/* * Copyright (C) 2010-2012 Freescale Semiconductor, Inc. * * Configuration settings for the MX6Q SABRE-AI Freescale board. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include /* High Level Configuration Options */ #define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */ #define CONFIG_MXC #define CONFIG_MX6Q #define CONFIG_MX6Q_SABREAUTO #define CONFIG_FLASH_HEADER #define CONFIG_FLASH_HEADER_OFFSET 0x400 #define CONFIG_MX6_CLK32 32768 #define CONFIG_CLKO_SET #define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_ARCH_CPU_INIT #undef CONFIG_ARCH_MMU /* disable MMU first */ #define CONFIG_L2_OFF /* disable L2 cache first*/ #define CONFIG_MX6_HCLK_FREQ 24000000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_64BIT_VSPRINTF #define BOARD_LATE_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SERIAL_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_MXC_GPIO /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers */ #define CONFIG_MXC_UART #define CONFIG_UART_BASE_ADDR UART4_BASE_ADDR /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ #include #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_NET_MULTI 1 #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_DNS #define CONFIG_CMD_I2C #define CONFIG_CMD_IMXOTP /* Enable below configure when supporting nand */ #define CONFIG_CMD_ENV #define CONFIG_CMD_REGUL #define CONFIG_CMD_CLOCK #define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ #undef CONFIG_CMD_IMLS #define CONFIG_CMD_IMX_DOWNLOAD_MODE #define CONFIG_BOOTDELAY 3 #define CONFIG_PRIME "FEC0" #define CONFIG_LOADADDR 0x10800000 /* loadaddr env var */ #define CONFIG_RD_LOADADDR 0x11000000 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ethprime=FEC0\0" \ "bootargs=noinitrd console=ttymxc3,115200n8 " \ "ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rootwait rw "\ "mtdparts=gpmi-nand:16m(boot),16m(kernel),128m(rootfs)\0"\ "bootcmd=nand read ${loadaddr} 0x1000000 0x400000;bootm\0" #define CONFIG_ARP_TIMEOUT 200UL /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "MX6Q ARD U-Boot > " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10010000 #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING #define CONFIG_FEC0_IOBASE ENET_BASE_ADDR #define CONFIG_FEC0_PINMUX -1 #define CONFIG_FEC0_MIIBASE -1 #define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM #define CONFIG_MXC_FEC #define CONFIG_FEC0_PHY_ADDR 1 #define CONFIG_ETH_PRIME #define CONFIG_RMII #define CONFIG_PHY_MICREL_KSZ9021 #define CONFIG_CMD_MII #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_IPADDR 192.168.1.103 #define CONFIG_SERVERIP 192.168.1.101 #define CONFIG_NETMASK 255.255.255.0 /* * OCOTP Configs */ #ifdef CONFIG_CMD_IMXOTP #define CONFIG_IMX_OTP #define IMX_OTP_BASE OCOTP_BASE_ADDR #define IMX_OTP_ADDR_MAX 0x7F #define IMX_OTP_DATA_ERROR_VAL 0xBADABADA #endif /* * I2C Configs */ #ifdef CONFIG_CMD_I2C #define CONFIG_HARD_I2C 1 #define CONFIG_I2C_MXC 1 #define CONFIG_SYS_I2C_PORT I2C3_BASE_ADDR #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0x30 #endif /* * SPI Configs */ #ifdef CONFIG_CMD_SF #define CONFIG_FSL_SF 1 #define CONFIG_SPI_FLASH_IMX_M25PXX 1 #define CONFIG_SPI_FLASH_CS 1 #define CONFIG_IMX_ECSPI #define IMX_CSPI_VER_2_3 1 #define MAX_SPI_BYTES (64 * 4) #endif /* Regulator Configs */ #ifdef CONFIG_CMD_REGUL #define CONFIG_ANATOP_REGULATOR #define CONFIG_CORE_REGULATOR_NAME "vdd1p1" #define CONFIG_PERIPH_REGULATOR_NAME "vdd1p1" #endif /* * GPMI Nand Configs */ /* #define CONFIG_CMD_NAND */ #define CONFIG_CMD_NAND #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_GPMI #define CONFIG_GPMI_NFC_SWAP_BLOCK_MARK #define CONFIG_GPMI_NFC_V2 #define CONFIG_GPMI_REG_BASE GPMI_BASE_ADDR #define CONFIG_BCH_REG_BASE BCH_BASE_ADDR #define NAND_MAX_CHIPS 8 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* NAND is the unique module invoke APBH-DMA */ #define CONFIG_APBH_DMA #define CONFIG_APBH_DMA_V2 #define CONFIG_MXS_DMA_REG_BASE ABPHDMA_BASE_ADDR #endif /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_DDR_BASE_ADDR #define PHYS_SDRAM_1_SIZE (2u * 1024 * 1024 * 1024) #define iomem_valid_addr(addr, size) \ (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH /* Monitor at beginning of flash */ #define CONFIG_FSL_ENV_IN_NAND #define CONFIG_ENV_SECT_SIZE (8 * 1024) #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #if defined(CONFIG_FSL_ENV_IN_NAND) #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_OFFSET 0x100000 #elif defined(CONFIG_FSL_ENV_IN_MMC) #define CONFIG_ENV_IS_IN_MMC 1 #define CONFIG_ENV_OFFSET (768 * 1024) #elif defined(CONFIG_FSL_ENV_IN_SATA) #define CONFIG_ENV_IS_IN_SATA 1 #define CONFIG_SATA_ENV_DEV 0 #define CONFIG_ENV_OFFSET (768 * 1024) #elif defined(CONFIG_FSL_ENV_IN_SF) #define CONFIG_ENV_IS_IN_SPI_FLASH 1 #define CONFIG_ENV_SPI_CS 1 #define CONFIG_ENV_OFFSET 0x40000 #else #define CONFIG_ENV_IS_NOWHERE 1 #endif #endif /* __CONFIG_H */