// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2021 PHYTEC Messtechnik GmbH
 * Author: Teresa Remmet <t.remmet@phytec.de>
 */

/ {
	binman: binman {
	};

#ifdef CONFIG_OPTEE
	firmware {
		optee {
			compatible = "linaro,optee-tz";
			method = "smc";
		};
	};
#endif
};

#ifdef CONFIG_FSL_CAAM
&crypto {
	bootph-pre-ram;
};
#endif

&soc {
	bootph-all;
	bootph-pre-ram;
};

&clk {
	bootph-pre-ram;
	bootph-all;
	/delete-property/ assigned-clocks;
	/delete-property/ assigned-clock-parents;
	/delete-property/ assigned-clock-rates;
};

&osc_32k {
	bootph-pre-ram;
	bootph-all;
};

&osc_24m {
	bootph-pre-ram;
	bootph-all;
};

&aips1 {
	bootph-pre-ram;
	bootph-all;
};

&aips2 {
	bootph-pre-ram;
};

&aips3 {
	bootph-pre-ram;
	spba-bus@30800000 {
		bootph-pre-ram;
	};
};

&iomuxc {
	bootph-pre-ram;
};

#ifdef CONFIG_FSL_CAAM
&sec_jr0 {
	bootph-pre-ram;
};

&sec_jr1 {
	bootph-pre-ram;
};

&sec_jr2 {
	bootph-pre-ram;
};
#endif

&binman {
	filename = "flash.bin";
	section {
		pad-byte = <0x00>;

#ifdef CONFIG_IMX_HAB
		nxp-imx8mcst@0 {
			filename = "u-boot-spl-mkimage.signed.bin";
			nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
			nxp,unlock;
			args;	/* Needed by mkimage etype superclass */
#endif

			binman_imx_spl: nxp-imx8mimage {
				filename = "u-boot-spl-mkimage.bin";
				nxp,boot-from = "sd";
				nxp,rom-version = <2>;
				nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
				args;	/* Needed by mkimage etype superclass */

				section {
					filename = "u-boot-spl-ddr.bin";
					pad-byte = <0xff>;
					align-size = <4>;
					align = <4>;

					u-boot-spl {
						align-end = <4>;
					};

					ddr-1d-imem-fw {
						filename = "lpddr4_pmu_train_1d_imem_202006.bin";
						type = "blob-ext";
						align-end = <4>;
					};

					ddr-1d-dmem-fw {
						filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
						type = "blob-ext";
						align-end = <4>;
					};

					ddr-2d-imem-fw {
						filename = "lpddr4_pmu_train_2d_imem_202006.bin";
						type = "blob-ext";
						align-end = <4>;
					};

					ddr-2d-dmem-fw {
						filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
						type = "blob-ext";
						align-end = <4>;
					};
				};
			};
#ifdef CONFIG_IMX_HAB
		};

		nxp-imx8mcst@1 {
			filename = "u-boot-fit.signed.bin";
			nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
			offset = <0x58000>;
			args;	/* Needed by mkimage etype superclass */
#endif

			binman_imx_fit: fit {
				description = "Configuration to load ATF before U-Boot";
				filename = "u-boot.itb";
#ifndef CONFIG_IMX_HAB
				fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
#endif
				fit,fdt-list = "of-list";
				#address-cells = <1>;
				offset = <0x58000>;

				images {
					uboot {
						description = "U-Boot (64-bit)";
						type = "standalone";
						arch = "arm64";
						compression = "none";
						load = <CONFIG_TEXT_BASE>;

						uboot_blob: blob-ext {
							filename = "u-boot-nodtb.bin";
						};
					};

#ifndef CONFIG_ARMV8_PSCI
					atf {
						description = "ARM Trusted Firmware";
						type = "firmware";
						arch = "arm64";
						compression = "none";
						load = <0x970000>;
						entry = <0x970000>;

						atf_blob: atf-blob {
							filename = "bl31.bin";
							type = "atf-bl31";
						};
					};
#endif

#ifdef CONFIG_OPTEE
					tee: tee {
						description = "OP-TEE";
						type = "tee";
						arch = "arm64";
						compression = "none";
						os = "tee";
						load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>;
						entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>;

						tee-os {
							filename = "tee.bin";
						};
					};
#endif

					@fdt-SEQ {
						description = "NAME";
						type = "flat_dt";
						compression = "none";

						blob-ext {
							filename = "u-boot.dtb";
						};
					};
				};

				configurations {
					default = "@config-DEFAULT-SEQ";

					@config-SEQ {
						description = "NAME";
						fdt = "fdt-SEQ";
						firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
#ifdef CONFIG_OPTEE
						loadables = "atf", "tee";
#else
						loadables = "atf";
#endif
#endif
					};
				};
			};
#ifdef CONFIG_IMX_HAB
		};
#endif
	};
};