path: root/include/asm-blackfin/arch-bf533/defBF532.h

/*
 * defBF532.h
 *
 * This file is subject to the terms and conditions of the GNU Public
 * License. See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Non-GPL License also available as part of VisualDSP++
 *
 * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
 *
 * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
 *
 * This file under source code control, please send bugs or changes to:
 * dsptools.support@analog.com
 *
 */

/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */

#ifndef _DEF_BF532_H
#define _DEF_BF532_H

/*
 * #if !defined(__ADSPLPBLACKFIN__)
 * #warning defBF532.h should only be included for 532 compatible chips
 * #endif
 */

/* include all Core registers and bit definitions */
#include <asm/arch-common/def_LPBlackfin.h>

/* Helper macros
 * usage:
 *  P0.H = HI(UART_THR);
 *  P0.L = LO(UART_THR);
 */

#define LO(con32)		((con32) & 0xFFFF)
#define lo(con32)		((con32) & 0xFFFF)
#define HI(con32)		(((con32) >> 16) & 0xFFFF)
#define hi(con32)		(((con32) >> 16) & 0xFFFF)

/*
 * System MMR Register Map
 */

/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
#define PLL_CTL			0xFFC00000	/* PLL Control register (16-bit) */
#define PLL_DIV			0xFFC00004	/* PLL Divide Register (16-bit) */
#define VR_CTL			0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
#define PLL_STAT		0xFFC0000C	/* PLL Status register (16-bit) */
#define PLL_LOCKCNT		0xFFC00010	/* PLL Lock Count register (16-bit) */
#define	CHIPID			0xFFC00014	/* Chip ID register (32-bit)    */
#define SWRST			0xFFC00100	/* Software Reset Register (16-bit) */
#define SYSCR			0xFFC00104	/* System Configuration register */

/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
#define SIC_RVECT		0xFFC00108	/* Interrupt Reset Vector Address Register */
#define SIC_IMASK		0xFFC0010C	/* Interrupt Mask Register */
#define SIC_IAR0		0xFFC00110	/* Interrupt Assignment Register 0 */
#define SIC_IAR1		0xFFC00114	/* Interrupt Assignment Register 1 */
#define SIC_IAR2		0xFFC00118	/* Interrupt Assignment Register 2 */
#define SIC_ISR			0xFFC00120	/* Interrupt Status Register */
#define SIC_IWR			0xFFC00124	/* Interrupt Wakeup Register */

/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
#define WDOG_CTL		0xFFC00200	/* Watchdog Control Register */
#define WDOG_CNT		0xFFC00204	/* Watchdog Count Register */
#define WDOG_STAT		0xFFC00208	/* Watchdog Status Register */

/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
#define RTC_STAT		0xFFC00300	/* RTC Status Register */
#define RTC_ICTL		0xFFC00304	/* RTC Interrupt Control Register */
#define RTC_ISTAT		0xFFC00308	/* RTC Interrupt Status Register */
#define RTC_SWCNT		0xFFC0030C	/* RTC Stopwatch Count Register */
#define RTC_ALARM		0xFFC00310	/* RTC Alarm Time Register */
#define RTC_FAST		0xFFC00314	/* RTC Prescaler Enable Register */
#define RTC_PREN		0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */

/* UART Controller (0xFFC00400 - 0xFFC004FF) */
#define UART_THR		0xFFC00400	/* Transmit Holding register */
#define UART_RBR		0xFFC00400	/* Receive Buffer register */
#define UART_DLL		0xFFC00400	/* Divisor Latch (Low-Byte) */
#define UART_IER		0xFFC00404	/* Interrupt Enable Register */
#define UART_DLH		0xFFC00404	/* Divisor Latch (High-Byte) */
#define UART_IIR		0xFFC00408	/* Interrupt Identification Register */
#define UART_LCR		0xFFC0040C	/* Line Control Register */
#define UART_MCR		0xFFC00410	/* Modem Control Register */
#define UART_LSR		0xFFC00414	/* Line Status Register */
/* #define UART_MSR 0xFFC00418 *//* Modem Status Register (UNUSED in ADSP-BF532) */
#define UART_SCR		0xFFC0041C	/* SCR Scratch Register */
#define UART_GCTL		0xFFC00424	/* Global Control Register */

/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
#define SPI_CTL			0xFFC00500	/* SPI Control Register */
#define SPI_FLG			0xFFC00504	/* SPI Flag register */
#define SPI_STAT		0xFFC00508	/* SPI Status register */
#define SPI_TDBR		0xFFC0050C	/* SPI Transmit Data Buffer Register */
#define SPI_RDBR		0xFFC00510	/* SPI Receive Data Buffer Register */
#define SPI_BAUD		0xFFC00514	/* SPI Baud rate Register */
#define SPI_SHADOW		0xFFC00518	/* SPI_RDBR Shadow Register */

/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register */
#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register */
#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register */
#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register */

#define TIMER1_CONFIG		0xFFC00610	/*  Timer 1 Configuration Register */
#define TIMER1_COUNTER		0xFFC00614	/*  Timer 1 Counter Register */
#define TIMER1_PERIOD		0xFFC00618	/*  Timer 1 Period Register */
#define TIMER1_WIDTH		0xFFC0061C	/*  Timer 1 Width Register */

#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register */
#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register */
#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register */
#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register */

#define TIMER_ENABLE		0xFFC00640	/* Timer Enable Register */
#define TIMER_DISABLE		0xFFC00644	/* Timer Disable Register */
#define TIMER_STATUS		0xFFC00648	/* Timer Status Register */

/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */
#define FIO_FLAG_D		0xFFC00700	/* Flag Mask to directly specify state of pins */
#define FIO_FLAG_C		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
#define FIO_FLAG_S		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
#define FIO_FLAG_T		0xFFC0070C	/* Flag Mask to directly toggle state of pins */
#define FIO_MASKA_D		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
#define FIO_MASKA_C		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
#define FIO_MASKA_S		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
#define FIO_MASKA_T		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
#define FIO_MASKB_D		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
#define FIO_MASKB_C		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
#define FIO_MASKB_S		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
#define FIO_MASKB_T		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
#define FIO_DIR			0xFFC00730	/* Peripheral Flag Direction Register */
#define FIO_POLAR		0xFFC00734	/* Flag Source Polarity Register */
#define FIO_EDGE		0xFFC00738	/* Flag Source Sensitivity Register */
#define FIO_BOTH		0xFFC0073C	/* Flag Set on BOTH Edges Register */
#define FIO_INEN		0xFFC00740	/* Flag Input Enable Register */

/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
#define SPORT0_TCR1		0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2		0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider */
#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
#define SPORT0_TX		0xFFC00810	/* SPORT0 TX Data Register */
#define SPORT0_RX		0xFFC00818	/* SPORT0 RX Data Register */
#define SPORT0_RCR1		0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_RCR2		0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider */
#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
#define SPORT0_STAT		0xFFC00830	/* SPORT0 Status Register */
#define SPORT0_CHNL		0xFFC00834	/* SPORT0 Current Channel Register */
#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */

/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
#define SPORT1_TCR1		0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_TCR2		0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider */
#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
#define SPORT1_TX		0xFFC00910	/* SPORT1 TX Data Register */
#define SPORT1_RX		0xFFC00918	/* SPORT1 RX Data Register */
#define SPORT1_RCR1		0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_RCR2		0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider */
#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
#define SPORT1_STAT		0xFFC00930	/* SPORT1 Status Register */
#define SPORT1_CHNL		0xFFC00934	/* SPORT1 Current Channel Register */
#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */

/* Asynchronous Memory Controller - External Bus Interface Unit */
#define EBIU_AMGCTL		0xFFC00A00	/* Asynchronous Memory Global Control Register */
#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */

/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
#define EBIU_SDGCTL		0xFFC00A10	/* SDRAM Global Control Register */
#define EBIU_SDBCTL		0xFFC00A14	/* SDRAM Bank Control Register */
#define EBIU_SDRRC		0xFFC00A18	/* SDRAM Refresh Rate Control Register */
#define EBIU_SDSTAT		0xFFC00A1C	/* SDRAM Status Register */

/* DMA Test Registers */
#define DMA_CCOMP		0xFFC00B04	/* DMA Cycle Count Register */
#define DMA_ACOMP		0xFFC00B00	/* Debug Compare Address Register */
#define DMA_MISR		0xFFC00B08	/* MISR Register */
#define DMA_TCPER		0xFFC00B0C	/* Traffic Control Periods Register */
#define DMA_TCCNT		0xFFC00B10	/* Traffic Control Current Counts Register */
#define DMA_TMODE		0xFFC00B14	/* DMA Test Modes Register */
#define DMA_TMCHAN		0xFFC00B18	/* DMA Testmode Selected Channel Register */
#define DMA_TMSTAT		0xFFC00B1C	/* DMA Testmode Channel Status Register */
#define DMA_TMBD		0xFFC00B20	/* DMA Testmode DAB Bus Data Register */
#define DMA_TMM0D		0xFFC00B24	/* DMA Testmode Mem0 Data Register */
#define DMA_TMM1D		0xFFC00B28	/* DMA Testmode Mem1 Data Register */
#define DMA_TMMA		0xFFC00B2C	/* DMA Testmode Memory Address Register */

/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */

#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */

#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */

#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */

#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */

#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */

#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */

#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */

#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */

#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */

#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */

#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */

/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
#define PPI_CONTROL		0xFFC01000	/* PPI Control Register */
#define PPI_STATUS		0xFFC01004	/* PPI Status Register */
#define PPI_COUNT		0xFFC01008	/* PPI Transfer Count Register */
#define PPI_DELAY		0xFFC0100C	/* PPI Delay Count Register */
#define PPI_FRAME		0xFFC01010	/* PPI Frame Length Register */

/*
 * System MMR Register Bits
 */
/*
 * PLL AND RESET MASKS
 */

/* PLL_CTL Masks */
#define PLL_CLKIN		0x00000000	/* Pass CLKIN to PLL */
#define PLL_CLKIN_DIV2		0x00000001	/* Pass CLKIN/2 to PLL */
#define PLL_OFF			0x00000002	/* Shut off PLL clocks */
#define STOPCK_OFF		0x00000008	/* Core clock off */
#define PDWN			0x00000020	/* Put the PLL in a Deep Sleep state */
#define BYPASS			0x00000100	/* Bypass the PLL */

/* PLL_DIV Masks */
#define SCLK_DIV(x)		(x)	/* SCLK = VCO / x */

#define CCLK_DIV1		0x00000000	/* CCLK = VCO / 1 */
#define CCLK_DIV2		0x00000010	/* CCLK = VCO / 2 */
#define CCLK_DIV4		0x00000020	/* CCLK = VCO / 4 */
#define CCLK_DIV8		0x00000030	/* CCLK = VCO / 8 */

/* SWRST Mask */
#define SYSTEM_RESET		0x00000007	/* Initiates a system software reset */

/*
 * SYSTEM INTERRUPT CONTROLLER MASKS
 */

/* SIC_IAR0 Masks */
#define P0_IVG(x)		((x)-7)	/* Peripheral #0 assigned IVG #x */
#define P1_IVG(x)		((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x */
#define P2_IVG(x)		((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x */
#define P3_IVG(x)		((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x */
#define P4_IVG(x)		((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x */
#define P5_IVG(x)		((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x */
#define P6_IVG(x)		((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x */
#define P7_IVG(x)		((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x */

/* SIC_IAR1 Masks */
#define P8_IVG(x)		((x)-7)	/* Peripheral #8 assigned IVG #x */
#define P9_IVG(x)		((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x */
#define P10_IVG(x)		((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x */
#define P11_IVG(x)		((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x */
#define P12_IVG(x)		((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x */
#define P13_IVG(x)		((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x */
#define P14_IVG(x)		((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x */
#define P15_IVG(x)		((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x */

/* SIC_IAR2 Masks */
#define P16_IVG(x)		((x)-7)	/* Peripheral #16 assigned IVG #x */
#define P17_IVG(x)		((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x */
#define P18_IVG(x)		((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x */
#define P19_IVG(x)		((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x */
#define P20_IVG(x)		((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x */
#define P21_IVG(x)		((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x */
#define P22_IVG(x)		((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x */
#define P23_IVG(x)		((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x */

/* SIC_IMASK Masks */
#define SIC_UNMASK_ALL		0x00000000	/* Unmask all peripheral interrupts */
#define SIC_MASK_ALL		0xFFFFFFFF	/* Mask all peripheral interrupts */
#define SIC_MASK(x)		(1 << (x))	/* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x)		(0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */

/* SIC_IWR Masks */
#define IWR_DISABLE_ALL		0x00000000	/* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL		0xFFFFFFFF	/* Wakeup Enable all peripherals */
#define IWR_ENABLE(x)		(1 << (x))	/* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x)		(0xFFFFFFFF ^ (1 << (x)))	/*  Wakeup Disable Peripheral #x */

/*
 * WATCHDOG TIMER MASKS
 */
/* Watchdog Timer WDOG_CTL Register */
#define ICTL(x)			((x<<1) & 0x0006)
#define ENABLE_RESET		0x00000000	/* Set Watchdog Timer to generate reset */
#define ENABLE_NMI		0x00000002	/* Set Watchdog Timer to generate non-maskable interrupt */
#define ENABLE_GPI		0x00000004	/* Set Watchdog Timer to generate general-purpose interrupt */
#define DISABLE_EVT		0x00000006	/* Disable Watchdog Timer interrupts */

#define TMR_EN			0x0000
#define TMR_DIS			0x0AD0
#define TRO			0x8000

#define ICTL_P0			0x01
#define ICTL_P1			0x02
#define TRO_P			0x0F

/* RTC_STAT and RTC_ALARM register */
#define	RTSEC			0x0000003F	/* Real-Time Clock Seconds */
#define	RTMIN			0x00000FC0	/* Real-Time Clock Minutes */
#define	RTHR			0x0001F000	/* Real-Time Clock Hours */
#define	RTDAY			0xFFFE0000	/* Real-Time Clock Days */

/* RTC_ICTL register */
#define	SWIE			0x0001	/* Stopwatch Interrupt Enable */
#define	AIE			0x0002	/* Alarm Interrupt Enable */
#define	SIE			0x0004	/* Seconds (1 Hz) Interrupt Enable */
#define	MIE			0x0008	/* Minutes Interrupt Enable */
#define	HIE			0x0010	/* Hours Interrupt Enable */
#define	DIE			0x0020	/* 24 Hours (Days) Interrupt Enable */
#define	DAIE			0x0040	/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
#define	WCIE			0x8000	/* Write Complete Interrupt Enable */

/* RTC_ISTAT register */
#define	SWEF			0x0001	/* Stopwatch Event Flag */
#define	AEF			0x0002	/* Alarm Event Flag */
#define	SEF			0x0004	/* Seconds (1 Hz) Event Flag */
#define	MEF			0x0008	/* Minutes Event Flag */
#define	HEF			0x0010	/* Hours Event Flag */
#define	DEF			0x0020	/* 24 Hours (Days) Event Flag */
#define	DAEF			0x0040	/* Day Alarm (Day, Hour, Minute, Second) Event Flag */
#define	WPS			0x4000	/* Write Pending Status (RO) */
#define	WCOM			0x8000	/* Write Complete */

/* RTC_FAST Mask (RTC_PREN Mask) */
#define ENABLE_PRESCALE		0x00000001	/* Enable prescaler so RTC runs at 1 Hz */
#define PREN			0x00000001	/* ** Must be set after power-up for proper operation of RTC */

/*
 * UART CONTROLLER MASKS
 */

/* UART_LCR Register */
#define DLAB			0x80
#define SB			0x40
#define STP			0x20
#define EPS			0x10
#define PEN			0x08
#define STB			0x04
#define WLS(x)			((x-5) & 0x03)

#define DLAB_P			0x07
#define SB_P			0x06
#define STP_P			0x05
#define EPS_P			0x04
#define PEN_P			0x03
#define STB_P			0x02
#define WLS_P1			0x01
#define WLS_P0			0x00

/* UART_MCR Register */
#define LOOP_ENA		0x10
#define LOOP_ENA_P		0x04

/* UART_LSR Register */
#define TEMT			0x40
#define THRE			0x20
#define BI			0x10
#define FE			0x08
#define PE			0x04
#define OE			0x02
#define DR			0x01

#define TEMP_P			0x06
#define THRE_P			0x05
#define BI_P			0x04
#define FE_P			0x03
#define PE_P			0x02
#define OE_P			0x01
#define DR_P			0x00

/* UART_IER Register */
#define ELSI			0x04
#define ETBEI			0x02
#define ERBFI			0x01

#define ELSI_P			0x02
#define ETBEI_P			0x01
#define ERBFI_P			0x00

/* UART_IIR Register */
#define STATUS(x)		((x << 1) & 0x06)
#define NINT			0x01
#define STATUS_P1		0x02
#define STATUS_P0		0x01
#define NINT_P			0x00

/* UART_GCTL Register */
#define FFE			0x20
#define FPE			0x10
#define RPOLC			0x08
#define TPOLC			0x04
#define IREN			0x02
#define UCEN			0x01

#define FFE_P			0x05
#define FPE_P			0x04
#define RPOLC_P			0x03
#define TPOLC_P			0x02
#define IREN_P			0x01
#define UCEN_P			0x00

/*
 * SERIAL PORT MASKS
 */
/* SPORTx_TCR1 Masks */
#define TSPEN    		0x0001	/* TX enable */
#define ITCLK    		0x0002	/* Internal TX Clock Select */
#define TDTYPE			0x000C	/* TX Data Formatting Select */
#define TLSBIT			0x0010	/* TX Bit Order */
#define ITFS			0x0200	/* Internal TX Frame Sync Select */
#define TFSR			0x0400	/* TX Frame Sync Required Select */
#define DITFS			0x0800	/* Data Independent TX Frame Sync Select */
#define LTFS			0x1000	/* Low TX Frame Sync Select */
#define LATFS			0x2000	/* Late TX Frame Sync Select */
#define TCKFE			0x4000	/* TX Clock Falling Edge Select */

/* SPORTx_TCR2 Masks */
#define SLEN			0x001F	/*TX Word Length */
#define TXSE			0x0100	/*TX Secondary Enable */
#define TSFSE			0x0200	/*TX Stereo Frame Sync Enable */
#define TRFST			0x0400	/*TX Right-First Data Order */

/* SPORTx_RCR1 Masks */
#define RSPEN			0x0001	/* RX enable */
#define IRCLK			0x0002	/* Internal RX Clock Select */
#define RDTYPE			0x000C	/* RX Data Formatting Select */
#define RULAW			0x0008	/* u-Law enable */
#define RALAW			0x000C	/* A-Law enable */
#define RLSBIT			0x0010	/* RX Bit Order */
#define IRFS			0x0200	/* Internal RX Frame Sync Select */
#define RFSR			0x0400	/* RX Frame Sync Required Select */
#define LRFS			0x1000	/* Low RX Frame Sync Select */
#define LARFS			0x2000	/* Late RX Frame Sync Select */
#define RCKFE			0x4000	/* RX Clock Falling Edge Select */

/* SPORTx_RCR2 Masks */
#define SLEN			0x001F	/* RX Word Length */
#define RXSE			0x0100	/* RX Secondary Enable */
#define RSFSE			0x0200	/* RX Stereo Frame Sync Enable */
#define RRFST			0x0400	/* Right-First Data Order */

/* SPORTx_STAT Masks */
#define RXNE			0x0001	/* RX FIFO Not Empty Status */
#define RUVF			0x0002	/* RX Underflow Status */
#define ROVF			0x0004	/* RX Overflow Status */
#define TXF			0x0008	/* TX FIFO Full Status */
#define TUVF			0x0010	/* TX Underflow Status */
#define TOVF			0x0020	/* TX Overflow Status */
#define TXHRE			0x0040	/* TX Hold Register Empty */

/* SPORTx_MCMC1 Masks */
#define WSIZE			0x0000F000	/* Multichannel Window Size Field */
#define WOFF			0x000003FF	/* /Multichannel Window Offset Field */

/* SPORTx_MCMC2 Masks */
#define MCCRM			0x00000003	/* Multichannel Clock Recovery Mode */
#define MCDTXPE			0x00000004	/* Multichannel DMA Transmit Packing */
#define MCDRXPE			0x00000008	/* Multichannel DMA Receive Packing */
#define MCMEN			0x00000010	/* Multichannel Frame Mode Enable */
#define FSDR			0x00000080	/* Multichannel Frame Sync to Data Relationship */
#define MFD			0x0000F000	/* Multichannel Frame Delay */

/*
 * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS
 */

/* PPI_CONTROL Masks */
#define PORT_EN			0x00000001	/* PPI Port Enable */
#define PORT_DIR		0x00000002	/* PPI Port Direction */
#define XFR_TYPE		0x0000000C	/* PPI Transfer Type */
#define PORT_CFG		0x00000030	/* PPI Port Configuration */
#define FLD_SEL			0x00000040	/* PPI Active Field Select */
#define PACK_EN			0x00000080	/* PPI Packing Mode */
#define DMA32			0x00000100	/* PPI 32-bit DMA Enable */
#define SKIP_EN			0x00000200	/* PPI Skip Element Enable */
#define SKIP_EO			0x00000400	/* PPI Skip Even/Odd Elements */
#define DLENGTH			0x00003800	/* PPI Data Length */
#define DLEN_8			0x0	/* PPI Data Length mask for DLEN=8 */
#define DLEN(x)			(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
#define POL			0x0000C000	/* PPI Signal Polarities */

/* PPI_STATUS Masks */
#define FLD			0x00000400	/* Field Indicator */
#define FT_ERR			0x00000800	/* Frame Track Error */
#define OVR			0x00001000	/* FIFO Overflow Error */
#define UNDR			0x00002000	/* FIFO Underrun Error */
#define ERR_DET			0x00004000	/* Error Detected Indicator */
#define ERR_NCOR		0x00008000	/* Error Not Corrected Indicator */

/*
 * DMA CONTROLLER MASKS
 */

/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
#define DMAEN			0x00000001	/* Channel Enable */
#define WNR			0x00000002	/* Channel Direction (W/R*) */
#define WDSIZE_8		0x00000000	/* Word Size 8 bits */
#define WDSIZE_16		0x00000004	/* Word Size 16 bits */
#define WDSIZE_32		0x00000008	/* Word Size 32 bits */
#define DMA2D			0x00000010	/* 2D/1D* Mode */
#define RESTART			0x00000020	/* Restart */
#define DI_SEL			0x00000040	/* Data Interrupt Select */
#define DI_EN			0x00000080	/* Data Interrupt Enable */
#define NDSIZE			0x00000900	/* Next Descriptor Size */
#define FLOW			0x00007000	/* Flow Control */

#define DMAEN_P			0	/* Channel Enable */
#define WNR_P			1	/* Channel Direction (W/R*) */
#define DMA2D_P			4	/* 2D/1D* Mode */
#define RESTART_P		5	/* Restart */
#define DI_SEL_P		6	/* Data Interrupt Select */
#define DI_EN_P			7	/* Data Interrupt Enable */

/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
#define DMA_DONE		0x00000001	/* DMA Done Indicator */
#define DMA_ERR			0x00000002	/* DMA Error Indicator */
#define DFETCH			0x00000004	/* Descriptor Fetch Indicator */
#define DMA_RUN			0x00000008	/* DMA Running Indicator */

#define DMA_DONE_P		0	/* DMA Done Indicator */
#define DMA_ERR_P		1	/* DMA Error Indicator */
#define DFETCH_P		2	/* Descriptor Fetch Indicator */
#define DMA_RUN_P		3	/* DMA Running Indicator */

/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE			0x00000040	/* DMA Channel Type Indicator */
#define CTYPE_P			6	/* DMA Channel Type Indicator BIT POSITION */
#define PCAP8			0x00000080	/* DMA 8-bit Operation Indicator */
#define PCAP16			0x00000100	/* DMA 16-bit Operation Indicator */
#define PCAP32			0x00000200	/* DMA 32-bit Operation Indicator */
#define PCAPWR			0x00000400	/* DMA Write Operation Indicator */
#define PCAPRD			0x00000800	/* DMA Read Operation Indicator */
#define PMAP			0x00007000	/* DMA Peripheral Map Field */

/*
 * GENERAL PURPOSE TIMER MASKS
 */

/* PWM Timer bit definitions */

/* TIMER_ENABLE Register */
#define TIMEN0			0x0001
#define TIMEN1			0x0002
#define TIMEN2			0x0004

#define TIMEN0_P		0x00
#define TIMEN1_P		0x01
#define TIMEN2_P		0x02

/* TIMER_DISABLE Register */
#define TIMDIS0			0x0001
#define TIMDIS1			0x0002
#define TIMDIS2			0x0004

#define TIMDIS0_P		0x00
#define TIMDIS1_P		0x01
#define TIMDIS2_P		0x02

/* TIMER_STATUS Register */
#define TIMIL0			0x0001
#define TIMIL1			0x0002
#define TIMIL2			0x0004
#define TOVL_ERR0		0x0010
#define TOVL_ERR1		0x0020
#define TOVL_ERR2		0x0040
#define TRUN0			0x1000
#define TRUN1			0x2000
#define TRUN2			0x4000

#define TIMIL0_P		0x00
#define TIMIL1_P		0x01
#define TIMIL2_P		0x02
#define TOVL_ERR0_P		0x04
#define TOVL_ERR1_P		0x05
#define TOVL_ERR2_P		0x06
#define TRUN0_P			0x0C
#define TRUN1_P			0x0D
#define TRUN2_P			0x0E

/* TIMERx_CONFIG Registers */
#define PWM_OUT			0x0001
#define WDTH_CAP		0x0002
#define EXT_CLK			0x0003
#define PULSE_HI		0x0004
#define PERIOD_CNT		0x0008
#define IRQ_ENA			0x0010
#define TIN_SEL			0x0020
#define OUT_DIS			0x0040
#define CLK_SEL			0x0080
#define TOGGLE_HI		0x0100
#define EMU_RUN			0x0200
#define ERR_TYP(x)		((x & 0x03) << 14)

#define TMODE_P0		0x00
#define TMODE_P1		0x01
#define PULSE_HI_P		0x02
#define PERIOD_CNT_P		0x03
#define IRQ_ENA_P		0x04
#define TIN_SEL_P		0x05
#define OUT_DIS_P		0x06
#define CLK_SEL_P		0x07
#define TOGGLE_HI_P		0x08
#define EMU_RUN_P		0x09
#define ERR_TYP_P0		0x0E
#define ERR_TYP_P1		0x0F

/*
 * PROGRAMMABLE FLAG MASKS
 */

/* General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
#define PF0			0x0001
#define PF1			0x0002
#define PF2			0x0004
#define PF3			0x0008
#define PF4			0x0010
#define PF5			0x0020
#define PF6			0x0040
#define PF7			0x0080
#define PF8			0x0100
#define PF9			0x0200
#define PF10			0x0400
#define PF11			0x0800
#define PF12			0x1000
#define PF13			0x2000
#define PF14			0x4000
#define PF15			0x8000

/* General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
#define PF0_P			0
#define PF1_P			1
#define PF2_P			2
#define PF3_P			3
#define PF4_P			4
#define PF5_P			5
#define PF6_P			6
#define PF7_P			7
#define PF8_P			8
#define PF9_P			9
#define PF10_P			10
#define PF11_P			11
#define PF12_P			12
#define PF13_P			13
#define PF14_P			14
#define PF15_P			15

/*
 * SERIAL PERIPHERAL INTERFACE (SPI) MASKS
 */

/* SPI_CTL Masks */
#define TIMOD			0x00000003	/* Transfer initiation mode and interrupt generation */
#define SZ			0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM			0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE			0x00000010	/* Enable (=1) Slave-Select input for Master. */
#define EMISO			0x00000020	/* Enable (=1) MISO pin as an output. */
#define SIZE			0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF			0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA			0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL			0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR			0x00001000	/* Configures SPI as master (=1) or slave (=0) */
#define WOM			0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE			0x00004000	/* SPI module enable (=1), disable (=0) */

/* SPI_FLG Masks */
#define FLS1			0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2			0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3			0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4			0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5			0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6			0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7			0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1			0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2			0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3			0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4			0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5			0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6			0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7			0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_FLG Bit Positions */
#define FLS1_P			0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P			0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P			0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P			0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P			0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P			0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P			0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P			0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLG2_P			0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P			0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLG4_P			0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLG5_P			0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLG6_P			0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLG7_P			0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_STAT Masks */
#define SPIF			0x00000001	/* Set (=1) when SPI single-word transfer complete */
#define MODF			0x00000002	/* Set(=1)in a master device when some other device tries to become master */
#define TXE			0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS			0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY			0x00000010	/* Set (=1) when data is received with RDBR full */
#define RXS			0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
#define TXCOL			0x00000040	/* When set (=1), corrupt data may have been transmitted */

/*
 * ASYNCHRONOUS MEMORY CONTROLLER MASKS
 */

/* AMGCTL Masks */
#define AMCKEN			0x00000001	/* Enable CLKOUT */
#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */

/* AMGCTL Bit Positions */
#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */

/* AMBCTL0 Masks */
#define B0RDYEN			0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
#define B0RDYPOL		0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
#define B0TT_1			0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
#define B0TT_2			0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
#define B0TT_3			0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
#define B0TT_4			0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
#define B0ST_1			0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
#define B0ST_2			0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
#define B0ST_3			0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
#define B0ST_4			0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
#define B0HT_1			0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
#define B0HT_2			0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
#define B0HT_3			0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
#define B0HT_0			0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */

/* AMBCTL1 Masks */
#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */

/*
 * SDRAM CONTROLLER MASKS
 */

/* SDGCTL Masks */
#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
#define PFE			0x00000010	/* Enable SDRAM prefetch */
#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
#define PUPSD			0x00200000	/* Power-up start delay */
#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
#define PSS			0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
#define EBUFE			0x02000000	/* Enable external buffering timing */
#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
#define EMREN			0x10000000	/* Extended mode register enable */
#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */

/* EBIU_SDBCTL Masks */
#define EBE			0x00000001	/* Enable SDRAM external bank */
#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
#define EBSZ_128		0x00000006	/* SDRAM external bank size = 128MB */
#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_10		0x00000020	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_11		0x00000030	/* SDRAM external bank column address width = 9 bits */

/* EBIU_SDSTAT Masks */
#define SDCI			0x00000001	/* SDRAM controller is idle */
#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
#define SDPUA			0x00000004	/* SDRAM power up active */
#define SDRS			0x00000008	/* SDRAM is in reset state */
#define SDEASE			0x00000010	/* SDRAM EAB sticky error status - W1C */
#define BGSTAT			0x00000020	/* Bus granted */

#endif	/* _DEF_BF532_H */