CONFIG_ARM=y
CONFIG_SYS_VENDOR="BuR"
CONFIG_SYS_CONFIG_NAME="brzynq"
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SUPPORT_PASSING_ATAGS=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x4000000
CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SOURCE_FILE="env/brcp1"
CONFIG_SF_DEFAULT_SPEED=100000000
CONFIG_SF_DEFAULT_MODE=0x3
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x20000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-brcp1_1r"
CONFIG_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x10000
# CONFIG_SPL_MMC is not set
CONFIG_SPL_STACK_R_ADDR=0x800000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x20000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x600000
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0x2000000
CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x30000
# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_ZYNQ_SDHCI_MAX_FREQ=100000000
CONFIG_TARGET_ZYNQ_BR=y
# CONFIG_EFI_LOADER is not set
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x4000000
CONFIG_SPL_LOAD_FIT_FULL=y
CONFIG_BOOTDELAY=0
CONFIG_OF_ENV_SETUP=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run b_default"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
CONFIG_SPL_MAX_SIZE=0x20000
CONFIG_SPL_PAD_TO=0x0
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
CONFIG_SPL_CPU=y
CONFIG_SPL_I2C=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_HUSH_PARSER=y
CONFIG_HUSH_MODERN_PARSER=y
CONFIG_SYS_PROMPT="-> "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_REDUNDANT=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQPL=y
CONFIG_MAX7320_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ZYNQ_HISPD_BROKEN=y
CONFIG_DM_MTD=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SILICONKAISER=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_S28HX_T=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_MT35XU=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_SPI_FLASH_XTX=y
CONFIG_SPI_FLASH_ZBIT=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_PHY_NATSEMI=y
CONFIG_MII=y
CONFIG_ZYNQ_GEM=y
CONFIG_ZYNQ_SERIAL=y
CONFIG_ZYNQ_QSPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ULPI=y
CONFIG_USB_STORAGE=y
CONFIG_SYS_TIMER_COUNTS_DOWN=y
# CONFIG_SHA256 is not set
CONFIG_SPL_CRC32=y
# CONFIG_SPL_SHA1 is not set