1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/*
* Copyright (C) 2006 Atmel Corporation
*
* Configuration settings for the AVR32 Network Gateway
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
#define CONFIG_ATNGW100 1
#define CFG_HZ 1000
/*
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
* and the PBA bus to run at 1/4 the PLL frequency.
*/
#define CONFIG_PLL 1
#define CFG_POWER_MANAGER 1
#define CFG_OSC0_HZ 20000000
#define CFG_PLL0_DIV 1
#define CFG_PLL0_MUL 7
#define CFG_PLL0_SUPPRESS_CYCLES 16
#define CFG_CLKDIV_CPU 0
#define CFG_CLKDIV_HSB 1
#define CFG_CLKDIV_PBA 2
#define CFG_CLKDIV_PBB 1
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
* ivco = PLLOPT<1:0>
*
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
*/
#define CFG_PLL0_OPT 0x04
#define CONFIG_USART1 1
/* User serviceable stuff */
#define CONFIG_DOS_PARTITION 1
#define CONFIG_CMDLINE_TAG 1
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \
"fsload; bootm"
/*
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
* data on the serial line may interrupt the boot sequence.
*/
#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot in %d seconds\n"
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
* After booting the board for the first time, new ethernet addresses
* should be generated and assigned to the environment variables
* "ethaddr" and "eth1addr". This is normally done during production.
*/
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
/*
* BOOTP/DHCP options
*/
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_DOS_PARTITION 1
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
#define CONFIG_PIO2 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
#define CONFIG_MMC 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_BASE 0x00000000
#define CFG_FLASH_SIZE 0x800000
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 135
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_INTRAM_BASE 0x24000000
#define CFG_INTRAM_SIZE 0x8000
#define CFG_SDRAM_BASE 0x10000000
#define CFG_SDRAM_16BIT 1
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
#define CFG_MALLOC_END \
({ \
DECLARE_GLOBAL_DATA_PTR; \
CFG_SDRAM_BASE + gd->sdram_size; \
})
#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
#define CFG_PROMPT "Uboot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
#define CFG_MEMTEST_START \
({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
#define CFG_MEMTEST_END \
({ \
DECLARE_GLOBAL_DATA_PTR; \
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
})
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __CONFIG_H */
|
