path: root/drivers/net/smc911x.c

/*
 * SMSC LAN9[12]1[567] Network driver
 *
 * (c) 2007 Pengutronix, Sascha Hauer <s.hauer <at> pengutronix.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>

#ifdef CONFIG_DRIVER_SMC911X

#include <command.h>
#include <net.h>
#include <miiphy.h>

#define mdelay(n)       udelay((n)*1000)

#define __REG(x)     (*((volatile u32 *)(x)))

/* Below are the register offsets and bit definitions
 * of the Lan911x memory space
 */
#define RX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)

#define TX_DATA_FIFO		 __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
#define	TX_CMD_A_INT_ON_COMP			(0x80000000)
#define	TX_CMD_A_INT_BUF_END_ALGN		(0x03000000)
#define	TX_CMD_A_INT_4_BYTE_ALGN		(0x00000000)
#define	TX_CMD_A_INT_16_BYTE_ALGN		(0x01000000)
#define	TX_CMD_A_INT_32_BYTE_ALGN		(0x02000000)
#define	TX_CMD_A_INT_DATA_OFFSET		(0x001F0000)
#define	TX_CMD_A_INT_FIRST_SEG			(0x00002000)
#define	TX_CMD_A_INT_LAST_SEG			(0x00001000)
#define	TX_CMD_A_BUF_SIZE			(0x000007FF)
#define	TX_CMD_B_PKT_TAG			(0xFFFF0000)
#define	TX_CMD_B_ADD_CRC_DISABLE		(0x00002000)
#define	TX_CMD_B_DISABLE_PADDING		(0x00001000)
#define	TX_CMD_B_PKT_BYTE_LENGTH		(0x000007FF)

#define RX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
#define	RX_STS_PKT_LEN				(0x3FFF0000)
#define	RX_STS_ES				(0x00008000)
#define	RX_STS_BCST				(0x00002000)
#define	RX_STS_LEN_ERR				(0x00001000)
#define	RX_STS_RUNT_ERR				(0x00000800)
#define	RX_STS_MCAST				(0x00000400)
#define	RX_STS_TOO_LONG				(0x00000080)
#define	RX_STS_COLL				(0x00000040)
#define	RX_STS_ETH_TYPE				(0x00000020)
#define	RX_STS_WDOG_TMT				(0x00000010)
#define	RX_STS_MII_ERR				(0x00000008)
#define	RX_STS_DRIBBLING			(0x00000004)
#define	RX_STS_CRC_ERR				(0x00000002)
#define RX_STATUS_FIFO_PEEK 	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
#define TX_STATUS_FIFO		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
#define	TX_STS_TAG				(0xFFFF0000)
#define	TX_STS_ES				(0x00008000)
#define	TX_STS_LOC				(0x00000800)
#define	TX_STS_NO_CARR				(0x00000400)
#define	TX_STS_LATE_COLL			(0x00000200)
#define	TX_STS_MANY_COLL			(0x00000100)
#define	TX_STS_COLL_CNT				(0x00000078)
#define	TX_STS_MANY_DEFER			(0x00000004)
#define	TX_STS_UNDERRUN				(0x00000002)
#define	TX_STS_DEFERRED				(0x00000001)
#define TX_STATUS_FIFO_PEEK	__REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
#define ID_REV			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
#define	ID_REV_CHIP_ID				(0xFFFF0000)  /* RO */
#define	ID_REV_REV_ID				(0x0000FFFF)  /* RO */

#define INT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
#define	INT_CFG_INT_DEAS			(0xFF000000)  /* R/W */
#define	INT_CFG_INT_DEAS_CLR			(0x00004000)
#define	INT_CFG_INT_DEAS_STS			(0x00002000)
#define	INT_CFG_IRQ_INT				(0x00001000)  /* RO */
#define	INT_CFG_IRQ_EN				(0x00000100)  /* R/W */
#define	INT_CFG_IRQ_POL				(0x00000010)  /* R/W Not Affected by SW Reset */
#define	INT_CFG_IRQ_TYPE			(0x00000001)  /* R/W Not Affected by SW Reset */

#define INT_STS			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
#define	INT_STS_SW_INT				(0x80000000)  /* R/WC */
#define	INT_STS_TXSTOP_INT			(0x02000000)  /* R/WC */
#define	INT_STS_RXSTOP_INT			(0x01000000)  /* R/WC */
#define	INT_STS_RXDFH_INT			(0x00800000)  /* R/WC */
#define	INT_STS_RXDF_INT			(0x00400000)  /* R/WC */
#define	INT_STS_TX_IOC				(0x00200000)  /* R/WC */
#define	INT_STS_RXD_INT				(0x00100000)  /* R/WC */
#define	INT_STS_GPT_INT				(0x00080000)  /* R/WC */
#define	INT_STS_PHY_INT				(0x00040000)  /* RO */
#define	INT_STS_PME_INT				(0x00020000)  /* R/WC */
#define	INT_STS_TXSO				(0x00010000)  /* R/WC */
#define	INT_STS_RWT				(0x00008000)  /* R/WC */
#define	INT_STS_RXE				(0x00004000)  /* R/WC */
#define	INT_STS_TXE				(0x00002000)  /* R/WC */
/*#define	INT_STS_ERX		(0x00001000)*/  /* R/WC */
#define	INT_STS_TDFU				(0x00000800)  /* R/WC */
#define	INT_STS_TDFO				(0x00000400)  /* R/WC */
#define	INT_STS_TDFA				(0x00000200)  /* R/WC */
#define	INT_STS_TSFF				(0x00000100)  /* R/WC */
#define	INT_STS_TSFL				(0x00000080)  /* R/WC */
/*#define	INT_STS_RXDF		(0x00000040)*/  /* R/WC */
#define	INT_STS_RDFO				(0x00000040)  /* R/WC */
#define	INT_STS_RDFL				(0x00000020)  /* R/WC */
#define	INT_STS_RSFF				(0x00000010)  /* R/WC */
#define	INT_STS_RSFL				(0x00000008)  /* R/WC */
#define	INT_STS_GPIO2_INT			(0x00000004)  /* R/WC */
#define	INT_STS_GPIO1_INT			(0x00000002)  /* R/WC */
#define	INT_STS_GPIO0_INT			(0x00000001)  /* R/WC */
#define INT_EN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
#define	INT_EN_SW_INT_EN			(0x80000000)  /* R/W */
#define	INT_EN_TXSTOP_INT_EN			(0x02000000)  /* R/W */
#define	INT_EN_RXSTOP_INT_EN			(0x01000000)  /* R/W */
#define	INT_EN_RXDFH_INT_EN			(0x00800000)  /* R/W */
/*#define	INT_EN_RXDF_INT_EN		(0x00400000)*/  /* R/W */
#define	INT_EN_TIOC_INT_EN			(0x00200000)  /* R/W */
#define	INT_EN_RXD_INT_EN			(0x00100000)  /* R/W */
#define	INT_EN_GPT_INT_EN			(0x00080000)  /* R/W */
#define	INT_EN_PHY_INT_EN			(0x00040000)  /* R/W */
#define	INT_EN_PME_INT_EN			(0x00020000)  /* R/W */
#define	INT_EN_TXSO_EN				(0x00010000)  /* R/W */
#define	INT_EN_RWT_EN				(0x00008000)  /* R/W */
#define	INT_EN_RXE_EN				(0x00004000)  /* R/W */
#define	INT_EN_TXE_EN				(0x00002000)  /* R/W */
/*#define	INT_EN_ERX_EN			(0x00001000)*/  /* R/W */
#define	INT_EN_TDFU_EN				(0x00000800)  /* R/W */
#define	INT_EN_TDFO_EN				(0x00000400)  /* R/W */
#define	INT_EN_TDFA_EN				(0x00000200)  /* R/W */
#define	INT_EN_TSFF_EN				(0x00000100)  /* R/W */
#define	INT_EN_TSFL_EN				(0x00000080)  /* R/W */
/*#define	INT_EN_RXDF_EN			(0x00000040)*/  /* R/W */
#define	INT_EN_RDFO_EN				(0x00000040)  /* R/W */
#define	INT_EN_RDFL_EN				(0x00000020)  /* R/W */
#define	INT_EN_RSFF_EN				(0x00000010)  /* R/W */
#define	INT_EN_RSFL_EN				(0x00000008)  /* R/W */
#define	INT_EN_GPIO2_INT			(0x00000004)  /* R/W */
#define	INT_EN_GPIO1_INT			(0x00000002)  /* R/W */
#define	INT_EN_GPIO0_INT			(0x00000001)  /* R/W */

#define BYTE_TEST		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
#define FIFO_INT		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
#define	FIFO_INT_TX_AVAIL_LEVEL			(0xFF000000)  /* R/W */
#define	FIFO_INT_TX_STS_LEVEL			(0x00FF0000)  /* R/W */
#define	FIFO_INT_RX_AVAIL_LEVEL			(0x0000FF00)  /* R/W */
#define	FIFO_INT_RX_STS_LEVEL			(0x000000FF)  /* R/W */

#define RX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
#define	RX_CFG_RX_END_ALGN			(0xC0000000)  /* R/W */
#define		RX_CFG_RX_END_ALGN4		(0x00000000)  /* R/W */
#define		RX_CFG_RX_END_ALGN16		(0x40000000)  /* R/W */
#define		RX_CFG_RX_END_ALGN32		(0x80000000)  /* R/W */
#define	RX_CFG_RX_DMA_CNT			(0x0FFF0000)  /* R/W */
#define	RX_CFG_RX_DUMP				(0x00008000)  /* R/W */
#define	RX_CFG_RXDOFF				(0x00001F00)  /* R/W */
/*#define	RX_CFG_RXBAD			(0x00000001)*/  /* R/W */

#define TX_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
/*#define	TX_CFG_TX_DMA_LVL		(0xE0000000)*/	 /* R/W */
/*#define	TX_CFG_TX_DMA_CNT		(0x0FFF0000)*/	 /* R/W Self Clearing */
#define	TX_CFG_TXS_DUMP				(0x00008000)  /* Self Clearing */
#define	TX_CFG_TXD_DUMP				(0x00004000)  /* Self Clearing */
#define	TX_CFG_TXSAO				(0x00000004)  /* R/W */
#define	TX_CFG_TX_ON				(0x00000002)  /* R/W */
#define	TX_CFG_STOP_TX				(0x00000001)  /* Self Clearing */

#define HW_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
#define	HW_CFG_TTM				(0x00200000)  /* R/W */
#define	HW_CFG_SF				(0x00100000)  /* R/W */
#define	HW_CFG_TX_FIF_SZ			(0x000F0000)  /* R/W */
#define	HW_CFG_TR				(0x00003000)  /* R/W */
#define	HW_CFG_PHY_CLK_SEL			(0x00000060)  /* R/W */
#define	HW_CFG_PHY_CLK_SEL_INT_PHY 		(0x00000000) /* R/W */
#define	HW_CFG_PHY_CLK_SEL_EXT_PHY 		(0x00000020) /* R/W */
#define	HW_CFG_PHY_CLK_SEL_CLK_DIS 		(0x00000040) /* R/W */
#define	HW_CFG_SMI_SEL				(0x00000010)  /* R/W */
#define	HW_CFG_EXT_PHY_DET			(0x00000008)  /* RO */
#define	HW_CFG_EXT_PHY_EN			(0x00000004)  /* R/W */
#define	HW_CFG_32_16_BIT_MODE			(0x00000004)  /* RO */
#define	HW_CFG_SRST_TO				(0x00000002)  /* RO */
#define	HW_CFG_SRST				(0x00000001)  /* Self Clearing */

#define RX_DP_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
#define	RX_DP_CTRL_RX_FFWD			(0x80000000)  /* R/W */
#define	RX_DP_CTRL_FFWD_BUSY			(0x80000000)  /* RO */

#define RX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
#define	 RX_FIFO_INF_RXSUSED			(0x00FF0000)  /* RO */
#define	 RX_FIFO_INF_RXDUSED			(0x0000FFFF)  /* RO */

#define TX_FIFO_INF		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
#define	TX_FIFO_INF_TSUSED			(0x00FF0000)  /* RO */
#define	TX_FIFO_INF_TDFREE			(0x0000FFFF)  /* RO */

#define PMT_CTRL		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
#define	PMT_CTRL_PM_MODE			(0x00003000)  /* Self Clearing */
#define	PMT_CTRL_PHY_RST			(0x00000400)  /* Self Clearing */
#define	PMT_CTRL_WOL_EN				(0x00000200)  /* R/W */
#define	PMT_CTRL_ED_EN				(0x00000100)  /* R/W */
#define	PMT_CTRL_PME_TYPE			(0x00000040)  /* R/W Not Affected by SW Reset */
#define	PMT_CTRL_WUPS				(0x00000030)  /* R/WC */
#define	PMT_CTRL_WUPS_NOWAKE			(0x00000000)  /* R/WC */
#define	PMT_CTRL_WUPS_ED			(0x00000010)  /* R/WC */
#define	PMT_CTRL_WUPS_WOL			(0x00000020)  /* R/WC */
#define	PMT_CTRL_WUPS_MULTI			(0x00000030)  /* R/WC */
#define	PMT_CTRL_PME_IND			(0x00000008)  /* R/W */
#define	PMT_CTRL_PME_POL			(0x00000004)  /* R/W */
#define	PMT_CTRL_PME_EN				(0x00000002)  /* R/W Not Affected by SW Reset */
#define	PMT_CTRL_READY				(0x00000001)  /* RO */

#define GPIO_CFG		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
#define	GPIO_CFG_LED3_EN			(0x40000000)  /* R/W */
#define	GPIO_CFG_LED2_EN			(0x20000000)  /* R/W */
#define	GPIO_CFG_LED1_EN			(0x10000000)  /* R/W */
#define	GPIO_CFG_GPIO2_INT_POL			(0x04000000)  /* R/W */
#define	GPIO_CFG_GPIO1_INT_POL			(0x02000000)  /* R/W */
#define	GPIO_CFG_GPIO0_INT_POL			(0x01000000)  /* R/W */
#define	GPIO_CFG_EEPR_EN			(0x00700000)  /* R/W */
#define	GPIO_CFG_GPIOBUF2			(0x00040000)  /* R/W */
#define	GPIO_CFG_GPIOBUF1			(0x00020000)  /* R/W */
#define	GPIO_CFG_GPIOBUF0			(0x00010000)  /* R/W */
#define	GPIO_CFG_GPIODIR2			(0x00000400)  /* R/W */
#define	GPIO_CFG_GPIODIR1			(0x00000200)  /* R/W */
#define	GPIO_CFG_GPIODIR0			(0x00000100)  /* R/W */
#define	GPIO_CFG_GPIOD4				(0x00000010)  /* R/W */
#define	GPIO_CFG_GPIOD3				(0x00000008)  /* R/W */
#define	GPIO_CFG_GPIOD2				(0x00000004)  /* R/W */
#define	GPIO_CFG_GPIOD1				(0x00000002)  /* R/W */
#define	GPIO_CFG_GPIOD0				(0x00000001)  /* R/W */

#define GPT_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
#define	GPT_CFG_TIMER_EN			(0x20000000)  /* R/W */
#define	GPT_CFG_GPT_LOAD			(0x0000FFFF)  /* R/W */

#define GPT_CNT			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
#define	GPT_CNT_GPT_CNT				(0x0000FFFF)  /* RO */

#define ENDIAN			__REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
#define FREE_RUN		__REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
#define RX_DROP			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
#define MAC_CSR_CMD		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
#define	 MAC_CSR_CMD_CSR_BUSY			(0x80000000)  /* Self Clearing */
#define	 MAC_CSR_CMD_R_NOT_W			(0x40000000)  /* R/W */
#define	 MAC_CSR_CMD_CSR_ADDR			(0x000000FF)  /* R/W */

#define MAC_CSR_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
#define AFC_CFG			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
#define		AFC_CFG_AFC_HI			(0x00FF0000)  /* R/W */
#define		AFC_CFG_AFC_LO			(0x0000FF00)  /* R/W */
#define		AFC_CFG_BACK_DUR		(0x000000F0)  /* R/W */
#define		AFC_CFG_FCMULT			(0x00000008)  /* R/W */
#define		AFC_CFG_FCBRD			(0x00000004)  /* R/W */
#define		AFC_CFG_FCADD			(0x00000002)  /* R/W */
#define		AFC_CFG_FCANY			(0x00000001)  /* R/W */

#define E2P_CMD			__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
#define		E2P_CMD_EPC_BUSY		(0x80000000)  /* Self Clearing */
#define		E2P_CMD_EPC_CMD			(0x70000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_READ		(0x00000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_EWDS		(0x10000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_EWEN		(0x20000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_WRITE		(0x30000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_WRAL		(0x40000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_ERASE		(0x50000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_ERAL		(0x60000000)  /* R/W */
#define		E2P_CMD_EPC_CMD_RELOAD		(0x70000000)  /* R/W */
#define		E2P_CMD_EPC_TIMEOUT		(0x00000200)  /* RO */
#define		E2P_CMD_MAC_ADDR_LOADED		(0x00000100)  /* RO */
#define		E2P_CMD_EPC_ADDR		(0x000000FF)  /* R/W */

#define E2P_DATA		__REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
#define	E2P_DATA_EEPROM_DATA			(0x000000FF)  /* R/W */
/* end of LAN register offsets and bit definitions */

/* MAC Control and Status registers */
#define MAC_CR			(0x01)  /* R/W */

/* MAC_CR - MAC Control Register */
#define MAC_CR_RXALL			(0x80000000)
/* TODO: delete this bit? It is not described in the data sheet. */
#define MAC_CR_HBDIS			(0x10000000)
#define MAC_CR_RCVOWN			(0x00800000)
#define MAC_CR_LOOPBK			(0x00200000)
#define MAC_CR_FDPX			(0x00100000)
#define MAC_CR_MCPAS			(0x00080000)
#define MAC_CR_PRMS			(0x00040000)
#define MAC_CR_INVFILT			(0x00020000)
#define MAC_CR_PASSBAD			(0x00010000)
#define MAC_CR_HFILT			(0x00008000)
#define MAC_CR_HPFILT			(0x00002000)
#define MAC_CR_LCOLL			(0x00001000)
#define MAC_CR_BCAST			(0x00000800)
#define MAC_CR_DISRTY			(0x00000400)
#define MAC_CR_PADSTR			(0x00000100)
#define MAC_CR_BOLMT_MASK		(0x000000C0)
#define MAC_CR_DFCHK			(0x00000020)
#define MAC_CR_TXEN			(0x00000008)
#define MAC_CR_RXEN			(0x00000004)

#define ADDRH			(0x02)	  /* R/W mask 0x0000FFFFUL */
#define ADDRL			(0x03)	  /* R/W mask 0xFFFFFFFFUL */
#define HASHH			(0x04)	  /* R/W */
#define HASHL			(0x05)	  /* R/W */

#define MII_ACC			(0x06)	  /* R/W */
#define MII_ACC_PHY_ADDR		(0x0000F800)
#define MII_ACC_MIIRINDA		(0x000007C0)
#define MII_ACC_MII_WRITE		(0x00000002)
#define MII_ACC_MII_BUSY		(0x00000001)

#define MII_DATA		(0x07)	  /* R/W mask 0x0000FFFFUL */

#define FLOW			(0x08)	  /* R/W */
#define FLOW_FCPT			(0xFFFF0000)
#define FLOW_FCPASS			(0x00000004)
#define FLOW_FCEN			(0x00000002)
#define FLOW_FCBSY			(0x00000001)

#define VLAN1			(0x09)	  /* R/W mask 0x0000FFFFUL */
#define VLAN1_VTI1			(0x0000ffff)

#define VLAN2			(0x0A)	  /* R/W mask 0x0000FFFFUL */
#define VLAN2_VTI2			(0x0000ffff)

#define WUFF			(0x0B)	  /* WO */

#define WUCSR			(0x0C)	  /* R/W */
#define WUCSR_GUE			(0x00000200)
#define WUCSR_WUFR			(0x00000040)
#define WUCSR_MPR			(0x00000020)
#define WUCSR_WAKE_EN			(0x00000004)
#define WUCSR_MPEN			(0x00000002)

/* Chip ID values */
#define CHIP_9115	0x115
#define CHIP_9116	0x116
#define CHIP_9117	0x117
#define CHIP_9118	0x118
#define CHIP_9215	0x115a
#define CHIP_9216	0x116a
#define CHIP_9217	0x117a
#define CHIP_9218	0x118a

struct chip_id {
	u16 id;
	char *name;
};

static const struct chip_id chip_ids[] =  {
	{ CHIP_9115, "LAN9115" },
	{ CHIP_9116, "LAN9116" },
	{ CHIP_9117, "LAN9117" },
	{ CHIP_9118, "LAN9118" },
	{ CHIP_9215, "LAN9215" },
	{ CHIP_9216, "LAN9216" },
	{ CHIP_9217, "LAN9217" },
	{ CHIP_9218, "LAN9218" },
	{ 0, NULL },
};

#define DRIVERNAME "smc911x"

u32 smc911x_get_mac_csr(u8 reg)
{
	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);

	return MAC_CSR_DATA;
}

void smc911x_set_mac_csr(u8 reg, u32 data)
{
	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
	MAC_CSR_DATA = data;
	MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
	while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
}

static int smx911x_handle_mac_address(bd_t *bd)
{
	unsigned long addrh, addrl;
	unsigned char *m = bd->bi_enetaddr;

	/* if the environment has a valid mac address then use it */
	if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
		addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
		addrh = m[4] | m[5] << 8;
		smc911x_set_mac_csr(ADDRH, addrh);
		smc911x_set_mac_csr(ADDRL, addrl);
	} else {
		/* if not, try to get one from the eeprom */
		addrh = smc911x_get_mac_csr(ADDRH);
		addrl = smc911x_get_mac_csr(ADDRL);

		m[0] = (addrl       ) & 0xff;
		m[1] = (addrl >>  8 ) & 0xff;
		m[2] = (addrl >> 16 ) & 0xff;
		m[3] = (addrl >> 24 ) & 0xff;
		m[4] = (addrh       ) & 0xff;
		m[5] = (addrh >>  8 ) & 0xff;

		/* we get 0xff when there is no eeprom connected */
		if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
			printf(DRIVERNAME ": no valid mac address in environment "
				"and no eeprom found\n");
			return -1;
		}
	}

	printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
		m[0], m[1], m[2], m[3], m[4], m[5]);

	return 0;
}

static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
{
	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);

	smc911x_set_mac_csr( MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);

	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);

	*val = smc911x_get_mac_csr(MII_DATA);

	return 0;
}

static int smc911x_miiphy_write(u8 phy, u8 reg, u16  val)
{
	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);

	smc911x_set_mac_csr(MII_DATA, val);
	smc911x_set_mac_csr(MII_ACC,
		phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);

	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
	return 0;
}

static int smc911x_phy_reset(void)
{
	u32 reg;

	reg = PMT_CTRL;
	reg &= ~0xfffff030;
	reg |= PMT_CTRL_PHY_RST;
	PMT_CTRL = reg;

	mdelay(100);

	return 0;
}

static void smc911x_phy_configure(void)
{
	int timeout;
	u16 status;

	smc911x_phy_reset();

	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
	mdelay(1);
	smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);

	timeout = 5000;
	do {
		mdelay(1);
		if ((timeout--) == 0)
			goto err_out;

		if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
			goto err_out;
	} while (!(status & PHY_BMSR_LS));

	printf(DRIVERNAME ": phy initialized\n");

	return;

err_out:
	printf(DRIVERNAME ": autonegotiation timed out\n");
}

static void smc911x_reset(void)
{
	int timeout;

	/* Take out of PM setting first */
	if (PMT_CTRL & PMT_CTRL_READY) {
		/* Write to the bytetest will take out of powerdown */
		BYTE_TEST = 0x0;

		timeout = 10;

		while ( timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
			udelay(10);
		if (!timeout) {
			printf(DRIVERNAME
				": timeout waiting for PM restore\n");
			return;
		}
	}

	/* Disable interrupts */
	INT_EN = 0;

	HW_CFG = HW_CFG_SRST;

	timeout = 1000;
	while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
		udelay(10);

	if(!timeout) {
		printf(DRIVERNAME ": reset timeout\n");
		return;
	}

	/* Reset the FIFO level and flow control settings */
	smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
	AFC_CFG = 0x0050287F;

	/* Set to LED outputs */
	GPIO_CFG = 0x70070000;
}

static void smc911x_enable(void)
{
	/* Enable TX */
	HW_CFG = 8 << 16 | HW_CFG_SF;

	GPT_CFG = GPT_CFG_TIMER_EN | 10000;

	TX_CFG = TX_CFG_TX_ON;

	/* no padding to start of packets */
	RX_CFG = 0;

	smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);

}

int eth_init(bd_t *bd)
{
	unsigned long val, i;

	printf(DRIVERNAME ": initializing\n");

	val = BYTE_TEST;
	if(val != 0x87654321) {
		printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
		goto err_out;
	}

	val = ID_REV >> 16;
	for(i = 0; chip_ids[i].id != 0; i++) {
		if (chip_ids[i].id == val) break;
	}
	if (!chip_ids[i].id) {
		printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
		goto err_out;
	}

	printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);

	smc911x_reset();

	/* Configure the PHY, initialize the link state */
	smc911x_phy_configure();

	if (smx911x_handle_mac_address(bd))
		goto err_out;

	/* Turn on Tx + Rx */
	smc911x_enable();

	return 0;

err_out:
	return -1;
}

int eth_send(volatile void *packet, int length)
{
	u32 *data = (u32*)packet;
	u32 tmplen;
	u32 status;

	TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
	TX_DATA_FIFO = length;

	tmplen = (length + 3) / 4;

	while(tmplen--)
		TX_DATA_FIFO = *data++;

	/* wait for transmission */
	while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));

	/* get status. Ignore 'no carrier' error, it has no meaning for
	 * full duplex operation
	 */
	status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
		TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);

	if(!status)
		return 0;

	printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
		status & TX_STS_LOC ? "TX_STS_LOC " : "",
		status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
		status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
		status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
		status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");

	return -1;
}

void eth_halt(void)
{
	smc911x_reset();
}

int eth_rx(void)
{
	u32 *data = (u32 *)NetRxPackets[0];
	u32 pktlen, tmplen;
	u32 status;

	if((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
		status = RX_STATUS_FIFO;
		pktlen = (status & RX_STS_PKT_LEN) >> 16;

		RX_CFG = 0;

		tmplen = (pktlen + 2+ 3) / 4;
		while(tmplen--)
			*data++ = RX_DATA_FIFO;

		if(status & RX_STS_ES)
			printf(DRIVERNAME
				": dropped bad packet. Status: 0x%08x\n",
				status);
		else
			NetReceive(NetRxPackets[0], pktlen);
	}

	return 0;
}

#endif				/* CONFIG_DRIVER_SMC911X */