #define CONFIG_OVERWRITE_ETHADDR_ONCE @@ -124,11 +124,11 @@ *----------------------------------------------------------------------- */ -#define CONFIG_PCI +#define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_NET_MULTI +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 5 #define CONFIG_TULIP @@ -144,8 +144,8 @@ */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFF00000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_FLASH_BASE 0xFFF00000 +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_RESET_ADDRESS 0xFFF00100 #define CFG_EUMB_ADDR 0xFC000000 @@ -196,7 +196,7 @@ * For the detail description refer to the MPC8240 user's manual. */ -#define CONFIG_SYS_CLK_FREQ 33000000 +#define CONFIG_SYS_CLK_FREQ 33000000 #define CFG_HZ 10000 /* Bit-field values for MCCR1. */ @@ -205,17 +205,17 @@ /* Bit-field values for MCCR2. */ #define CFG_TSWAIT 0x5 -#define CFG_REFINT 430 +#define CFG_REFINT 430 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CFG_BSTOPRE 121 +#define CFG_BSTOPRE 121 /* Bit-field values for MCCR3. */ #define CFG_REFREC 8 /* Bit-field values for MCCR4. */ -#define CFG_PRETOACT 3 -#define CFG_ACTTOPRE 5 +#define CFG_PRETOACT 3 +#define CFG_ACTTOPRE 5 #define CFG_ACTORW 3 #define CFG_SDMODE_CAS_LAT 3 #define CFG_REGISTERD_TYPE_BUFFER 1 @@ -292,7 +292,7 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#undef CFG_FLASH_PROTECTION +#undef CFG_FLASH_PROTECTION #define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ #define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */ @@ -300,11 +300,11 @@ #define CFG_FLASH_WRITE_TOUT 1000 -#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_FLASH #define CFG_ENV_OFFSET 0x00010000 -#define CFG_ENV_SIZE 0x00010000 -#define CFG_ENV_SECT_SIZE 0x00010000 +#define CFG_ENV_SIZE 0x00010000 +#define CFG_ENV_SECT_SIZE 0x00010000 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 92eccd36aa..8d29a31a05 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -47,7 +47,6 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - /* * High Level Configuration Options * (easy to change) @@ -368,7 +367,6 @@ CONFIG_SPI /* #define CFG_BR5 0xE4000000 */ - /* * BR6 and OR6 (Expansion bus) * Base address = 0xE800_0000 - 0xEBFF_FFFF @@ -381,7 +379,6 @@ CONFIG_SPI /* #define CFG_BR6 0xE8000000 */ - /* * BR7 and OR7 (Expansion bus) * Base address = 0xEC00_0000 - 0xEFFF_FFFF @@ -394,7 +391,6 @@ CONFIG_SPI /* #define CFG_BR7 0xE8000000 */ - /* * Internal Definitions * diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 21daa2d971..624beed31a 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -1,16 +1,17 @@ /* * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * modified for TOP5200 by Reinhard Meyer, www.emk-elektronik.de - * TOP5200 differences from IceCube: - * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks - * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins - * 1 SDRAM/DDRAM Bank up to 256 MB - * local VPD I2C Bus is software driven and uses - * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL - * FLASH is located at 0x80000000 - * Internal regs are at 0xfff00000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * modified for TOP5200-series by Reinhard Meyer, www.emk-elektronik.de + * + * TOP5200 differences from IceCube: + * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks + * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins + * 1 SDRAM/DDRAM Bank up to 256 MB + * local VPD I2C Bus is software driven and uses + * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL + * FLASH is re-located at 0xff000000 + * Internal regs are at 0xf0000000 * Reset jumps to 0x00000100 * * See file CREDITS for list of people who contributed to this @@ -44,7 +45,7 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ -#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */ +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -97,18 +98,49 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include +/* + * low boot + */ +#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ +# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT16 1 +#endif + /* * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "bootfile=/tftpboot/MPC5200/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" /* * IPB Bus clocking configuration. */ #undef CFG_IPBSPEED_133 /* define for 133MHz speed */ - + /* * I2C configuration */ @@ -120,21 +152,21 @@ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_EEPROM_SIZE 0x2000 - + #define CONFIG_ENV_OVERWRITE #define CONFIG_MISC_INIT_R - + #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 - + #if defined (CONFIG_SOFT_I2C) # define SDA0 0x40 # define SCL0 0x80 -# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00)) -# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08)) -# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c)) -# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20)) -# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04)) +# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00)) +# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08)) +# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c)) +# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20)) +# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04)) # define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);} # define I2C_READ ((DVI0&SDA0)?1:0) # define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;} @@ -145,12 +177,12 @@ # define CFG_I2C_SPEED 100000 # define CFG_I2C_SLAVE 0x7F #endif - -#if defined (CONFIG_HARD_I2C) + +#if defined (CONFIG_HARD_I2C) # define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ # define CFG_I2C_SPEED 100000 /* 100 kHz */ # define CFG_I2C_SLAVE 0x7F -#endif +#endif /* * Flash configuration, expect one 16 Megabyte Bank at most @@ -158,7 +190,7 @@ #define CFG_FLASH_BASE 0xff000000 #define CFG_FLASH_SIZE 0x01000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0) #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ @@ -167,32 +199,32 @@ #undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ -/* - * DRAM configuration - will be read from VPD later... TODO! - */ -#if 0 -/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ -#define CFG_DRAM_DDR 0 -#define CFG_DRAM_EMODE 0 -#define CFG_DRAM_MODE 0x008D -#define CFG_DRAM_CONTROL 0x514F0000 -#define CFG_DRAM_CONFIG1 0xC2233A00 -#define CFG_DRAM_CONFIG2 0x88B70004 -#define CFG_DRAM_TAP_DEL 0x08 -#define CFG_DRAM_RAM_SIZE 0x19 -#endif -#if 1 -/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ -#define CFG_DRAM_DDR 0 -#define CFG_DRAM_EMODE 0 -#define CFG_DRAM_MODE 0x00CD -#define CFG_DRAM_CONTROL 0x514F0000 -#define CFG_DRAM_CONFIG1 0xD2333A00 -#define CFG_DRAM_CONFIG2 0x8AD70004 -#define CFG_DRAM_TAP_DEL 0x08 -#define CFG_DRAM_RAM_SIZE 0x19 -#endif - +/* + * DRAM configuration - will be read from VPD later... TODO! + */ +#if 0 +/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x008D +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xC2233A00 +#define CFG_DRAM_CONFIG2 0x88B70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif +#if 1 +/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x00CD +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xD2333A00 +#define CFG_DRAM_CONFIG2 0x8AD70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif + /* * Environment settings */ @@ -201,17 +233,17 @@ #define CFG_ENV_SIZE 0x0700 #define CFG_I2C_EEPROM_ADDR 0x57 -/* - * VPD settings - */ +/* + * VPD settings + */ #define CFG_FACT_OFFSET 0x1800 #define CFG_FACT_SIZE 0x0800 #define CFG_I2C_FACT_ADDR 0x57 - + /* - * Memory map - * - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 + * Memory map + * + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 */ #define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */ #define CFG_SDRAM_BASE 0x00000000 @@ -240,12 +272,12 @@ */ #define CONFIG_MPC5XXX_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1f +#define CONFIG_PHY_ADDR 0x1f #define CONFIG_PHY_TYPE 0x79c874 /* - * GPIO configuration: - * PSC1,2,3 predefined as UART - * PCI disabled + * GPIO configuration: + * PSC1,2,3 predefined as UART + * PCI disabled * Ethernet 100 with MD */ #define CFG_GPS_PORT_CONFIG 0x00058444 diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index e926d933c2..cb4a16abdc 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2003 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -83,6 +83,39 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ +#if 0 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 +#endif + #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_MAC_PARTITION @@ -93,6 +126,7 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ CFG_CMD_IDE | \ CFG_CMD_DATE ) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h new file mode 100644 index 0000000000..0219836f5e --- /dev/null +++ b/include/configs/TQM866M.h @@ -0,0 +1,526 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC866 1 /* This is a MPC866 CPU */ +#define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ + +#define CFG_8XX_XIN 10000000 /* XXX XXX XXX */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM855M/uImage\0" \ + "kernel_addr=40080000\0" \ + "ramdisk_addr=40180000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C256 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_IDE | \ + CFG_CMD_I2C | \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + * set PLL multiplication factor + */ +#if defined(CONFIG_133MHz) + /* for 133 MHz, we use a 10 MHz clock: + * MFN = 0x09, MFD = 0x1D, S = 0, MFI = 13 + */ +#define CFG_PLPRCR \ + ( 9 << PLPRCR_MFN_SHIFT | 0x1D << PLPRCR_MFD_SHIFT | \ + 0 << PLPRCR_S_SHIFT | 0x0D << PLPRCR_MFI_SHIFT | \ + PLPRCR_TEXPS ) +#elif defined(CONFIG_80MHz) /* for 80 MHz, we use a 16 MHz clock * 5 */ +#define CFG_PLPRCR \ + ( (5-1)< ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + */ +#if defined(CONFIG_133MHz) +#define CFG_MAMR_PTA 129 +#elif defined(CONFIG_100MHz) +#define CFG_MAMR_PTA 98 +#elif defined(CONFIG_80MHz) +#define CFG_MAMR_PTA 156 +#elif defined(CONFIG_66MHz) +#define CFG_MAMR_PTA 129 +#else /* 50 MHz */ +#define CFG_MAMR_PTA 98 +#endif /*CONFIG_??MHz */ + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SCC1_ENET +#define CONFIG_FEC_ENET +#define CONFIG_ETHPRIME "SCC ETHERNET" + +#endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 6f647f2e8b..d78b727502 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -30,24 +30,24 @@ #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_DBAU1X00 1 -#define CONFIG_AU1X00 1 /* alchemy series cpu */ +#define CONFIG_AU1X00 1 /* alchemy series cpu */ #ifdef CONFIG_DBAU1000 /* Also known as Merlot */ -#define CONFIG_AU1000 1 +#define CONFIG_AU1000 1 #else #ifdef CONFIG_DBAU1100 -#define CONFIG_AU1100 1 +#define CONFIG_AU1100 1 #else #ifdef CONFIG_DBAU1500 -#define CONFIG_AU1500 1 -#else +#define CONFIG_AU1500 1 +#else #error "No valid board set" #endif #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ +#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ @@ -158,7 +158,7 @@ #define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR -/* Offset for data I/O */ +/* Offset for data I/O */ #define CFG_ATA_DATA_OFFSET 8 /* Offset for normal register accesses */ diff --git a/include/dataflash.h b/include/dataflash.h index c40401638a..650454e7ee 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -91,7 +91,6 @@ typedef struct _AT91S_DataFlash { } AT91S_DataFlash, *AT91PS_DataFlash; - typedef struct _AT91S_DATAFLASH_INFO { AT91S_DataflashDesc Desc; diff --git a/include/flash.h b/include/flash.h index 800fb4dcdd..a0c9cadc28 100644 --- a/include/flash.h +++ b/include/flash.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000, 2001 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -165,10 +165,13 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/ #define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */ -#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */ -#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */ -#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */ -#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */ +#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */ +#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */ +#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */ +#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */ + +#define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */ +#define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */ #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ @@ -322,13 +325,15 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */ #define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */ #define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */ -#define FLASH_AMLV320U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */ +#define FLASH_AMLV320U 0x00A2 /* AMD 29LV320M ( 32M = 2M x 16 ) */ #define FLASH_AMLV640U 0x00A4 /* AMD 29LV640M ( 64M = 4M x 16 ) */ #define FLASH_AMLV128U 0x00A6 /* AMD 29LV128M ( 128M = 8M x 16 ) */ +#define FLASH_AMLV320B 0x00A7 /* AMD 29LV320MB ( 32M = 2M x 16 ) */ +#define FLASH_AMLV320T 0x00A8 /* AMD 29LV320MT ( 32M = 2M x 16 ) */ /* Intel 28F256L18T 256M = 128K x 255 + 32k x 4 */ -#define FLASH_28F256L18T 0x00A8 -#define FLASH_AMDL163T 0x00A2 /* AMD AM29DL163T (2M x 16 ) */ -#define FLASH_AMDL163B 0x00A3 +#define FLASH_28F256L18T 0x00B0 +#define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */ +#define FLASH_AMDL163B 0x00B3 #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ diff --git a/include/mpc8xx.h b/include/mpc8xx.h index 4c0c73c765..847c2b4b6b 100644 --- a/include/mpc8xx.h +++ b/include/mpc8xx.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -135,18 +135,18 @@ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 */ #ifdef CONFIG_MPC866_et_al -#define PLPRCR_MF_MSK 0xffff001e /* Multiplication factor + PDF bits */ -#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */ -#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/ -#define PLPRCR_MFD_MSK 0x07c00000 /* Multiplication factor denominator bits */ -#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/ +#define PLPRCR_MF_MSK 0xFFFF001E /* Multiplication factor + PDF bits */ +#define PLPRCR_MFN_MSK 0xF8000000 /* Multiplication factor numerator bits */ +#define PLPRCR_MFN_SHIFT 27 /* Multiplication factor numerator shift*/ +#define PLPRCR_MFD_MSK 0x07C00000 /* Multiplication factor denominator bits */ +#define PLPRCR_MFD_SHIFT 22 /* Multiplication factor denominator shift*/ #define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */ -#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift */ -#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */ -#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift */ +#define PLPRCR_S_SHIFT 20 /* Multiplication factor integer shift */ +#define PLPRCR_MFI_MSK 0x000F0000 /* Multiplication factor integer bits */ +#define PLPRCR_MFI_SHIFT 16 /* Multiplication factor integer shift */ #else -#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */ -#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ +#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */ +#define PLPRCR_MF_SHIFT 20 /* Multiplication factor shift value */ #endif #define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ #define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ @@ -166,8 +166,8 @@ #define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */ #define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */ #ifdef CONFIG_MPC866_et_al -#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */ -#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */ +#define PLPRCR_PDF_MSK 0x0000001E /* Predivision Factor bits */ +#define PLPRCR_PDF_SHIFT 1 /* Predivision Factor shift value */ #define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */ #endif diff --git a/include/pci_ids.h b/include/pci_ids.h index a27d31c964..a5d7ed54fe 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1543,4 +1543,3 @@ #define PCI_DEVICE_ID_SMI_710 0x0710 #define PCI_DEVICE_ID_SMI_712 0x0712 #define PCI_DEVICE_ID_SMI_810 0x0810 - -- cgit v1.2.3