1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
/*
* Copyright (C) 2013 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <i2c.h>
#include <lcd.h>
#include <spi.h>
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/dp_info.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
static int board_usb_vbus_init(void)
{
struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
samsung_get_base_gpio_part1();
/* Enable VBUS power switch */
s5p_gpio_direction_output(&gpio1->x2, 6, 1);
/* VBUS turn ON time */
mdelay(3);
return 0;
}
#endif
int exynos_init(void)
{
#ifdef CONFIG_USB_EHCI_EXYNOS
board_usb_vbus_init();
#endif
return 0;
}
#ifdef CONFIG_LCD
void cfg_lcd_gpio(void)
{
struct exynos5_gpio_part1 *gpio1 =
(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
/* For Backlight */
s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->b2, 0, 1);
/* LCD power on */
s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->x1, 5, 1);
/* Set Hotplug detect for DP */
s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
}
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
.vl_row = 1600,
.vl_width = 2560,
.vl_height = 1600,
.vl_clkp = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_LOW,
.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
/* wDP panel timing infomation */
.vl_hspw = 32,
.vl_hbpd = 80,
.vl_hfpd = 48,
.vl_vspw = 6,
.vl_vbpd = 37,
.vl_vfpd = 3,
.vl_cmd_allow_len = 0xf,
.win_id = 3,
.cfg_gpio = cfg_lcd_gpio,
.backlight_on = NULL,
.lcd_power_on = NULL,
.reset_lcd = NULL,
.dual_lcd_enabled = 0,
.init_delay = 0,
.power_on_delay = 0,
.reset_delay = 0,
.interface_mode = FIMD_RGB_INTERFACE,
.dp_enabled = 1,
};
static struct edp_device_info edp_info = {
.disp_info = {
.h_res = 2560,
.h_sync_width = 32,
.h_back_porch = 80,
.h_front_porch = 48,
.v_res = 1600,
.v_sync_width = 6,
.v_back_porch = 37,
.v_front_porch = 3,
.v_sync_rate = 60,
},
.lt_info = {
.lt_status = DP_LT_NONE,
},
.video_info = {
.master_mode = 0,
.bist_mode = DP_DISABLE,
.bist_pattern = NO_PATTERN,
.h_sync_polarity = 0,
.v_sync_polarity = 0,
.interlaced = 0,
.color_space = COLOR_RGB,
.dynamic_range = VESA,
.ycbcr_coeff = COLOR_YCBCR601,
.color_depth = COLOR_8,
},
};
static struct exynos_dp_platform_data dp_platform_data = {
.phy_enable = set_dp_phy_ctrl,
.edp_dev_info = &edp_info,
};
void init_panel_info(vidinfo_t *vid)
{
vid->rgb_mode = MODE_RGB_P;
exynos_set_dp_platform_data(&dp_platform_data);
}
#endif
int board_get_revision(void)
{
return 0;
}
|
