net: stmmac: add helpers to indicate WoL enable status

Add two helpers to abstract the WoL enable status at the PHY and MAC to
make the code easier to read.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1umsfP-008vKp-U1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 17 insertions, 8 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b16b8aeeb583..78d6b3737a26 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -375,6 +375,16 @@ enum stmmac_state {
 
 extern const struct dev_pm_ops stmmac_simple_pm_ops;
 
+static inline bool stmmac_wol_enabled_mac(struct stmmac_priv *priv)
+{
+	return priv->plat->pmt && device_may_wakeup(priv->device);
+}
+
+static inline bool stmmac_wol_enabled_phy(struct stmmac_priv *priv)
+{
+	return !priv->plat->pmt && device_may_wakeup(priv->device);
+}
+
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index db0433d0ce40..b9e8df90e7b5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7857,7 +7857,7 @@ int stmmac_suspend(struct device *dev)
 		priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
 
 	/* Enable Power down mode by programming the PMT regs */
-	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+	if (stmmac_wol_enabled_mac(priv)) {
 		stmmac_pmt(priv, priv->hw, priv->wolopts);
 		priv->irq_wake = 1;
 	} else {
@@ -7868,11 +7868,10 @@ int stmmac_suspend(struct device *dev)
 	mutex_unlock(&priv->lock);
 
 	rtnl_lock();
-	if (device_may_wakeup(priv->device) && !priv->plat->pmt)
+	if (stmmac_wol_enabled_phy(priv))
 		phylink_speed_down(priv->phylink, false);
 
-	phylink_suspend(priv->phylink,
-			device_may_wakeup(priv->device) && priv->plat->pmt);
+	phylink_suspend(priv->phylink, stmmac_wol_enabled_mac(priv));
 	rtnl_unlock();
 
 	if (stmmac_fpe_supported(priv))
@@ -7948,7 +7947,7 @@ int stmmac_resume(struct device *dev)
 	 * this bit because it can generate problems while resuming
 	 * from another devices (e.g. serial console).
 	 */
-	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+	if (stmmac_wol_enabled_mac(priv)) {
 		mutex_lock(&priv->lock);
 		stmmac_pmt(priv, priv->hw, 0);
 		mutex_unlock(&priv->lock);
@@ -8008,7 +8007,7 @@ int stmmac_resume(struct device *dev)
 	 * workqueue thread, which will race with initialisation.
 	 */
 	phylink_resume(priv->phylink);
-	if (device_may_wakeup(priv->device) && !priv->plat->pmt)
+	if (stmmac_wol_enabled_phy(priv))
 		phylink_speed_up(priv->phylink);
 
 	rtnl_unlock();
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index c849676d98e8..a3e077f225d1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -934,7 +934,7 @@ static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev)
 	if (!netif_running(ndev))
 		return 0;
 
-	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+	if (!stmmac_wol_enabled_mac(priv)) {
 		/* Disable clock in case of PWM is off */
 		clk_disable_unprepare(priv->plat->clk_ptp_ref);
 
@@ -955,7 +955,7 @@ static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev)
 	if (!netif_running(ndev))
 		return 0;
 
-	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+	if (!stmmac_wol_enabled_mac(priv)) {
 		/* enable the clk previously disabled */
 		ret = pm_runtime_force_resume(dev);
 		if (ret)