// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2019 Broadcom.
 */
#include <cpu_func.h>
#include <dm.h>
#include <irq.h>
#include <asm/acpi_table.h>
#include <asm/gic.h>
#include <asm/gic-v3.h>
#include <asm/io.h>
#include <dm/acpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <linux/bitops.h>
#include <linux/printk.h>
#include <linux/sizes.h>

static u32 lpi_id_bits;

#define LPI_NRBITS		lpi_id_bits
#define LPI_PROPBASE_SZ		ALIGN(BIT(LPI_NRBITS), SZ_64K)
#define LPI_PENDBASE_SZ		ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K)

/*
 * gic_v3_its_priv - gic details
 *
 * @gicd_base: gicd base address
 * @gicr_base: gicr base address
 */
struct gic_v3_its_priv {
	ulong gicd_base;
	ulong gicr_base;
	ulong gicr_length;
};

static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv)
{
	struct udevice *dev;
	fdt_addr_t addr;
	fdt_size_t size;
	int ret;

	ret = uclass_get_device_by_driver(UCLASS_IRQ,
					  DM_DRIVER_GET(arm_gic_v3), &dev);
	if (ret) {
		pr_err("%s: failed to get %s irq device\n", __func__,
		       DM_DRIVER_GET(arm_gic_v3)->name);
		return ret;
	}

	addr = dev_read_addr_index(dev, 0);
	if (addr == FDT_ADDR_T_NONE) {
		pr_err("%s: failed to get GICD address\n", __func__);
		return -EINVAL;
	}
	priv->gicd_base = addr;

	addr = dev_read_addr_size_index(dev, 1, &size);
	if (addr == FDT_ADDR_T_NONE) {
		pr_err("%s: failed to get GICR address\n", __func__);
		return -EINVAL;
	}
	priv->gicr_base = addr;
	priv->gicr_length = size;

	return 0;
}

/*
 * Program the GIC LPI configuration tables for all
 * the re-distributors and enable the LPI table
 * base: Configuration table address
 * num_redist: number of redistributors
 */
int gic_lpi_tables_init(u64 base, u32 num_redist)
{
	struct gic_v3_its_priv priv;
	u32 gicd_typer;
	u64 val;
	u64 tmp;
	int i;
	u64 redist_lpi_base;
	u64 pend_base;
	ulong pend_tab_total_sz = num_redist * LPI_PENDBASE_SZ;
	void *pend_tab_va;

	if (gic_v3_its_get_gic_addr(&priv))
		return -EINVAL;

	gicd_typer = readl((uintptr_t)(priv.gicd_base + GICD_TYPER));
	/* GIC support for Locality specific peripheral interrupts (LPI's) */
	if (!(gicd_typer & GICD_TYPER_LPIS)) {
		pr_err("GIC implementation does not support LPI's\n");
		return -EINVAL;
	}

	/*
	 * Check for LPI is disabled for all the redistributors.
	 * Once the LPI table is enabled, can not program the
	 * LPI configuration tables again, unless the GIC is reset.
	 */
	for (i = 0; i < num_redist; i++) {
		u32 offset = i * GIC_REDISTRIBUTOR_OFFSET;

		if ((readl((uintptr_t)(priv.gicr_base + offset))) &
		    GICR_CTLR_ENABLE_LPIS) {
			pr_err("Re-Distributor %d LPI is already enabled\n",
			       i);
			return -EINVAL;
		}
	}

	/* lpi_id_bits to get LPI_PENDBASE_SZ and LPi_PROPBASE_SZ */
	lpi_id_bits = min_t(u32, GICD_TYPER_ID_BITS(gicd_typer),
			    ITS_MAX_LPI_NRBITS);

	/* Set PropBase */
	val = (base |
	       GICR_PROPBASER_INNERSHAREABLE |
	       GICR_PROPBASER_RAWAWB |
	       ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK));

	writeq(val, (uintptr_t)(priv.gicr_base + GICR_PROPBASER));
	tmp = readl((uintptr_t)(priv.gicr_base + GICR_PROPBASER));
	if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) {
		if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) {
			val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |
				GICR_PROPBASER_CACHEABILITY_MASK);
			val |= GICR_PROPBASER_NC;
			writeq(val,
			       (uintptr_t)(priv.gicr_base + GICR_PROPBASER));
		}
	}

	redist_lpi_base = base + LPI_PROPBASE_SZ;
	pend_tab_va = map_physmem(redist_lpi_base, pend_tab_total_sz,
				  MAP_NOCACHE);
	memset(pend_tab_va, 0, pend_tab_total_sz);
	flush_cache((ulong)pend_tab_va, pend_tab_total_sz);
	unmap_physmem(pend_tab_va, MAP_NOCACHE);

	pend_base = priv.gicr_base + GICR_PENDBASER;
	for (i = 0; i < num_redist; i++) {
		u32 offset = i * GIC_REDISTRIBUTOR_OFFSET;

		val = ((redist_lpi_base + (i * LPI_PENDBASE_SZ)) |
			GICR_PENDBASER_INNERSHAREABLE |
			GICR_PENDBASER_RAWAWB |
			GICR_PENDBASER_PTZ);

		writeq(val, (uintptr_t)(pend_base + offset));
		tmp = readq((uintptr_t)(pend_base + offset));
		if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) {
			val &= ~(GICR_PENDBASER_SHAREABILITY_MASK |
				 GICR_PENDBASER_CACHEABILITY_MASK);
			val |= GICR_PENDBASER_NC;
			writeq(val, (uintptr_t)(pend_base + offset));
		}

		/* Enable LPI for the redistributor */
		writel(GICR_CTLR_ENABLE_LPIS,
		       (uintptr_t)(priv.gicr_base + offset));
	}

	return 0;
}

#ifdef CONFIG_ACPIGEN
/**
 * acpi_gicv3_fill_madt() - Fill out the body of the MADT
 *
 * Write GICD and GICR tables based on collected devicetree data.
 *
 * @dev: Device to write ACPI tables for
 * @ctx: ACPI context to write MADT sub-tables to
 * Return: 0 if OK
 */
static int acpi_gicv3_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
{
	struct acpi_madt_gicd *gicd;
	struct acpi_madt_gicr *gicr;

	struct gic_v3_its_priv priv;

	if (gic_v3_its_get_gic_addr(&priv))
		return -EINVAL;

	gicd = ctx->current;
	acpi_write_madt_gicd(gicd, dev_seq(dev), priv.gicd_base, 3);
	acpi_inc(ctx, gicd->length);

	gicr = ctx->current;
	acpi_write_madt_gicr(gicr, priv.gicr_base, priv.gicr_length);
	acpi_inc(ctx, gicr->length);

	return 0;
}

struct acpi_ops gic_v3_acpi_ops = {
	.fill_madt	= acpi_gicv3_fill_madt,
};
#endif

static const struct udevice_id gic_v3_ids[] = {
	{ .compatible = "arm,gic-v3" },
	{}
};

static int arm_gic_v3_of_xlate(struct irq *irq, struct ofnode_phandle_args *args)
{
	if (args->args_count < 3) {
		log_debug("Invalid args_count: %d\n", args->args_count);
		return -EINVAL;
	}

	if (args->args[0] == GIC_SPI)
		irq->id = args->args[1] + 32;
	else
		irq->id = args->args[1] + 16;

	irq->flags = args->args[2];

	return 0;
}

static const struct irq_ops arm_gic_v3_ops = {
	.of_xlate		=  arm_gic_v3_of_xlate,
};

U_BOOT_DRIVER(arm_gic_v3) = {
	.name		= "gic-v3",
	.id		= UCLASS_IRQ,
	.of_match	= gic_v3_ids,
	.ops		= &arm_gic_v3_ops,
#if CONFIG_IS_ENABLED(OF_REAL)
	.bind		= dm_scan_fdt_dev,
#endif
	ACPI_OPS_PTR(&gic_v3_acpi_ops)
};

#ifdef CONFIG_ACPIGEN
/**
 * acpi_gic_its_fill_madt() - Fill out the body of the MADT
 *
 * Write ITS tables based on collected devicetree data.
 *
 * @dev: Device to write ACPI tables for
 * @ctx: ACPI context to write MADT sub-tables to
 * Return: 0 if OK
 */
static int acpi_gic_its_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
{
	struct acpi_madt_its *its;
	fdt_addr_t addr;

	addr = dev_read_addr_index(dev, 0);
	if (addr == FDT_ADDR_T_NONE) {
		pr_err("%s: failed to get GIC ITS address\n", __func__);
		return -EINVAL;
	}

	its = ctx->current;
	acpi_write_madt_its(its, dev_seq(dev), addr);
	acpi_inc(ctx, its->length);

	return 0;
}

struct acpi_ops gic_v3_its_acpi_ops = {
	.fill_madt	= acpi_gic_its_fill_madt,
};
#endif

static const struct udevice_id gic_v3_its_ids[] = {
	{ .compatible = "arm,gic-v3-its" },
	{}
};

U_BOOT_DRIVER(arm_gic_v3_its) = {
	.name		= "gic-v3-its",
	.id		= UCLASS_IRQ,
	.of_match	= gic_v3_its_ids,
	ACPI_OPS_PTR(&gic_v3_its_acpi_ops)
};